• Nuclear Engineering and Technology
• /
• 제39권5호
• /
• pp.637-646
• /
• 2007

An UET (ultrasound excited thermography) has been used for several years for a remote non-destructive testing in the automotive and aircraft industry. It provides a thermo sonic image for a defect detection. A thermograhy is based On a propagation and a reflection of a thermal wave, which is launched from the surface into the inspected sample by an absorption of a modulated radiation. For an energy deposition to a sample, the UET uses an ultrasound excited vibration energy as an internal heat source. In this paper the applicability of the UET for a realtime defect detection is described. Measurements were performed on two kinds of pipes made from a copper and a CFRP material. In the interior of the CFRP pipe (70mm diameter), a groove (width - 6mm, depth - 2.7mm, and length - 70mm) was engraved by a milling. In the case of the copper pipe, a defect was made with a groove (width - 2mm, depth - 1mm, and length - 110 mm) by the same method. An ultrasonic vibration energy of a pulsed type is injected into the exterior side of the pipe. A hot spot, which is a small area around the defect was considerably heated up when compared to the other intact areas, was observed. A test On a damaged copper pipe produced a thermo sonic image, which was an excellent image contrast when compared to a CFRP pipe. Test on a CFRP pipe with a subsurface defect revealed a thermo sonic image at the groove position which was a relatively weak contrast.

• 한국의류학회지
• /
• 제32권11호
• /
• pp.1782-1791
• /
• 2008

The purpose of this study was to find out the hair style image about variations of hair design elements. The method of this study was quasi-experimentation. The twelve color photographs of manikins with various hair style were used as the stimulus. As measuring instrument, a likert scale composed of 35 items of five point adjectives was used. The sample consisted of 157 males and 140 females residing in the Busan area. The range of the age is from 20 to 55. The survey was conducted from August to September in 2007. The data were analyzed by factor analysis, frequency, crosstabs one-way analysis of variance, Duncan's test and t-test used SPSS Packages. The results of this study were as follows: 1. As a result of factor analysis, 8 factors - romantic, natural, elegant, simple, classic, casual, modem and mannish were found out as constructing factors of hairstyle image. 2. As a result of hair style image analysis about variations of hair-length, The short hair style was perceived in modern, mannish, casual, sophisticate, medurm-length style in classic and elegant, long hair style was perceived to be high in romantic and natural. 3. As a result of hair style image analysis about variations of hair design elements, The length of hair style was the most influential element in hair design and secondly important one was the wave of hair style. The color of hair style didn't critical effect on image of hair style.

• Journal of the Korean Wood Science and Technology
• /
• 제43권2호
• /
• pp.145-155
• /
• 2015

Fiber morphology and basic characteristics of Legi bamboos (Gigantochloa atter) growing on Yogyakarta were studied considering their age and height positions in the culms. Culms of 4, 16, and 40 months were harvested, and their total lengths were measured. The length, diameter, and wall thickness of each internode were measured. All the sample culms were divided into three different parts along the height, and their fiber dimension and physical properties were observed. The data obtained were analyzed by analysis of variance. The results showed that the culms had a diameter of 5.8 to 10.8 cm. The lowest internodes always showed the shortest length and the thickest wall. The culms had an average fiber length of 2.41 mm and Runkel ratio of 0.61. Fiber length was affected by the height, while fiber diameter, lumen diameter, and fiber wall thickness were affected significantly by the age of the culms. The culms had high green moisture content (GMC) of 157.89%, and basic density (BD) of $456.67kg.m^{-3}$, a total longitudinal shrinkage of 0.35%, and relatively low R/T shrinkage ratio. The interactions between age and height were affected GMC and BD.

• 한국지반공학회논문집
• /
• 제23권9호
• /
• pp.29-37
• /
• 2007

본 연구에서는 카올린점토에 대한 실내실험을 통하여 수축으로 인한 균열발생을 조사하고 균열 단계를 모사할 수 있는 단순모델을 제안하였다. CPS 기법을 이용하여 디지털 카메라에 의해 얻은 균열 이미지를 분석하였다. 함수비의 감소에 따라 균열의 길이와 면적은 1차 균열단계, 2차 균열단계, 수축단계 균열의 3단계로 나타났다. 균열 면적의 1차 및 2차 균열 최종 단계에서의 정규화된 함수비는 시료 두께에 상관없이 각각 0.92와 0.70에서 발생하였다. 반면 균열 길이는 1차 균열 최종 단계에서의 함수비는 시료 두께와 상관없이 0.92에서 발생하였으나, 2차 균열 최종 단계에서의 함수비는 시료 두께가 0.5, 1.0, 2.0cm로 증가함에 따라 함수비는 0.79, 0.82, 0.85로 증가하였다. 수축 균열을 모사할 수 있는 3개의 직선으로 구성된 단순모델을 제안하였다.

