• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.400-405
• /
• 2011

The total length of Korean urban railways reaches 1,200km. Urban railway used to be installed with ballasted tracks by reason of low cost at the time of construction, slab tracks are now being installed due to the reasons of the improvement in safety, lengthening service life and more economical method in terms of maintenance. The length rate of slab tracks has exceeded 70% of the domestic urban railways with the methods ranging from STEDEF, LVT, ALT, Eidan-type, B2S to RHEDA. This study surveyed the share of domestic slab tracks, and compared and evaluated the input cost at the initial stage by the types of slab tracks. Construction processes have been standardized by the existing design documents and calculated the initial input cost for the length of 1km of a hypothetical straight line. Cost breakdown structure was evaluated as materials cost, construction cost, equipment cost, indirect cost, etc. It is expected that this study will be used in selection & evaluation which is considering the economic feasibility of slab tracks.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.104-119
• /
• 1998

The purpose of this study was pertinent design of the framework of the fixed bone anchored bridge using implants in the edentulous mandible through analysis of stress distribution by the three dimensional finite element analysis method. The results were as follows: 1. The L-shaped framework was favorable in restoring the edentulous mandible by implants and fixed bone anchored bridge. 2. The structure of the framework should be designed to endure the occlusal load because of stress concentration at the most distal abutment of the framework. 3. The stress at the distal implant where cantilever starts was twice as much as that of other portions. 4. Compressive stress was generated on the framework of the mesial side of the distal implant and extrusive force was induced to the mesially positioned implants. 5. The height of vertical plate was high as possible as can be to distribute stresses concentrating bucco-lingually and labio-lingually in the framework between abutments, 6. Reinforcement of the horizontal plate thickness was needed because stress was loaded more on the horizontal plate than on the vertical plate of the framework. 7. Lengthening of the vertical plate can compensate for any limitations in horizontal plate width.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.4
• /
• pp.301-307
• /
• 2006

The subgingival fracture near the alveolar bone is difficult to treat. This fractured tooth will be treated by many methods. First approach is to preserve the fractured tooth. Periodontal surgery has been used to lengthen the clinical crown, thereby allowing the tooth to be restored. Another method is erupting the tooth with orthodontic eruption (forced eruption) or surgical extrusion. Second approach is the restoration after extraction of the subgingivally fractured tooth. This is restorative with conventional fixed partial denture or implant. This article presents the variable restorative approach of subgingivally fractured upper incisor.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.7
• /
• pp.1834-1844
• /
• 1996

In asynchronous communication data of specific area are used as all kinds of control characters. Therefore, data of this area must be converted to other character and transmitted followed by control prefix to prevent the misconception as control characters. This paper presents several methods for character conversion that prevent the lengthening of data and enhance the overall efficiency of communication by transmitting with a certain conversion and without control prefixes on control-like characters occurring when data are transmitted with ciphering onto asynchronous communication path. For such conversion, the scope of transmitted data was sup-posed and efforts were made not to exceed that scope. Experiments showed that method is better in communication speed than the existing ones and the ciphering has no problem by confirming the randomness of ciphered data.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.2
• /
• pp.226-232
• /
• 1995

Survival rate of osteosarcoma has been improved recently due to the neoadjuvant and adjuvant chemotherapy. Limb-salvaging operation(LSO) has replaced the amputation technique without' lowering the survival rate. And there occurred a lot of patients who are suffering from the high cost of artificial implants and forced to choose amputation due to economic problem. In LSO, usually relatively high cost artifical implant is needed. When a patient and not afford such an expensive implant he had to choose an inexpensive way, amputation. Authors tried bone lengthening by adopting Ilizarov technique after wide resection of tumor in two patients. Bone transportation was successful in one patient and less successful in the other. One case in CDF(continuosly disease free since the surgical procedure) state at follow-up 3 year 4 months after knee joint fusion. And the other was given lobectomy for lung metastasis at postop. 1 year and 9 months, and given osteosynthesis for infected nonunion at the docking site. Bone transportation was thought to be a good method for the bony coverage of dead space caused by wide resection. Bone transportation technique was economical as well as biological We present two osteosarcoma patient who treated with Ilizarov bone transportation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.5
• /
• pp.495-499
• /
• 2008

For the successful placement of dental implants, adequate alveolar bone height and width are required. Alveolar distraction osteogenesis is an effective method that resolves insufficient alveolar bone height for dental implant placement, and thus has been clinically applied with satisfactory results. But, minor and major problems may occur during the treatment. In the following report, we studied for such problematic cases. The problems are as follows: 1) sharp edges of the transport segment, 2) infection, 3) soft tissue dehiscence, 4) limitation of distraction, 5) numbness, 6) insufficient bone formation. But, most of them were answered by simple solutions and did not jeopardize the final outcomes. Distraction osteogenesis can be considered a safe and predictable procedure for lengthening the alveolar bone.

