• 한국광학회지
• /
• 제19권6호
• /
• pp.394-399
• /
• 2008

본 논문에서는 집적영상의 문제점인 깊이감 제한 문제를 해결하기 위해서 편광된 광과 복굴절 매질인 액정 렌즈어레이를 이용한 집적영상 시스템을 제안하고 구현하였다. 제안된 렌즈어레이는 두 개의 유리 렌즈어레이 위에 서로 다른 ZLI-4119와 E-7 액정을 증착하여 구현하였다. 액정은 편광 방향에 따라서 굴절률이 서로 다르기 때문에 두 개의 중심깊이 평면을 얻을 수 있다. 이로 인하여 초점 영역의 변화를 얻을 수 있으며 이로 인해 복원 시 깊이감을 향상시킬 수 있다. $LightTools^{(R)}$ 프로그램을 이용하여 집적영상 시스템을 구현하였고, 굴절률 차에 의한 초점거리 변화를 확인하였다. 액정 디스플레이 공정을 이용하여 소자를 제작하였고, 광학 실험을 통하여 초점거리의 변화를 측정하였다. ZLI-4119 액정 렌즈어레이의 굴절률은 기본 렌즈어레이의 굴절률보다 작기 때문에 실상이 맺히게 되고, 초점거리는 약 680 mm였다. 반면에 E-7 액정 렌즈어레이의 경우에는 허상이 맺히게 되고, 이론적인 초점거리는 -29 mm였다.

• 한국정밀공학회지
• /
• 제29권4호
• /
• pp.395-408
• /
• 2012

An experimental investigation with 2.8kW Nd:YAG laser system was carried out to study the effects of different laser process parameters on the microstructure and hardness of STD11. The optical lens with the elliptical profile are designed to obtain a wide surface hardening area with uniform hardness. The Laser beam is allowed to scan on the surface of the work piece varying the power (1600, 1800 and 1900kW) and traverse speed (200, 400, 600, 800 and 1000mm/min) at three different F-numbers of lens. After laser surface treatment three zones, In the microstructure have been observed : melted zone(decarburization), heat affected zone(martensite), and the substrate.

• 생약학회지
• /
• 제25권1호
• /
• pp.41-46
• /
• 1994

The ether, ethylacetate and n-butanol soluble fractions from the roots of Scutellaria baicalensis showed a significant inhibition of lens aldose reductase (AR) activity in vitro. During systematic fractionation of the active fractions, 7 flavonoids were isolated and compared their inhibitory activities against rat AR using DL-glyceraldehyde as a substrate, among which baicalin (VII) was found to exhibit the most potent inhibitory activity. Baicalin (VII) and wogonin-7-O-glucuronide (VI), with repeated treatments (30 mg/kg/day, i.p.) throughout the experimental periods caused a significant suppression of cataract formation induced by galactose (40 g/kg/day) as well as the decrease of galactitol accumulation in the rat lens. The flavonoids also exhibited a significant inhibition of sorbitol accumulation in the lenses of diabetic rats induced by streptozotocin (STZ).

• 센서학회지
• /
• 제30권3호
• /
• pp.148-153
• /
• 2021

During the manufacture of a ZnS lens with excellent transmittance in the mid-infrared region (3-5 ㎛) by the hot-press process, a single-layer sintering method is used in which one lens is manufactured in one process. Additional research is required to improve this single-layer sintering method because of its low manufacturing efficiency. To solve this problem, the variation in optical properties of ZnS lenses with change in sintering temperature was investigated by introducing a Stack sintering method that can sinter multiple lenses simultaneously. A carbon paper was placed between the molded lenses and sintered into five layers. The average permeability of 67% at medium infrared wavelengths of 3-5 ㎛ was excellent under the following sintering conditions: pressure of 50 MPa and temperature of 850℃. This value is 1% less than the average permeability in the case of single-layer sintering of the ZnS lens. It was confirmed that the stack sintering method developed in this study can be used to manufacture a large number of lenses with excellent characteristics in a single process.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.962-967
• /
• 2017

The Diamond-Like-Carbon (DLC) coating is a new carbon-based amorphous material. Carbon ions in the plasma are electrically accelerated and collide with the substrate to form a thin film. This film has similar properties to diamonds such as high surface hardness, low coefficient of friction, corrosion resistance and durability that do not react with acids and bases. Also, since there is no thermal deformation, it can be printed at room temperature. and coated on almost all materials such as paper, polymer, ceramics and various metals even aspheric lens it is possible to mirror surface coating with excellent surface roughness. In this paper, we have analyzed the DLC film formed by Filtered Arc Ion Plating (Filtered AIP) process.