• 대한치과교정학회지
• /
• 제19권3호
• /
• pp.67-78
• /
• 1989

This study was designed to investigate the difference of teeth and craniofacial complex between normal occlusion and Angle's Class II, div. 1 malocclusion in Korean children. The sample was divided into 2 groups, the 66 subjects with normal occlusion and 96 subjects with Angle's Class II, div. 1 malocclusion in both sexes. The results obtained were as follows: 1. No significant differences were observed in ant. cranial base length & cranial flexure (saddle) angle) between normal occlusion & Angle's Class II, div. 1 malocclusion group, but posterior cranial base length of Class II, div. 1 malocclusion group was larger than that of normal occlusion group. 2. No significant difference was observed in the anteroposterior position of Maxilla to cranial base between two groups, but mandibular position in Class II, Div. 1 malocclusion was posterior and interior to that of normal occlusion. 3. The length of maxilla (ANS-PSN) was larger in Class II, div. 1 malocclusion than normal occlusion. The length of mandibular body (Go-Me) was nor different between Class II, div. 1 malocclusion and normal occlusion. 4. Maxillary incisor position of Class II, div. 1 malocclusion to cranial base was more protrusive than that of normal occlusion, but there was no difference in mandibular incisor position between two groups.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.47-54
• /
• 1998

Refining is one of the most important processes of fiber treatment that provides optical and physical properties of final paper products. The evaluation method of refining progress is usually freeness (CSF) or wetness (SR) test because of its rapidity and convenience. However, there are some deficiencies in using freeness or wetness test to evaluate pulp fibers accurately because its results are more influenced by fines contents than extent of fibers treatment. The objective of this study is to show the deficiency of wetness in evaluating the refining process. For this, beating is done by varying the beating load. Handsheets are made after beating until 25 and $32^{\circ}C$ SR, and then paper properties are measured. Refined fibers are analyzed by fiber length, fines contents, curl, kink, WRV, and zero-span tensile strength. The results show that longer beating time is required to reach the same wetness at lower beating load. There are differences in the average fiber length, distribution curve of fiber length, fines contents, curl, kink, WRV of long fiber fraction, drainage time, and zero-span tensile strength of rewetted sample at different beating load. At the low beating load in the same wetness, apparent density, breaking length, burst strength, and tear strength are higher, while opacity and air permeability are lower than those of the high beating load. Using Page s equation, which shows the relationship among tensile strength, intrinsic fiber strength, and interfiber bonding strength, interfiber bonding strength is calculated and analyzed to explain final paper properties. At $25^{\circ}C$ SR, interfiber bonding strength is only slightly higher at 2.5kgf beating load, while the intrinsic fiber strength is substantially higher. At $32^{\circ}C$ SR, intrinsic fiber strength is a little bit higher at 2.5kgf beating load, and interfiber bonding strength is remarkably higher than those of 5.6kgf beating load. These results can be used to explain the different properties of the final paper at selected beating loads.

• 보건행정학회지
• /
• 제20권2호
• /
• pp.17-39
• /
• 2010

This study explored the impact on the DRG(Diagnosis-Related Groups)-based prospective payment system(PPS) operated by voluntarily participation providers. We analyzed whether the provides in the DRG-based PPS and in traditional fee-for-service(FFS) systems showed different the degree of variation in length of stay(LOS), and the providers' behaviors depending on the differences according to the varied participation periods. The study sample included all data 2,061 institutions participated in DRG-PPS in 2007 and all cases 473 FFS institutions which reported fee-for-service claims were reviewed same diagnosized diseases at least 10cases claims during three months We compared the differences of the LOS among health care institutions according to their type, region, and size. For DRGs showing significant differences in LOS, multiple regression analyses were performed to find out factors associated with LOS and interaction effect participation and hospital types or participation periods. The result provide the evidence that the DRG payment system operated by volunteering health care institutions had impact on resources use, which can reduce the institutions' the length of stay. While some DRGs had no correlation between participation periods and LOS, other DRGs, DRG participation period reversely linear relationship with LOS. That is to say, the longer participation year, the less reducing the LOS. These results support the future expansion of the DRG-based PPS plan to all health care services in Korea.

