• 수산해양기술연구
• /
• 제25권2호
• /
• pp.87-104
• /
• 1989

Recently, with the tendency of more lightening, high-strength and high-speed in the marine industries such as marine structures, ships and chemical plants, the use of the aluminium Alloy is rapidly enlarge and there occurs much interest in the study of corrosion fatigue crack characteristics. In this paper, the initiation of surface crack and the propagation characteristics on the base metal and weld zone of 5086-H116 Aluminium Alloy Plate which is one of the Al-Mg serious alloy(A5000serious) used most when building the special vessels, were investigated by the plane bending corrosion fatigue under the environments of marine, air and applying cathodic protection. The effects of various specific resistances on the initiation, propagation behavior of corrosion fatigue crack and corrosion fatigue life in the base metal and heat affected zone were examined and its corrosion sensitivity was quantitatively obtained. The effects of corrosion on the crack depth in relation to the uniform surface crack length were also investigated. Also, the structural, mechanical and electro-chemical characteristics of the metal at the weld zone were inspected to verify the reasons of crack propagation behavior in the corrosion fatigue fracture. In addition, the effect of cathodic protection in the fracture surface of weld zone was examined fractographically by Scanning Electron Microscope(S.E.M.). The main results obtained are as follows; (1) The initial corrosion fatigue crack sensitibity under specific resistance of 25Ω.cm% show 2.22 in the base metal and 19.6 in the HEZ, and the sensitivity decreases as specific resistance increases (2) By removing reinforcement of weldment, the initiation and propagation of corrosion crack in the HAZ are delayed, and corrosion fatigue life increases. (3) As specific resistance decreases, the sensitivity difference of corrosion fatigue life in the base metal and HAZ is more susceptible than that of intial corrosion fatigue crack. (4) Experimental constant, m(Paris' rule) in the marine environment is in the range of about 3.69 to 4.26, and as specific resistance increases, thje magnitude of experimental constant, also increases and the effect by corrosion decreases. (5) Comparing surface crack length with crack depth, the crack depth toward the thickness of specimen in air is more deeply propagated than that in corrosion environment. (6) The propagation particulars of corrosion fatigue crack for HAZ under initial stress intensity factor range of $\Delta$k sub(li) =27.2kgf.mm super(-3/2) and stress ratio of R=0 shows the retardative phenomenon of crack propagation by the plastic deformation at crack tip. (7) Number of stress cycles to corrosion fatigue crack initiation of the base metal and the welding heat affected zone are delayed by the cathodic protection under the natural sea water. The cathodic protection effect for corrosion fatigue crack initiation is eminent when the protection potential is -1100 mV(SCE). (8) When the protection potential E=-1100 mV(SCE), the corrosion fatigue crack propagation of welding heat affected zone is more rapid than that of the case without protection, because of the microfissure caused by welding heat cycle.

• 복식
• /
• 제59권8호
• /
• pp.49-65
• /
• 2009

As basic materials in this research, 874 pieces of engraving that recorded the garment produced by diverse authors in the 17-18th century were collected among the collections of male and female garment in the engraving kept by National Library of France and 216 pieces of engraving were classified among them to observe justaucorps as stated in the materials. Since type of justaucorps in the 18th century can be classified by difference in shape and change through the above engraving materials in large quantity and the shape and composition can be compared and analyzed with other materials such as picture, stored garment, written materials without difficulty, the chronology can be composed by single type of justaucorps. Intending to understand the change in composition caused by type classification and pattern making as per analysis of type property of justaucorps, the men's upper garment in France in the 18th century. Checking change in design per from and materials, justaucorps of 1680-1700s was in silhouette where waist in the length above knee was adhered and slightly spread to lower part. In the type of 1710-1750s, waist adhered remarkably and many pleats were made under waist to produce volume of form that spread to lower part like skirt. In the type of 1760-1780s, straight silhouette was attached to whole body and end of front adjustment in slant line turns to rear part. The developmental aspect of construction can be checked by making pattern. Changing the cutting line of body plate to smoothly connect section and to try to adhere to the body, the development of simpler and delicate pattern production technique was confirmed.

• 한국전문물리치료학회지
• /
• 제20권1호
• /
• pp.18-27
• /
• 2013

The purpose of this study was to compare the ring lock type knee-ankle-foot orthosis (KAFO) with newly developed 4-bar linkage KAFO on the gait characteristics of persons with poliomyelitis clinically. This 4-bar linkage is the stance control type KAFO which provide the stability during stance phase and knee flexion during swing phase. Two subjects participated in this study voluntarily. We provided the customized 4-bar linkage KAFO then asked the subjects to walk in level surface and stairs under the two different KAFO conditions. The characteristics of gait in the persons with poliomyelitis were evaluated using a 3D motion analysis system and force plate. Additionally 6 minute walk test for physiological cost index were conducted using pulse oximeter to measure the energy consumption. In the results of this study, the differences of 4-bar linkage KAFO compared with ring lock type KAFO are as follows: (1) Walking speed, stride length, and step length on level increased in subjects, (2) The gait symmetry was improved by generated knee flexion and decreased pelvic external rotation on level and stairs walking, (3) Decreased vertical excursion of center of mass and pelvic elevation during swing phase was decreased on level, (4) Knee extension moment, hip flexion moment, hip and knee internal rotation moment of non-braced limb were decreased on level walking, (5) Walking speed in 6-minute walk test was increased and physiological cost index was decreased. These findings indicate that 4-bar linkage KAFO compared with ring lock type KAFO is effective in enhancing pattern, endurance, and energy consumption in level surface and stairs walking.

