• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.128-133
• /
• 2002

This study was conducted to investigate the influence of storage time on the sapstain development of Japanese red pine and Korean pine logs during storage in log yard, and their stain characteristics. Japanese red pine and Korean pine trees were harvested and cut into logs in mid January of 2001. These logs were transported to the two local sawmills where they were closely stacked in remote parts of log yard. The logs were then sampled destructively by cutting seven to nine 3-cm long discs along the length of each log at intervals of 3, 4, 5, 6, and 8 month after felling. The stain coverage and maximal radial penetration of stain were measured from the discs of the sampled logs after the isolation of causal staining fungi. The sapstain was primarily infested by the attack of bark beetles and the species of bark beetle was identified as Tomicus piniperda. The main fungal species isolated from stained wood was Ophiostoma species. Based on the present study, the logs could be stored in log yard until May without stain; but stain development was rapid after May and the severity of stain increased proportionally with storage time. Korean pine was more susceptible to fungal stain than Japanese red pine. During summer storage, decay started to develop in logs and the main species were identified as Tyromyces sp. and Schizophyllum commune. Information provided in this paper would be very useful to develop more effective control strategies for sapstain prevention in Japanese red pine and Korean pine logs.

• Tunnel and Underground Space
• /
• v.16 no.6 s.65
• /
• pp.506-525
• /
• 2006

For the design of large scale rock slope which has complex formations and geological structures, generally, insufficiency of geotechnical investigations and laboratory tests are the main factors of slope failures doling construction. In such case, remedial measures to stabilize slope should be selected and applied through reliable investigations and analysis considering the geotechnical characteristics. The rock slope of this study, one of the largest cut slopes in Korea with a length of 520.0 m and maximum height of 122.0 m consists of metasedimentary rocks. And a case study on the causes of large-scale rock slope failure was carried out by analysis of landslides history and site investigations during construction. When the slope with the original design slope of 0.7: 1.0 (H:V) was partially constructed, the slope failure was occurred due to the factors such as poor conditions of rocks (weathered zone, coaly shale and fault shear zone), various discontinuities (joints, foliations and faults), severe rain storm and so on. The types of failures were rockfall, circular failure, wedge failure and the combination of these types. So, the design of slope was changed three times to ensure long-term slope stability. This paper is intended to be a useful reference for analyzing and estimating the stability of rock slopes whose site conditions are similar to those of this study site such as geological structures and geotechnical properties.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1080-1087
• /
• 2004

A trial with twenty-four newly weaned Awassi lambs (initial body weight=21.5$\pm$0.8 kg) was conducted using a 3$\times$2 factorial design to study the effect of feeding three sources of protein supplements (soybean meal (SBM), sunflower seed meal (SSM), and cottonseed meal (CSM)), either untreated or formaldehyde-treated on the growth performance and carcass traits of Awassi lambs. Lambs were randomly assigned to one of the six diets (4 lambs/treatment diet) and were individually fed for a period of 107 days. Experimental diets were isonitrogenous and isocaloric. Final live weight and average daily gain (ADG) were affected by both source of protein and formaldehyde treatment (undegradable protein). Lambs fed untreated diets had better (p<0.01) daily gain compared to those fed formaldehyde-treated diets. Similarly total feed intake per animal was significantly (p<0.05) affected by protein source and formaldehyde treatment. Formaldehyde treatment caused a significant decrease (p<0.01) in feed intake compared to lambs fed untreated diets. Feed requirement per unit of gain was not affected by formaldehyde treatment during all periods of the experiment except for the second period (the second 28 day period), whereby untreated SBM, SSM and CSM had better feed conversion ratio (FCR) than the treated groups. Source of protein had a moderate effect (p<0.10) on FCR but had a significant effect (p<0.05) on hot and cold carcass weight, digestive tract empty weight and liver weight, with lambs fed SBM having higher values than lambs fed SSM and CSM diets. Supplementation with undegradable protein had a significant effect (p<0.05) on dressing-out percentage (p<0.05), final live weight, and hot and cold carcass weight (p<0.01). The lower values pertain to lambs fed treated diets compared to lambs fed untreated diets. In general, there were no significant differences among all carcass linear dimensions, carcass cut weights and dissected loin tissue weights for both treatments (protein source and formaldehyde treatment). Supplementation with undegradable protein but not the source of protein resulted in significantly higher dissected leg total bone weight (p<0.05), tibia and femur weight (p<0.05), and femur length (p<0.01) at the same carcass weight. Results suggest that the treatment of SBM, SSM and CSM with formaldehyde did not improve efficiency of feed utilization, lamb performance or carcass traits and that the SBM diet resulted in an increase in lamb performance compared to other experimental diets.