• 대한가정학회지
• /
• 제26권3호
• /
• pp.135-152
• /
• 1988

The purpose of this study was to survey the improvement activities for the apartment house ; and to examine the relationship between apartment residents and their housing improvement activities in order to present some informations for the further studies and plans of apartment design and housing policy. Library and questionnaire survey methods were used in this research. the sample was taken from 102 housewives living in the apartments over 45 pyong (1602 sq. ft.), in Seoul, Data were analyzed with the SPSS using frequency, percentage, chi-square test, F-test, Duncan's multiple range test, η2, and C2. The results were as follows: 1. It was found that residents had experienced with 3.6 kinds of housing improvement activities. Living rooms, dining rooms, and kitchens in family living areas ; balconies and utility rooms in utility areas were improved for the physical convenience and quality of living. 2. This survey indicated that apartment residents evaluated thier housing condition as high, except storage spaces and outdoor noises. 3. About 80% of respondents were expected to live continuously in the current apartments because they were satisfied with the size of thier residences, However, they wanted to improve the inside of the entire apartment, especially bathrooms. 4. Variables which had a significant relationship in housing improvement activities in the past were the length of residence, the expected length of residence, and the characteristic of residence. 5. The expected length of residence, and the characteristic of residence were found to be effective variable for evaluating the current residence. 6. Finally, the expected length of residence, and the characteristic of residence were significant variables of the housing plan in the future. Housing improvement activities were prevalent recently and expected to be continued in the future. It can be said, therefore, that apartment residents have a long -term plan to live in one place rather than moving out ever two-three years.

• 생물정신의학
• /
• 제18권4호
• /
• pp.260-266
• /
• 2011

Objectives The second to fourth digit ratio (2D : 4D) is known to reflect testosterone level during intrauterine period. Testosterone is essential for masculinization of brain. Cloninger's type II alcoholism is characterized by early age at onset and largely limited to males. Compared with type I alcoholism, type II alcoholism is thought to be masculine. There is a possibility that the digit ratio of type II alcoholism is low compared with type I. We examined digit length ratio in Cloninger's type I and II alcoholism to understand the effects of intrauterine testosterone on the development of alcoholism. Methods The participants were 87 alcohol dependent patients. We divided two subtypes of patients by Irwin's symptom list, based on Cloninger's concept. We captured the images of both palms by the scanner and measured the lengths of digits by the graphic program. Then we analyzed the digit ratios by independent-sample t-test. Results The mean 2D : 4D of type I was 0.942 (right), 0.952 (left). The mean 2D : 4D of type II was 0.927 (right), 0.940 (left). In both hands, 2D : 4D of type II was significantly lower than type I. Conclusions Type II alcoholism showed masculine type of digit length ratio compared with type I. It suggests the exposure of testosterone during intrauterine period might play an important role in determining the course and feature of alcoholism.

• 한국수산과학회지
• /
• 제51권1호
• /
• pp.79-90
• /
• 2018

Fish ages are critical information in fish stock assessments because they are required for age-structure models such as virtual population analysis and stochastic catch-at-age models, whose outputs include recruitment strengths, a spawning stock size (abundance or biomass), and the projection of a fish population size in future. However, most countries other than the developed countries have not identified ages of fish caught by fisheries or surveys in a consistent manner for a long time (e.g.,>20 years). Instead, data about fish body sizes (e.g., lengths) have been well available because of ease of measurement. To infer age compositions of fish in a target group using fish length data, we intended to improve the length frequency analysis (LFA), which Schnute and Fournier had introduced in 1980. Our study was different in two ways from the Schnute and Fournier's method. First we calculated not only point estimates of age compositions but also the uncertainty in those estimates. Second, we modified LFA based on the von Bertalanffy growth model (vB-based model) to allow both individual-to-individual and cohort-to-cohort variability in estimates of parameters in the vB-based model. For illustration, we used data about lengths of Korean mackerel Scomber japonicas caught by purse-seine fisheries from 2000-2016.