• Proceedings of the Safety Management and Science Conference
• /
• 2007.11a
• /
• pp.263-268
• /
• 2007

The main objective of this study is to provide numerical guideline for size establishment of safety shoes about adult men(over 20 years) compared to physical standards of nation (report published in 1997). The sample for this work was chosen from data which were collected and measured by Size Korea during two years (2003${\sim}$2004). In order to analyze and compare features of men's foot, analysis was performed about 1,685 subjects on 2 parts such as foot length and foot circumference. For the specific comparison on foot size, Mollison's comparison graph was used. The result of this study can be applied in manufacturing and design of shoes and socks. Also, it will enable us to have fruitful information on considerable items during manufacturing and design of safety shoes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.7
• /
• pp.929-937
• /
• 2003

In general, the electric motor for driving the centrifuge of Decanter type is selected based on the power(starting power) necessary to start the bowl and the screw shaft. However the operation cost of the machine is dependent on the power needed at a steadily operating condition, including the power against the bearing friction and that for the sludge removal. In this paper, the formulation for the sludge-removal power is presented. Sample calculation for a specific design shows that the sludge-removal power is increased with the friction coefficient. It also reveals that the power is mainly dependent on the length of the screw blade rather than the beach angle. Further it is shown that the power increases in square of the rotational speed of the machine.

• Microbiology and Biotechnology Letters
• /
• v.23 no.4
• /
• pp.485-491
• /
• 1995

Protein ion exchange chromatography was studied experimentally in order to prove the theoretical prediction from the linear model of Yamamoto, S. et al (1). Adsorption isotherms were measured as a function of ionic strength in a batch experiment. The relationship between the characteristics of chromatogram and the operating conditions of ionic strength, flow rate, length of column, concentration and amount of protein sample were studied. At the higher ionic strength, the lower flow rate and the longer column conditions, the higher number of plate was obtained. Satisfactory agreement was observed between the experimental and the calculated chromatograms except for the case of high protein concentration.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.5
• /
• pp.181-191
• /
• 2006

The main objective of this study is to analyze characteristics on the somatotype of modern adult women In order to standardize of products. The sample for this work chosen from data which were collected and measured by Size Korea during two years($2003{\sim}2004$). In order to analyze feature of the somatotype of modern adult women, analysis was peformed in 1,371 subjects(645 twenties women, 725 thirties women) about 21 body parts such as height(4 parts), width(3 parts), thickness(3 parts), circumference(7 parts), length(3 parts) and body weight. According to the result of analysis, it was found that the twenties group was near in slender somatotype, whereas the thirties group was near in fat somatotype compared to standard somatotype.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.59-69
• /
• 2007

The main objective of this study is to suggest the new sizing system proper to the boys in the high school students by classifying their somatotype for the development of educational environment and uniform. The sample for this work was chosen from data which were collected and measured by Size Korea during two years $(2003\sim2004)$. In order to analyze feature of the somatotype of boys in the high school students, analysis was performed about 479 subjects on 37 body parts such as height (9 parts), width (5 parts), thickness (6 parts), circumference (7 parts), length (8 parts), body weight and $R\ddot{o}hrer$ Index. The result of this study can be utilized in various fields such as design of classroom, student uniforms, facilities and equipments for education at high school and university, etc.

• Journal of Climate Change Research
• /
• v.6 no.2
• /
• pp.143-158
• /
• 2015

This study developed the emission intensity estimation method of GHGs by considering the characteristics of the models and time series. The telematics device was installed on the vehicle (OBD-II) to collect information on the operation conditions from each sample vehicle of public authorities. As a result of comparing the mileage distance and fuel consumption, the matching degree is analyzed very high, showed a ${\pm}1{\sim}4%$ error for each vehicle. By comparing driving record diary of vehicles managed by public authorities, this study presents the method that can be used to verify driving information in order to derive the GHGs emission intensity.

• Journal of Power System Engineering
• /
• v.15 no.4
• /
• pp.25-30
• /
• 2011

This study is made to provide with a method for correcting the geometric distortion of the digital radiography image by analytical approach based upon the inverse square law and Beer's law. This study is aimed to find out and improve a mathematic model of nonlinear type. Variations in the alignment of the X-ray source, the object, and imaging plate affect digital radiography images. A model which is expressed in parameter values; e.g, angle, position, absorption coefficient, length, width and pixel account of radiography source, is developed so as to match the sample image. For the best correction of the digital image that is the most similar to the model image, a correction technique based upon tangent is developed; then applied to the digital radiography images of steel tubes. As a result, the image correction is confirmed to be made successfully.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2368-2375
• /
• 2015

To accommodate various navigational commands, a humanoid should be able to change its walking motion in real time. Using the modifiable walking pattern generation (MWPG) algorithm, a humanoid can handle dynamic walking commands by changing its walking period, step length, and direction independently. If the humanoid is given a command to perform an infeasible movement, the algorithm substitutes the infeasible command with a feasible one using binary search. The feasible navigational command is subsequently translated into the desired center-of-mass (CM) state. Every sample time CM reference is generated using a zero-moment-point (ZMP) variation scheme. Based on this algorithm, various complex walking patterns can be generated, including backward and sideways walking, without detailed consideration of the feasibility of the navigational commands. In a previous study, the effectiveness of the MWPG algorithm was verified by dynamic simulation. This paper presents experimental results obtained using the small-sized humanoid robot platform DARwIn-OP.

• Speech Sciences
• /
• v.8 no.2
• /
• pp.73-81
• /
• 2001

In this paper, we focus on the real time implementation of the single channel adaptive noise canceller(ANC) by using TMS320C30 EVM board. The implemented single channel adaptive noise canceller is based on a reference paper [1] in which it is simulated by using the recursive average magnitude difference function(AMDF) to get a properly delayed input speech on a sample basis as a reference signal and normalized least mean square(NLMS) algorithm. To certify results of the real time implementation, we measured the processing time of the ANC and enhancement ratio according to various signalto-noise ratios(SNRs). Experimental results demonstrate that the processing time of the speech signal of 32ms length with delay estimation of every 10 samples is about 26.3 ms, and almost the same performance as given in [1] is obtained with the implemented system.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.2
• /
• pp.431-438
• /
• 2014

Type I hybrid censoring scheme is the combination of the Type I and Type II censoring scheme introduced by Epstein (1954). Epstein considered a hybrid censoring sampling scheme in which the life testing experiment is terminated at a random time $T^*$ which is the time that happens rst among the following two; time of the kth unit is observed or time of the experiment length set in advance. The likelihood function of this scheme from the Rayleigh distribution cannot be solved in a explicit solution and thus we approximate the function by the Taylor series expansion. In this process, we propose four dierent methods of expansion skill.