• 한국정밀공학회지
• /
• 제27권10호
• /
• pp.93-99
• /
• 2010

A nano-stereolithography is the direct patterning process with a nanoscale resolution using twophoton absorption induced by a femtosecond laser. However, in the majority of the works, the fabrication of 3D microstructures have been done only onto transparent glass due to the use of an oil immersion objective lens for achieving a high resolution. In this work, the coaxial illumination and the auto-focusing system are proposed for the direct patterning of nano-precision patterns on an opaque substrate such as a silicon wafer and a metal substrate. Through this work, 3D polymer structures and metallic patterns are fabricated on a silicon wafer using the developed process.

• 한국안광학회지
• /
• 제13권1호
• /
• pp.53-58
• /
• 2008

목적: 안경렌즈용 소형 suptter coating system을 설계하고 제작하고자 한다. 방법: sputter system의 target 설계에 있어서 Essential Macleod thinfilm design software를 이용해 AR 코팅과 mirror 코팅이 동시에 설계 가능한 Si target 을 결정하였으며. 그 후 sputtering 장비를 제작하였다. 결과: $SiO_2$와 $Si_3N_4$의 5층 박막으로 구성되는 AR 코팅의 최적조건은 [air|$SiO_2$(81.3)|$Si_3N_4$(102)|$SiO_2$(19.21)|$Si_3N_4$(15.95)| $SiO_2$(102)|glass] 이였다. Mirror 코팅의 경우, blue color 코팅의 최적조건은 [air|$SiO_2$(56.61)|$Si_3N_4$(135.86)|$SiO_2$(67.64)| $Si_3N_4$(55.4)|$SiO_2$ (53.53)|$Si_3N_4$(51.28)|glass] 이고, green color 코팅의 최적조건은 [air|$SiO_2$(66.2)|$Si_3N_4$(22.76)|$SiO_2$(56.58)| $Si_3N_4$(140.35) |$SiO_2$(152.35)|$Si_3N_4$(70.16)|$SiO_2$(121.87)|glass] 이였으며, gold color 코팅의 최적조건은 [air|$SiO_2$(83.59)|$Si_3N_4$(144.86) |$SiO_2$(11.82)|$Si_3N_4$(129.93)|$SiO_2$(90.01)|$Si_3N_4$(88.37)|glass] 이였다. 결론: 코팅 시간을 줄여 안경단가를 줄이기 위하여 안경렌즈 코팅 시 렌즈의 전 후면을 동시에 코팅을 해야 하기 때문에 sputtering장비 설계를 할 때 안경렌즈 전면과 후면에 동일하게 Si target을 갖춘 cathode를 사용하였고, 렌즈의 곡률을 고려하여 각 층이 동일하게 코팅이 되어야 하기 때문에 target-substrate 간의 간격은 12.5 cm에서 20 cm로 가변할 수 있도록 설계하고 제작하였다. 고품질의 안경렌즈 코팅을 위하여 고진공 펌프로 turbo pump를 이용하였으며, 코팅박막의 균일함을 얻기 위해서 치구를 회전할 수 있도록 설계하고 제작하였다.

• 정보저장시스템학회논문집
• /
• 제5권2호
• /
• pp.64-69
• /
• 2009

In this paper, we investigate field distribution and interference pattern in the exit pupil and in the focal region. Also, we compare with metal and dielectric substrate for near-field recording. To obtain field distribution, we use modified vector diffraction theory and Zernike Polynomials. Finally, we design and optimize refractive index and thickness of disk for near-field surface recording and cover-layer incident recording.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.344-347
• /
• 2014

This study was carried out on DLC thin film deposition technology used in infrared optical system production as a method of reducing the shape changes of the molding core and the consequent loss of life. Experiments on the deposition on silicon wafer and tungsten carbide used as a substrate for molding core were conducted at each processing condition using a filtered arc system, and it was found that the surface and mechanical properties were of the greatest quality when the substrate bias voltage of -150 V was used. In addition, it was confirmed that the PV and Ra characteristics were improved by the deposition of the DLC thin film.

• 한국광학회지
• /
• 제9권2호
• /
• pp.51-58
• /
• 1998

엄밀한 기하광학적 광선추적을 이용하여, 2차원 TPHK가 푸리에변환 렌즈로 사용될 때, 표면양각형태에 따른 특성을 분석하였다. 2차원 TPHK(F/8, 초점거리 15 mm)의 기판두께가 0, 50$\mu\textrm{m}$인 두 경우에 있어서, 표면양각형태를 평면-볼록면에서 볼록면-평면까지 51단계로 나누어, 세가지 입사각($0^{\circ},{2.5}^{\circ},5^{\circ}$)에 대한 광선추적을 실시하였다. 광선추적의 결과로 얻은 rms 스폿크기, $f{\sin}{\theta}$위치에 대한 rms편차, 최고점위치, FWHM(full width at half maximum), 추적에서 제외된 광선수 등을 평가 기준으로 사용하였는데, 그 결과, 기판의 유무에 무관하게, 표면양각높이의 80%가 상면 쪽에 존재하는 양볼록 형태를 가지는 TPHK가 푸리에변환 렌즈로서 가장 우수한 것으로 나타났다.