• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.25-28
• /
• 2017

In superconducting coil applications particularly in wet wound coils, coated conductor (CC) tapes are subjected to different type of stresses that could affect its electromechanical transport property. These include hoop stress acting along the length of the CC tape and the Lorentz force acting perpendicular to the CC tape's surface. Since the latter is commonly associated with the delamination problem of multi-layered REBCO CC tapes, more understanding and attention on the delamination phenomena induced in the case of coil applications are needed. Difference on the coefficient of thermal expansion (CTE) of each constituent layer of the CC tape, the bobbin, and the impregnating materials is the main causes of delamination in CC tapes when subjected to thermal and mechanical cycling. In the design of degradation-free superconducting coils, therefore, characterization of the delamination behaviors including mechanism and strength in the multi-layered REBCO CC tapes becomes a critical issue. Various trials to increase the delamination strength by improving interface characteristics at interlayers have been performed. In this study, in order to investigate the influences of laser cleaning and Ag annealing treated at the substrate side surface, transverse tensile tests were conducted under different sample configurations using $4.5mm{\times}8mm$ upper anvil. The mechanical delamination strength of differently processed CC samples was examined at room temperature (RT). As a result, the Sample 1 with the additional laser cleaning and Ag annealing processes and the Sample 2 with additional Ag annealing process only showed higher mechanical delamination strength as compared to the Sample 3 without such additional treatments. Sample 3 showed quite different behavior when the loading direction is to the substrate side where the delamination strength much lower as compared to other cases.

• Clinical and Experimental Pediatrics
• /
• 제53권2호
• /
• pp.190-194
• /
• 2010

목 적 : 애성 및 음성 변동은 심장병 환자에서 관찰될 수 있는데 이러한 음성 변동 정도를 음향학적 지표의 평가로 분석하여, 소아에서 선천성 심장병 종류에 따른 음성 변동을 음향학적 요소로 분석하고자 하였다. 방 법 : 수술 전 선천성 심장병 환아 94명을 연구 대상으로 하였고 심실 중격 결손, 동맥관 개존, 심방 중격 결손, 폐동맥 협착, 활로 사징이 포함되었으며, 음성 변동을 조사하기 위한 음향 지표 분석은 통증 자극을 통하여 얻어진 음성 자료를 multi-dimensional voice program system을 이용하여 평가하였다. 연구에 사용된 음향 지표로 average fundamental frequency, length of analyzed sample, jitter percent, shimmer, noise to harmonic ratio를 분석하였다. 결 과 : 음향 지표인 average fundamental frequency은 동맥관 개존, 심실 중격 결손, 활로 사징 경우에서 유의한 감소를 나타냈으며, length of analyzed sample은 연구 대상 선천성 심장병 환아에서 대조군에 비해 의미있는 차이를 나타내지 않았다. Jitter percent, shimmer, noise to harmonic ratio는 심실 중격 결손, 동맥관 개존, 심방 중격 결손에서 대조군에 비해 증가되었다. 이러한 음성 변동은 연구 대상 선천성 심장병 중 동맥관 개존에서 음도변이, 강도변이, 음성의 소음 정도가 가장 뚜렷하게 나타났으며, 동맥관 개존, 심실 중격 결손, 심방 중격 결손 순으로 그 음성 변동의 특징을 나타냈다. 결 론 : 수술 전 선천성 심장병 환아에서 음성을 음향학적 지표로 비교 분석한 결과 음향학적 지표들이 심장 질환의 유형별 차이를 보이는데 좌우 단락 심질환군에서 현저한 비정상적 음향학적 지표를 나타냈다.

• 품질경영학회지
• /
• 제32권4호
• /
• pp.169-183
• /
• 2004

The synthetic control chart (SCC) proposed by Wu and Spedding (2000) is to detect shifts in the process mean. The performance was re-evaluated by Davis and Woodall (2002), and the steady-state average run length (ARL) performance was shown to be inferior to cumulative sum (CUSUM) or exponentially weighted moving average (EWMA) chart This paper proposes a simple adaptive scheme to improve the performance of the synthetic control chart. That is, once a non-conforming (NC) sample occurs, we investigate the next L-consecutive samples with larger sample sizes and shorter sampling intervals. We employ a Markov chain model to derive the ARL and the average time to s19na1 (ATS). We also propose a statistical design procedure for determining decision variables. Comprehensive comparative study shows that the proposed control chart is uniformly superior to the original SCC or double sampling (DS) Χ chart and comparable to the EWMA chart in ATS performance.

