• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.14-18
• /
• 2006

Optical interferometer is used for various optical measurement fields in optical metrology and biomedical measurements. In an optical interferometer, optical delay line has to change the optical path length of a reference arm to match with that of a sample in and it's speed was limited by reference arm movement speed. In this paper, we proposed an all-fibered RSODRapid Scanning-speed Optical Delay) without any mechanical movement, and we applied this system to optical interferometer. Experimental setup is consist of pulse laser source (center wavelength 1304nm, pulse width 30ps, repetition rate 10GHz), two phase modulators and dispersive shifted fiber. As experimental results, we obtain the maximum time delay of 11ps at 10MHz repetition rate, and it is easily tuneable the time delay by modulation frequency and modulation voltage.

• Journal of Korea Foundry Society
• /
• v.34 no.2
• /
• pp.54-59
• /
• 2014

In this study, the extruded Al-6.3Zn-2.4Mg alloys were selected among the 7000 series aluminum alloys sensitive to hydrogen environment in order to examine the effects of both the aging conditions and the length of hydrogen charging period on the mechanical properties of the alloy. The specimens were aged for 24hours at $100^{\circ}C$ (under aging (UA)), $120^{\circ}C$ (peak aging (PA)), and $160^{\circ}C$ (over aging (OA)), respectively. Charging tests were performed at RT for 12, 24, 36 hours under potentiostatic conditions (-2000 mV vs (Ag/AgCl)) for 12, 24 and 36 hours in 1M $H_2SO_4$ and 0.1%$NH_4SCN$ solution. The fracture surface was examined by scanning electron microscopy (SEM). X-ray diffraction (XRD) pattern in peak aged sample was obtained before and after hydrogen charging from extruded Al-6.3Zn-2.4Mg alloys. The decreasing rate of tensile strength and elongation is represented in order of over aging < under aging < peak aging, and it is believed that the hydrogen recharge is more sensitive to elongation than tensile strength. The formation of $AlH_3$ in hydrogen charged Al-6.3Zn-2.4Mg alloys has been confirmed by X-ray diffraction studies.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.861-867
• /
• 2015

The Compact Tension (CT) type test was performed in order to evaluate the fracture toughness performance of glass fiber-reinforced laminated timber. Glass fiber textile and sheet Glass fiber reinforced plastic were used as reinforcement. The reinforced laminated timber was formed by inserting and laminating the reinforcement between laminated woods. Compact tension samples are produced under ASTM D5045. The sample length was determined by taking account of the end distance of 7D, and bolt holes (12 mm, 16 mm, 20 mm) had been made at the end of artificial notches in advance. The fracture toughness load of sheet fiberglass reinforced plastic reinforced laminated timber was increased 33 % in comparison to unreinforced laminated timber while the glass fiber textile reinforced laminated timber was increased 152 %. According to Double Cantilever Beam theory, the stress intensity factor was 1.08~1.38 for sheet glass fiber reinforced plastic reinforced laminated timber and 1.38~1.86 for glass fiber textile reinforced laminated timber, respectively. That was because, for the glass fiber textile reinforced laminated timber, the fiber array direction of glass fiber and laminated wood orthogonal to each other suppressed the split propagation in the wood.

• Journal of Korean Academy of Nursing
• /
• v.42 no.4
• /
• pp.517-524
• /
• 2012

Purpose: To compare and confirm the impact of prepregnancy body mass index on pregnancy outcome in women with a singleton conceived by assisted reproductive technology and spontaneously conceived pregnancy. Methods: A sample of 165 and 247 pregnant women with and without assisted reproductive technology were retrospectively recruited from electronic medical charts of C hospital. Results: There were significant differences between the two groups for maternal age, paternal age, length of marriage, prepregnancy body mass index, parity, spontaneous abortion experience, and preterm delivery. A prepregnancy body mass index of ${\geq}25$ was associated with higher risk for maternal and neonatal complication in the assisted reproductive technology group. Conclusion: The results indicate that a higher prepregnancy body mass index is associated with increased risks for adverse pregnancy outcomes for women using assisted reproductive technology. So these women need appropriate care to compensate for the risk.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.4
• /
• pp.198-203
• /
• 2013