• The Journal of Korean Physical Therapy
• /
• 제13권2호
• /
• pp.433-444
• /
• 2001

This review highlights the ontogenesis and the differentiation of motor neuron in spinal cord, and introduce the survival motor neuron(SMN) which is associated with growth and survival of motor neurons. The differentiation of floor plate cells and motor neurons in the vertebrate neural tube appears to be induced by signals from the notochord. This signal is Sonic hedgehog(Shh). The early development of motor neurons involves the inductive action of Shh. The SMN gene is essential for embryonic viability. SMN mRNA is also expressed in virtually all cell types in spinal cord, including large motor neurons. The SMN protein is involved in RNA processing and during early embryonic development is necessary fer cell survival. Two SMN genes are present in 5q 13 in humans: the telomeric gene(SMNt), which is the SMA-determining gene, and the centromeric analog gene(SMNc). The majority of transcripts from the SMNt gene are full length but, major transcripts of the SMNc gene have a high degrees of alternative splicing and tend to have little or no exon 7. The SMN is involved in the RNA processing(the biogenesis of snRNPs and pre-mRNA splicing), the anti-apoptotic effects, and regulating gene expression.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1327-1336
• /
• 2013

본 논문은 파형 복부판이 수평 곡선 I형 거더의 극한 거동에 미치는 영향을 다룬다. 파형 복부판은 기하학적 특성에 따라 플레이트 거더의 비틂 및 뒴 강성 증진을 위해 적용이 가능하다. 그동안 파형 복부판이 일반 직선 거더의 극한 거동에 미치는 영향을 다룬 많은 연구들이 있었으나, 면외 방향 거동이 주요하게 나타나는 곡선 거더의 극한 거동에 미치는 영향에 대한 연구는 거의 이루어지지 않았다. 이 연구에서는 비탄성-비선형 해석을 통해 파형 복부판 수평 곡선 I형 거더의 극한 거동을 다룬다. 본 해석 연구에서는 파형 복부판을 갖는 곡선 거더의 극한 거동에 영향을 미칠 수 있는 기하학적 인자로써, 곡선 거더의 횡방향 비지지 길이와 사잇각, 복부판의 파고 및 파장이 주요 매개변수로 고려되었다. 본 해석 연구를 통해, 각 매개변수 변화에 따른 극한 거동 및 내하력 변화를 분석하고, 일반 판형 복부판이 적용된 거더의 내하력과 비교하여 파형 복부판이 내하력 증진에 미치는 영향을 도출하였다. 본 해석 결과에 따르면, 높은 비틂 및 뒴 강성에 의해 파형 복부판은 곡선 거더의 내하력 증진에 효과적인 것으로 나타났다. 그러나 곡선 거더의 곡률 또는 사잇각이 작은 경우, 파형 판의 아코디언 효과에 의해 오히려 내하력이 감소될 수 있다는 것 또한 나타났다.

• Steel and Composite Structures
• /
• 제33권6호
• /
• pp.823-836
• /
• 2019

Spiral welded tubes (SWTs) are fabricated by helically bending a steel plate and welding the resulting abutting edges. The cost-effectiveness of concrete-filled steel tube (CFST) columns can be enhanced by utilising such SWTs rather than the more conventional longitudinal seam welded tubes. Even though the steel-concrete interface bond strength of such concrete-filled spiral-welded steel tubes (CF-SWSTs) is an important consideration in relation to ensuring composite behaviour of such elements, especially at connections, it has not been investigated in detail to date. CF-SWSTs warrant separate consideration of their bond behaviour to CFSTs of other tube types due to the distinct weld seam geometry and fabrication induced surface imperfection patterns of SWTs. To address this research gap, axial push-out tests on forty CF-SWSTs were carried out where the effects of tube material, outside diameter (D), outside diameter to wall thickness (D/t), length of the steel-concrete interface (L) and concrete strength grade (f'_c) were investigated. D, D/t and L/D values in the range 102-305 mm, 51-152.5 and 1.8-5.9 were considered while two nominal concrete grades, 20 MPa and 50 MPa, were used for the tests. The test results showed that the push-out bond strengths of CF-SWSTs of both mild-steel and stainless-steel were either similar to or greater than those of comparable CFSTs of other tube types. The bond strengths obtained experimentally for the tested CF-SWSTs, irrespective of the tube material type, were found to be well predicted by the guidelines contained in AISC-360.