• Applied Microscopy
• /
• v.5 no.1
• /
• pp.9-19
• /
• 1975

In order to clarify the mecahnism of histological barriers to pathogens of witches' broom diseased in sweet potatoes, this experiment has been conducted to observe the relationship between pathological characters and the transfer of mycoplasmae in the shoot apex. The material used the experiment is the sweet potato (Ipomoea batatas (L.) Lamm. Suwon 147). In the experiment regarding of mycoplasmae, the upper limit zone of transfer of mycoplasmae is examined by way of the process of free stock and the shoot apex of a infected part in nature, observed in the culture of each part of the diseased plant which is cut to a certain length. The pathological change pattern of tissues infected with mycoplasmae has been observed under the light and electron microscopes. As a result of this experiment, the following conclusion was arrived at. 1. It has been ascertained that the mycoplasmae are not existent in a promeristem and primary meristem zone from the meristem dome, and is existent in the lower part of the vascular differentiation zone, after which differential tissues the mycoplasmae become progressively enlarged, and before which undifferential tissues it become progressively immatured and diminished in size. 2. It can be suggested that mycoplasmae may not be existed in the shoot meristem, be cause the passing structures such as sieve area and plasmodesma which can be pass ed immatured mycoplasmae is undifferentiated. 3. In the tissue culture, free stock can be obtained in the zone between 1.0-1.5mm of the shoot apex, while it cannot in the 2.0-3.0mm zone, because of infection by mycoplasmae. It is suggested that immature mycoplasmae may be diffused according to temperature ($28{\pm}1^{\circ}C$) in tissue culture process.

• FLOWER RESEARCH JOURNAL
• /
• v.26 no.4
• /
• pp.195-201
• /
• 2018

The plant morphological and chromosome characteristics of 'Bonanza', 'Coral Candy' and 'Purple Crystal', a formolongi-Asiatic (FA) interspecific hybrid species bred at the National Institute of Horticultural Science, Rural Development Administration (RDA), were investigated in this study. The flowering time of these species were found to have some variation. 'Bonanza' flowers in the middle to late June (medium-late maturing cultivar), 'Coral Candy' in the mid of June (medium maturing cultivar), and 'Purple Crystal' was observed to be in early June (early maturing cultivar). The flowering direction of all three cultivars are upward facing flowers and having a weak fragrance. The height of the plants was recorded in the range between 101.0 cm ('Purple Crystal') to 142.3 cm ('Bonanza'), thus they are able to develop cut flowers with excellent stem elongation. Flower diameters of 'Bonanza' (17.1 cm) and 'Coral Candy' (16.9 cm) were classified to be large sized flowers. On the other hand, 'Purple Crystal' had a narrow flower diameter (12.3 cm) with an outer petal width of more than 4.0 cm. Leaf length was observed for 'Bonanza' (15.7 cm), 'Coral Candy' (19.7 cm), and 'Purple Crystal' (11.1 cm). Chromosome analysis was done using FISH technique. Results revealed that all three cultivars were observed as triploids (2n=3x=36). FISH analysis also showed 5S/45S rDNA of 'Bonanza', 'Coral Candy' and 'Purple Crystal' as 4/11 loci, 4/12 loci, and 4/11 loci, respectively. The results of the FISH analysis are useful as markers to distinguish cultivars, since the patterns of rDNA observed on the remaining chromosomes are significantly different except FISH patterns of chromosome #3.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.105-118
• /
• 2008

Shotcrete is one of the main support materials in tunnelling. Its bonding state on excavated rock surfaces controls the safety of the tunnel: De-bonding of shotcrete from an excavated surface decreases the safety of the tunnel. Meanwhile, the bonding state of shotcrete is affected by blasting during excavation at tunnel face as well as bench cut. Generally, the bonding state of shotcrete can be classified as void, de-bonded, or fully bonded. In this study, the state of the back-surface of shotcrete is investigated using impact-echo (IE) techniques. Numerical simulation of IE technique is performed with ABAQUS. Signals obtained from the IE simulations were analyzed at time, frequency, and time-frequency domains, respectively. Using an integrated active signal processing technique coupled with a Short-Time Fourier Transform (STFT) analysis, the bonding state of the shotcrete can be evaluated accurately. As the bonding state worsens, the amplitude of the first peak past the maximum amplitude in the time domain waveform and the maximum energy of the autospectral density are increasing. The resonance frequency becomes detectable and calculable and the contour in time-frequency domain has a long tail parallel to the time axis. Signal characteristics with respect to ground condition were obtained in case of fully bonded condition. As the ground condition worsens, the length of a long tail parallel to the time axis is lengthened and the contour is located in low frequency range under 10 kHz.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.38-46
• /
• 1999