Copolymer consisted of MMA and tBMA was synthesized by radical polymerization and poly(MMA-co-MA) was prepared by selective hydrolysis of tert-butyl group. The obtained polymer was coupled with epoxy functionalized PEO of various molecular weight to synthesize poly(MMA-co-PEGMA) with different side chain length. The AC-impedance measurement shows $1.88{\times}10^{-6}Scm^{-1}$ of room temperature ionic conductivity from 48mol% of MMA while $5.11{\times}10^{-8}Scm^{-1}$ was observed in 82mol% sample. In addition, there was an effect of PEGMA molecular weight on ionic conductivity possibly due to the steric hindrance in grafting-onto coupling reaction. Finally, the polymer electrolytes shows electrochemical stability up to 6V at room temperature.

• Safety and Health at Work
• /
• v.11 no.1
• /
• pp.19-25
• /
• 2020

Background: Childbirth represents a significant transition for women, with physical and psychological sequelae. Reentry to the workplace during the postpartum period is understudied, with implications for maternal well-being and job-related outcomes. This study's aim was to examine selected pregnancy, childbirth, and return-to-work correlates of overall self-rated health within the first month of work reentry after maternity leave. Methods: Between December 2016 and January 2017, we surveyed women employed at a large, public Midwestern university who had given birth in the past five years (N = 249) to examine self-rated overall health in the first month of work reentry. Using ordinal logistic regression, we examined whether physical or psychological health problems during pregnancy, childbirth complications, length of maternity leave, and depression and anxiety at work reentry were related to overall health. Results: Women who experienced depression (odds ratio [OR] = 0.096 [95% confidence interval {CI} = 0.019 to 0.483, p = 0.004]) and anxiety (OR = 0.164, [95% CI = 0.042 to 0.635, p = 0.009]) nearly every day reported worse health at work reentry than those with no symptoms. Controlling for demographics and mental health, women who experienced medical problems during pregnancy (OR = 0.540 [95% CI = 0.311 to .935, p = 0.028]) were more likely to report poor health, while taking a longer maternity leave (OR = 14.552 [95% CI = 4.934 to 42.918, p < 0.001]) was associated with reporting better health at work reentry. Conclusion: Women who experience medical complications during pregnancy, return to the workplace too soon after birth, and experience mental health symptoms are vulnerable physically as they return to work.

• The Plant Pathology Journal
• /
• v.18 no.6
• /
• pp.323-327
• /
• 2002

A rod-shaped virus was isolated from pepper showing mild mosic during the winter growing seasons of 2001 and 2002 in Korea. Based on its biological reactions, serological relationships, reverse transcription-poly-merase chain reaction (RT-PCR) using specific primers, and nucleotide sequence analysis of coat protein (CP) gene, the isolated virus was identified as Tobacco mild green mosaic virus (TMGMV) and designated as Korean pepper isolate (TMGMV-KP). Crude sap from infected tissue was mechanically transmitted to various indicator plants, which produced characteristic symptoms of tobamovirus infection. However, no symptom was observed in Gomphorena globosa. In RT-PCR assays with specific primers toy respective detection of TMGMV, Tobacco mosaic virus (TMV), Pepper mild mottle virue (PMMoV), and Tomato mosaic virus (ToMV), a single strong band of about 500 bp in length was produced from the sample used only with TMGMV primers. The amplified DNA was cloned and the nucleotide sequence was determined. Sequence comparisons with the CP gene of other tobamoviruses indicated that TMGMV-KP shared 99.3％ identity with TMGMV Japanese isolate and only 59.1, 58.6, and 58.1％ identity with TMV, PMMoV and ToMV, respectively. This is the first report of TMGMV in Korea.