• The Journal of Korean Physical Therapy
• /
• v.24 no.3
• /
• pp.208-215
• /
• 2012

Purpose: We attempt to assess the differences in the degree of lumbar lordosis in patients with lower back pain caused by the herniation of the nucleus pulposus and in normal people (divided into male and female groups). Methods: This study was conducted with 14 patients (7 males, 7 females) diagnosed with, and being treated for, lumbar herniated nucleus pulposus and 14 normal people (7 males, 7 females). In order to examine the degree of lumbar lordosis in these subjects, hip flexor lengthening tests were conducted and the lumbar curves were measured in three postures (supine, sitting, and prone) and the results were compared. Results: The measured values of the curves for the standing and prone postures showed statistically significant differences between the normal group and the patient group, between the normal male group and the male patient group, and between the normal female group and the female patient group (p<0.05). Conclusion: The measurement method that uses flexible curve rulers in the standing or prone postures can be usefully utilized in assessing the lumbar lordosis of patients with lumbar herniation of the nucleus pulposus.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.152-158
• /
• 2006

The objective of this work is to develop the knee joint model for representing various pendulum motions and quantifying the spasticity. Knee joint model included the extension and flexion muscles. The joint moment consists of both the active moment from the stretch reflex and the passive moment from the viscoelastic joint properties. The stretch reflex was modeled as nonlinear feedback of muscle length and the muscle lengthening velocity, which is Physiologically-feasible. Moreover, we modeled the spastic reflex as having dynamic threshold to account far the various pendulum trajectories of spastic patients. We determined the model parameters of three patients who showed different pendulum trajectories through minimization of error between experimental and simulated trajectories. The simulated joint trajectories closely matched with the experimental ones, which show the proposed model can predict pendulum motions of patients with different spastic severities. The predicted muscle force from spastic reflex appeared more frequently in the severe spastic patient, which indicates the dynamic threshold relaxes slowly in this patient as is manifested by the variation coefficient of dynamic threshold. The proposed method provides prediction of muscle force and intuitive and objective evaluation of spasticity and it is expected to be useful in quantitative assessment of spasticity.

• Korean Journal of Veterinary Research
• /
• v.2 no.2
• /
• pp.15-24
• /
• 1962

In the previous report it was demonstrated that aqueous extracts of two Korean indigenous crude drugs, Radix Jingyu and Fructus ponciri, have an excellent tick repellent effect, and also the need for further analytical study of these crude drugs was suggested. In the experiments to be reported herein, attempts were made to find out the active ingredients from Radix Jingyu, since the aqueons extract of Radix Jingyu proved to be mone effective than that of Fructus ponciri. It will be shown that the active ingredient is indicative of Lycaconitine, a known alkaloid. An aqueons solution containing 1.5 Gms of Lycaconitine in tartrate when sprayed on a cow exerted tick repellent effect against Boophilus microplus which lasted approximately 25 days without any harmful influences on cattle. It will also be shown that the oil-fat components of Radix Jingyu act synergistically with Lycaconitine in accelerating and lengthening the effect, although the components alone have no effect under the conditions tested. It was of interest to note that the oil-fat components of Radix Jingyu showed definite repellent effect against the larvae of Boophilus microplus in laboratory experiments by the method newly devised. On the basis of these observations, it was concluded that Lycaconitine can be used as cattle tick repellent, and the evidence seems to warrant a large scale production of Lycaconitine for its widespread use. Further studies on the possible effect of the alkaloid on other genera or species of ticks and related vermins were also indicated.

• Structural Engineering and Mechanics
• /
• v.45 no.6
• /
• pp.741-758
• /
• 2013

In this study, inelastic displacement ratios are investigated for existing systems with known lateral strength considering soil structure interaction. For this purpose, SDOF systems for period range of 0.1-3.0 s with different hysteretic behaviors are considered for a number of 18 earthquake motions recorded on soft soil. The effect of stiffness degradation on inelastic displacement ratios is investigated. The Modified Clough model is used to represent structures that exhibit significant stiffness degradation when subjected to reverse cyclic loading and the elastoplastic model is used to represent non-degrading structures. Soil structure interaction analyses are conducted by means of equivalent fixed base model effective period, effective damping and effective ductility values differing from fixed-base case. For inelastic time history analyses, Newmark method for step by step time integration was adapted in an in-house computer program. A new equation is proposed for inelastic displacement ratio of system with SSI with elastoplastic or degrading behavior as a function of structural period ($\tilde{T}$), strength reduction factor (R) and period lengthening ratio ($\tilde{T}$/T). The proposed equation for $\tilde{C}_R$ which takes the soil-structure interaction into account should be useful in estimating the inelastic deformation of existing structures with known lateral strength.