• 대한수의학회지
• /
• 제40권4호
• /
• pp.665-670
• /
• 2000

The present study was undertaken to investigate the morphological characteristics of the suprachiasmatic nucleus (SCN) of the Korean native goat by cresyl violet stain. The SCN was located ventrolateral to the third ventricle and dorsal to the optic chiasm. This nucleus was showed carrot form in longitudinal section. Its size was 1.8 mm in length, 0.9 mm in maximum height and 1.6 mm in maximum width. In coronal sections, the SCN shaped very thin plate in rostral part, but it was changed to sweet-potato form in middle part, and ornamental jade form in caudal part. The size of SCN was larger in caudal part than in rostral part. The size of the neuron of SCN was about $10{\mu}m$ in diameter with round or oval shape. The boundary of SCN was not firmly defined in caudal part because the neurons were dispersed into the hypothalamic region. It is concluded that the SCN of the Korean native goat has a morphological characteristics.

• 한국지반신소재학회논문집
• /
• 제3권1호
• /
• pp.3-15
• /
• 2004

1990년대 후반부터는 시공의 간편성과 유연한 벽면 형상이 가능한 블럭식 보강토 옹벽의 시공사례가 급격히 증가하고 있는 추세이다. 그러나, 기존의 연구자료와 비교해 볼 때 블럭의 형태, 보강재, 보강재와 블록의 연결형태, 뒤채움재에 따라 상이한 거동을 할 개연성이 있다. 따라서, 이 연구는 블럭식 보강토 옹벽의 거동을 수평 수직 토압계, 경사계, 침하판, 스트레인 게이지, 변형핀 등의 계측기를 설치하여 시공중과 시공후의 보강토 옹벽의 거동을 평가하였다. 또한, 현장에 적용된 보강토 옹벽의 설계 프로그램인 SRWall에 의해 산정된 안전율과 이론에 의해 도출된 안전율을 상호 비교함으로써 현장 계측결과와 설계프로그램에 의한 안전성을 검증하였다. 9개월 동안의 현장계측을 통한 연구 결과를 종합해보면, 블럭식 보강토 옹벽은 양호한 다짐관리와 시공기간의 장기화로 인한 변위는 매우 미미한 것으로 판명되었다. SRWall을 활용하여 도출한 안전율과 보강토 옹벽의 안전율을 평가한 결과 이론에 의해 도출한 안전율과 유사한 것으로 판명되었다.

• 대한치과교정학회지
• /
• 제51권4호
• /
• pp.231-240
• /
• 2021

Objective: This outcome analysis study evaluated the actual positions of the orthodontic miniplate and miniplate anchoring screws (MPASs) and the risk factors affecting adjacent anatomic structures after miniplate placement in the mandibular incisal area. Methods: Cone-beam computed tomographic images of 97 orthodontic miniplates and their 194 MPASs (diameter, 1.5 mm; length, 4 mm) in patients whose miniplates provided sufficient clinical stability for orthodontic treatment were retrospectively reviewed. For evaluating the actual positions of the miniplates and analyzing the risk factors, including the effects on adjacent roots, MPAS placement height (PH), placement depth (PD), plate angle (PA), mental fossa angle (MA), and root proximity were assessed using the paired t-test, analysis of variance, and generalized linear model and regression analyses. Results: The mean PDs of MPASs at positions 1 (P1) and 2 (P2) were 2.01 mm and 2.23 mm, respectively. PA was significantly higher in the Class III malocclusion group than in the other groups. PH was positively correlated with MA and PD at P1. Of the 97 MPASs at P1, 49 were in the no-root area and 48 in the dentulous area; moreover, 19 showed a degree of root contact (19.6%) without root perforation. All MPASs at P2 were in the no-root area. Conclusions: Positioning the miniplate head approximately 1 mm lower than the mucogingival junction is highly likely to provide sufficient PH for the P1-MPASs to be placed in the no-root area.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2305-2308
• /
• 2012

Perovskite structured barium titanate particles ($BaTiO_3$) platelets were synthesized by molten salt synthesis and topochemical microcrystal conversion. As the precursors of $BaTiO_3$, plate-like $BaBi_4Ti_4O_{15}$ particles were first synthesized by the reaction of $Bi_4Ti_3O_{12}$, $BaCO_3$, and $TiO_2$ at $1080^{\circ}C$ for 3 h in $BaCl_2$-KCl molten salt. After the topochemical reactions, layer-structured $BaBi_4Ti_4O_{15}$ particles transformed to the perovskite $BaTiO_3$ platelets. $BaTiO_3$ particles with thickness of approximately $0.5{\mu}m$ and a length of $10-15{\mu}m$ retained the morphology feature of the $BaBi_4Ti_4O_{15}$ precursor. For <001> $Pb(Mg_{1/3}Nb_{2/3})O_3-32.5PbTiO_3$ (PMNT)-5 wt % PbO piezoelectric ceramics textured with 5 vol % of $BaTiO_3$ templates, the Lotgering factor reached 0.82, and $d_{33}$ was 870 pC/N.