o.25${\mu}m$ T-shaped gate P-HEMT is fabricated and used for design of X0band three stage monolithic microwave integrated circuit(MMIC) low noise amplifier(LNA). The fabricated P-HEMT exhibits an extrinsis transconductance of 400mS/mm and a drain current of 400mA/mm. The RF and noise characteristics show that the current gain cut off frequency is 65GHz and minimum noise figure(NFmin) of 0.7dB with an associated gain of 14.8dB at 9GHz. In the design of the three stage LNA, we have used the inductive series feedback circuit topology with the short stub. The effects of series feedback to the noise figure, the gain, and the stability have been investigated to find the optimal short stub length. The designed three staage LNA showed a gain of above 33dB, a noise figure of under 1.2dB, and ainput/output return loss of under 15dB and 14dB, respectively. The results show that the fabricated P-HEMT is very suitable for a X-band LNA with high gain.

• Journal of Life Science
• /
• v.6 no.1
• /
• pp.40-47
• /
• 1996

Experiments were conducted to determine the effects of plant growth regulators on in vitro flowering and micropropagation of Gentiana scabra Bunge which had been used the cut flower, pot flower ornamental and medicinal plants. Flower bud formation was affected by GA$_{3}$ and kinetin. The optimum concentrations for flower bud formation was observed at 0.5 mg/l kinetin and GA$_{3}$ , while kinetin was favorable. More flowerings result from the interaction of GA$_{3}$ and kinetin at in a combination of 0.1 mg/l kinetin + o.1 mg/l GA$_{3}$, but the optimum concentration of GA$_{3}$ and kinetin was decreased. All concentrations of kinetin with 0.1 mg/l GA$_{3}$ or O mg/l GA$_{3}$ + 0.5 mg/l kientin reduced t (weeks needed for 50% plantlets). The plantlet growth was affected by GA$_{3}$ and kinetin during plantlet culture. More lateral shots and better shoot length per plantlet were obtained as GA$_{3}$ and kinetin concentration were increased up to 1.0 mg/l. The number of per plantlet was greater increased in MS medium containing GA$_{3}$ than kinetin. Interaction was exhibited at lower concentration with 0.5mg/l GA$_{3}$ and kinetin, but not in higher concentration with 1.0 mg/l GA$_{3}$ and kinetin. Higher pod diameter increased seed germination, while lower pod diameter was obtained from abnormal plantlet. MA medium containing 0.5 mg/l GA$_{3}$ significantly increased germination without regard to pod diameter.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.2
• /
• pp.198-206
• /
• 1981

A field research was conducted to evaluate the effects of inoculation of Rhizobium meliloti and lime application on the early growth of alfalfa, var. Luna, in an acid soil. Alfalfa seeds were inoculated by lime-peat pelleting method with $A_3$ strain isolated from alfalfa roots. Both inoculated and noninoculated seeds were sown in acid soil (pH 5.5) with three levels of lime application (1, 3, 6 ton/ha) on mid-April. Inoculated seeds produced many effective nodules in early stage and increased nitrogen and chlorophyll contents of leaf, consequently stimulating alfalfa growth. Pseudo nodules were found in noninoculated, while they were seldom formed in inoculated. Lime application increased soil pH, plant height, root length, and shoot and root weight. Liming effect on nodulation was significant at first cut, but no longer after then. Both inoculation and liming increased the forage yield of alfalfa. Inoculation and liming of 6 ton/ha together produced the highest yield. As compared to control plot of nitrogen application, the effect of seed inoculation only could be equal to about 120 kg/ha nitrogen application. The total nitrogen contents of forage were little affected by number or weight of nodules and amounts of lime application.

• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.204-212
• /
• 2017

Soil disturbance caused by timber harvesting is widely recognized as a potential threat to forest utilization. The degree and extent of soil disturbance is believed to vary with respect to harvesting methods and logging machines. This study has conducted to assess the degree of soil disturbance associated with ground-based cut-to-length (GC) and cable yarding with whole tree (CW) harvesting methods. Soil disturbance was classified using a visual assessment of harvest unit. The properties of soils in different disturbance levels were also evaluated to understand the influence of timber harvesting on soil structure with soil core sampling method. The deep disturbance and soil compaction were observed in sites by 48% and 23% through harvesting areas for GC and CW logging methods, respectively. The results showed that logging machine and number of machine passage had significant influences on soil bulk density and porosity. Soil disturbance types such as rutted, slash cover, and compact were influenced by equipment travel trends in a GC method.