• The Korean Journal of Ecology
• /
• 제12권3호
• /
• pp.133-144
• /
• 1989

The morphology and flowering time of two Suaeda japonica populations from different habitats, the creek and the bank of the mudflat in Sorae, were surveyed. And standard transplantation and reciprocal transplantation were carried out to determine whether their characteristics were genetically fixed or not. Also soil sample of these habitats were analyzed. The amounts of loss on ignition, maximum field capacity, total nitrogen, exchangeable calcium and potassium, and soluble phosphorus were found to be significantly different between two habitats. Leaf thickness, leaf width, leaf length, stem height number of branches, and number of seeds were significantly different between plants of two populations. And flowering times of two populations did not overlap. According to the results of transplantation, leaf width, leaf thickness, and flowering times were the same as those at their original habitat. But the stem lenght, leaf lenght, number of branches and unmber of seeds were not. Therefore, the differences in the leaf length, leaf thickness, and flowering time seemed to bo genetically fixed. It were suggested that the creek bank populations of Suaeda japoinica were to be considered as different ecotypes.

• 산업경영시스템학회지
• /
• 제27권3호
• /
• pp.14-20
• /
• 2004

The coefficient of variation(CV) which is a relatively dimensionless measure of variability is widely used to describe the variation of sample data. However, the properties of CV distribution are little available and few research has been done on estimation and interpretation of CV. In this paper, we give an outline of statistical properties of coefficient of variation and design of control chart based on this statistic. Construction procedures of control chart are presented. The proposed control chart is an efficient method to monitor a process variation for short production run situation. Futhermore, we evaluated the performance of CV control chart by average run length(ARL).

• 간호행정학회지
• /
• 제15권3호
• /
• pp.455-462
• /
• 2009

Purpose: The purpose of this study was to investigate the influencing factors of customer loyalty among guardians of residents in nursing homes. Methods: The sample of this study consisted of 229 guardians of residents in nursing homes. Data were collected with self-administrated questionnaires and analyzed hierarchical multiple regression. Results: All variables were positively correlated with customer loyalty except the length of stay. It was found that residents' length of stay, customer satisfaction and service value had significant influence on customer loyalty. The explained variance for customer loyalty was 71.3%. The service value had the greatest influence on customer loyalty. Conclusions: These findings provide strong empirical evidence for customer satisfaction and service value in explaining customer loyalty of guardian of residents in nursing homes.

• Journal of Biosystems Engineering
• /
• 제22권2호
• /
• pp.227-236
• /
• 1997

Manual grading and sorting of red-ginsengs are inherently unreliable due to its subjective nature. A computerized technique based on optical and geometrical characteristics was studied for the objective quality evalution. Spectral reflectance of three categories of red-ginsengs - "Chunsam", "Chisam", "Yangsam" - were measured and analyzed. Variation of reflectance among parts of a single ginseng was more significant than variation among the quality categories of ginsengs. A PC-based image processing algorithm was developed to extract geometrical features such as length and thickness of body, length and number of roots, position of head and branch point, etc. The algorithm consisted of image segmentation, calculation of Euclidean distance, skeletonization and feature extraction. Performance of the algorithm was evaluated using sample ginseng images and found to be mostly sussessful.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.413-420
• /
• 2000

Cheju Island has nature of typical trass through volcanic activities in many times. The soil in Cheju Island has principally sprung from basalt and partially made up of trachyte, trachyte's nature and site. Also ancient relics, plain coarse pottery's kilns and pantiles kilns are homogeneously distributed all over the Cheju Island. In this study, as a result of X-ray fluorescence spectrometer and Mossbauer spectroscopy of a sample are from plain coarse pottery and pantiles in 5 regions of Cheju Island. It is thought that these samples are partially formed from neutral volcanic rock like trachyte and Atomicity state of iron is almost Fe$\^$3+/. Also the magnetic hyperfine field length of goethite, contained these samples is less than synthetic goethite magnetic hyperfine field length and this result shows that disintegration of inner magnetic order, created by partial substitution of diamagnetic positive ion containing Fe$\^$3+/ and Al$\^$3+/ in goethite lattice.

• 대한가정학회지
• /
• 제20권3호
• /
• pp.25-34
• /
• 1982

The manufacture of children's wear is another part of the giant industry. However, the production of children's wear remains a small factory operation without scientific study. This study is aimed at establishing the normal sizes for slacks pattern making of 6∼8 years old children. The sample were classified into 5 groups of stature. The findings are as follows: 1) In analysis of stature group 110∼115cm to 130∼135cm there were almost significant differences of the mean values of all items. Comparison of physique shows even variation between stature group. 2) The correlation among all the parts of the body is strong in the case of the Stature. 3) The result of regression analysis is as follows. In slacks pattern making Back Waist Height and Slacks Length were exactly determined by Stature. Waist to Knee were exactly determined by Slacks Length.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.263-264
• /
• 2006

In this paper, an efficient and fast algorithm to reduce calculation amount of FIR(Finite Impulse Responses) filtering is proposed. Proposed algorithm enables arbitrary size of parallel processing, and their structures are also easily derived. Furthermore, it is shown that the number of multiplication/sample is reduced, and number of instructions using MAC(Multiplication and Accumulation) processor are also reduced. For theoretical improvement, numbers of sub filters are compared with those of conventional algorithm. In addition to the theoretical improvement, it is shown that number of element for hardwired implementation are reduced comparison to those of the conventional algorithm.