• International Journal of Highway Engineering
• /
• v.2 no.2
• /
• pp.139-148
• /
• 2000

Currently existing Accelerated Pavement Testing (APT) systems developed in several countries have been employed mainly to test the performance of asphalt pavement. Meanwhile, the length of concrete pavement is similar to that of asphalt pavement in expressways of Korea. and is expected to increase due to its durability and compatibility to our weather condition. To meet the society's demand of having our own APT system which can examine the long-term performance of concrete pavement, a contract study to develop Korea Accelerated Loading and Environment Simulator (KALES) for concrete pavement has been performed for 3 years from 1997 through 1999. Through the project, a detailed design was Peformed for the KALES system in which the entire structure of KALES, loading mechanism, wandering mechanism, suspension system, driving system were proposed. Also in advance to design a full-scale KALES system, a sample scale model was manufactured and tested for operating motion and force distribution. It is evident that the proposed prototype KALES system will provide higher degree of traffic simulation and durable operation, based on the satisfactory fatigue analysis.

• Water for future
• /
• v.8 no.1
• /
• pp.61-79
• /
• 1975

An attempt is made to develope a scheme for synthesizing unit hydrograph for any arbitrary small watershed in the Han or Geum River basin, which can be applied in determining various sizes of design flood for flood control prijects. Stage gauging stations, seven in the Han and five in the Geun River basin with rating curves, were selected as subbasins for the analysis. Unit hydrographs of 2-hour duration were derived for several heavy storm events using the storm and the corresponding flood runoff data for each subbasin. The Clark method programmed by the Hydrologic Engineering Center, U.S. Corps of Engineers, was utilized for derivation of instantaneous unit hydrographs which were, in turn, converted into 2-hour unit hydrograph. By averaging the 2-hour unit hydrographs from several storm events a representative 2-hour unit hydrograph was determined for each subbasin and hence a separate derivation of dimensionless unit hedrograph was also possible for the Han and Geum River basins. The physiographic characteristics such as stream length, distance to the centroid of each watershed were correlated with the characteristic parameters of the derived unit hydrograph for the subbasins within two large basins. correlation analyses between the characteristic parameters were also made. These correlation analyses resulted a series of four equations and a dimensionless unit hydrograph for the two large basins, which made it possible to draw a synthetic 2-hour unitgraph for any small watershed within the Han or Geum River basin. A detailed procedure for aplying the derived method for an arbitrary basin is summarized with one sample computation for each of the two basins. A comparison of the actually derived 2-hour unit hydrogrograph and the synthesized one showed a fair agreement. A recommendation is made for the further study.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.215-216
• /
• 2013

The silicide is a compound of Si with an electropositive component. Silicides are commonly used in silicon-based microelectronics to reduce resistivity of gate and local interconnect metallization. The popular silicide candidates, CoSi2 and TiSi2, have some limitations. TiSi2 showed line width dependent sheet resistance and has difficulty in transformation of the C49 phase to the low resistive C54. CoSi2 consumes more Si than TiSi2. Nickel silicide is a promising material to substitute for those silicide materials providing several advantages; low resistivity, lower Si consumption and lower formation temperature. Nickel silicide (NiSi) nanowire (NW) has features of a geometrically tiny size in terms of diameter and significantly long directional length, with an excellent electrical conductivity. According to these advantages, NiSi NWs have been applied to various nanoscale applications, such as interconnects [1,2], field emitters [3], and functional microscopy tips [4]. Beside its tiny geometric feature, NW can provide a large surface area at a fixed volume. This makes the material viable for photovoltaic architecture, allowing it to be used to enhance the light-active region [5]. Additionally, a recent report has suggested that an effective antireflection coating-layer can be made with by NiSi NW arrays [6]. A unique growth mechanism of nickel silicide (NiSi) nanowires (NWs) was thermodynamically investigated. The reaction between Ni and Si primarily determines NiSi phases according to the deposition condition. Optimum growth conditions were found at $375^{\circ}C$ leading long and high-density NiSi NWs. The ignition of NiSi NWs is determined by the grain size due to the nucleation limited silicide reaction. A successive Ni diffusion through a silicide layer was traced from a NW grown sample. Otherwise Ni-rich or Si-rich phase induces a film type growth. This work demonstrates specific existence of NiSi NW growth [7].