• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.3
• /
• pp.154-160
• /
• 1970

The present paper deals with the growth of yellow croaker by scale age reading. This study is based on material from 596 specimens caught by the Danish seine in the Yellow Sea during the period from June 1967 to April 1968. Ring marks of the scale were formed from April to July, corresponding to the spawning season of the fish reported by Bae (1960). Growth rate of each radius of the ring was approximately 0.73. The relationship between the total length and radius of scales, and the relationship between the body weight and total length are represented by the following equations respectively: L=61.350R+50.184 $$W=4.298L^{3.227}\times10^{-3}$$ Maximum total length calculated by the diagram of Walford's growth transformation, $$L_{n+1}=0.6866L_n+10.8730$$, was 346.9mm. Growth curve of the fish can be expressed by the following von Bertalanffy's equation : $$L_t=346.9(1-e^{-0.376(t+0.609)})$$

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.295-301
• /
• 2016

In this study, relationship between seed origin and growth rate of Alnus glutinosa from different seed collection (Yugoslovia, ltaly, United Kingdom, Bulgaria) was investigated with focused on anatomical properties as wood fiber length, vessel element length and diameter. Alnus glutinosa showed diffuse-porous wood with scalariform perforation in alternate pitting. Ray height was 9~11 in tangential section and ray number were 16~26 in cross section. There were no differences on latewood focused on wood fiber length, length and diameter of vessel element, but difference on earlywood. Other than Yugoslavian seed, there was better growth rate with shorter wood fiber and vessel element length on latewood. However, seed from Yugoslovain showed better growth rate with longer wood fiber and vessel element length than other 3 seed orgins.

• Korean Journal of Veterinary Research
• /
• v.33 no.2
• /
• pp.277-283
• /
• 1993

In the present study, observations were made on the life-history of Lymnaea viridis under laboratory conditions, involving incubation period of the eggs and their hatching rate, shell length of the newly hatched snails, sexual maturity, size of the snails when the snail produced the first egg-mass, the number of eggs in each egg-mass, egg-laying, ovipostion, growth rate of the snails, and longevity of the snail. At temperatures between $19.8^{\circ}C$ to $22.5^{\circ}C$, incubation period of the eggs occupied 10~12 days, and after beginning of hatching, all young snails emerged completely from the egg-mass within 5 days. The hatching rate was 88%. The average shell length of the newly hatched snails was about 0.064cm. The rate of growth was extraordinarily rapid under good laboratory conditions. When two snails were reared in one culture vessel($20{\times}15{\times}5cm$) with blue-green algae at about $22^{\circ}C$, snail growth was optimal, taking 37 days to reach 1.2cm in shell length. Sexual maturity reached in about 19 days. The size of the snails at sexual maturity was $0.78{\pm}0.05cm$ in length and $0.47{\pm}0.04cm$ in width. The first egg-masses produced were $0.59{\pm}0.22cm$ in length and $0.34{\pm}0.08cm$ in width, and contained 7~38 eggs. The eggs are usually laid in water. The egg-laying was affected by food and temperature. Snails fed with blue-green algae at about $22^{\circ}C$ produced larger egg-masses than the snails fed with fish food at about $26^{\circ}C$. Under conditions of continuous activity and growth, the maximum expectation of life appears to be 109~350(mean 230) days. And the shell length of snails at death were 1.39~1.64cm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.1
• /
• pp.50-52
• /
• 2007

The growth of young-of-the-year blue spot mudskipper, Boleophthalmus pectinirostris, was investigated using length-frequency data for 395 individuals collected from a mud flat in southwestern Korea between August and October 2001. Three cohorts were separated by the Bhattacharya method. In October, individuals of cohort-I reached 98 mm in total length, whereas those of cohort-III reached just 66 mm. Each cohort reached hibernation in November, that could be related to the ring formation in the following year.

• The korean journal of orthodontics
• /
• v.23 no.3 s.42
• /
• pp.295-309
• /
• 1993

The purpose of this study was to investigate the effect of jaw growth in a growing rabbits, when they are subjected to refractive force and after removal of refractive force. The experimental animals were Oryctolagus couniculus, male rabbits of 4 weeks of age. The mandible is retracted with 200gm in force of each side to the posterior and superior direction for 14 hours a day. Then rabbits were used as control group. First experimental group received refractive force for 4 weeks. Second experimental group received for 8 weeks. Third experimental group received for 12 weeks. True lateral films and dorso-ventral films were taken before wearing appliances, 4 weeks, 8 weeks, 12 weeks and 16 weeks after wearing appliance. The changes of rabbits jaw growth were observed radiographically. The findings were as follows : 1. Mandibular refractive force decreased total mandibular length, mandibular condylar length and angular length. 2. Mandibular refractive force increased nasal height, condylar width and angular width. 3. Mandibular refractive force decreased mandibular lenght growth but increased mandibular width growth. 4. There is no phenomena of catch-up growth after refractive force removal.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.781-789
• /
• 1988

The fatigue crack growth and crack closure behavior of long through-thickness cracks and small half-penny shaped surface cracks were investigated in 5083-H113 Aluminum alloy under constant amplitude testing by the unloading elastic compliance method. It was found that, in the Region II, the crack growth behavior of both through-thickness and surface cracks exhibited the tri-linear form with two transitions and no concern with stress ratio R. In the Region I $I_{ab}$ and I $I_{b}$, through-thickness cracks grew faster than surface cracks in length direction, but at .DELTA. K .leq.4 MPa.root.m for R=0.1 the growth rates of surface cracks in depth direction, grew faster than those of through-thickness cracks. When the crack closure was considered, the growth rates of through-thickness cracks lay between the growth rates of depth direction and the growth rates of length direction in surface cracks. It is suspected that this was caused by the difference of crack closure at depth and length direction of surface cracks.s.

• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.8-13
• /
• 2013

Fatigue crack growth tests were conducted on urban railway wheel steel under mode I and mixed-mode conditions. Fatigue crack growth rates were evaluated in terms of equivalent stress intensity factor ranges, using both the extended and projected crack lengths. The equivalent stress intensity factor range with the growth rate results obtained under mode I loading conditions can be used to predict the crack growth rate under mixed-mode loading conditions. Extended crack length rather than projected crack length is appropriate for the prediction of the crack growth rate under the mixed-mode loading conditions.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2023

Power transmission shafts in rotary wing aircraft use a hollow shaft to reduce weight. We can apply linear elastic fracture mechanics to predict crack propagation behavior. This paper predicted crack growth life of a hollow shaft with a circumferential through-type crack by finite element analysis. A 2D finite element model was created by applying a torsion and forming elements considering cracks. We defined the initial crack length and performed the finite element analysis by increasing the crack length to derive stress intensity factor at crack tips. We defined the length just prior to the stress intensity factor exceeding the fracture toughness as the crack limit length. We calculated the crack limit length using a handbook and numerically integrated the crack growth rate equation to derive growth life of each crack. The growth life of each crack was compared to verify the proposed finite element analysis method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.134-138
• /
• 2000

Most parts of alfalfa plant have been reported to contain autotoxic substances that inhibit seed germination and early seedling growth, however, the chemical(s) is not still studied much. Effect of seed leachates of 'Vernal' alfalfa (Medicago sativa L.) was evaluated for inhibition of alfalfa germination and root growth through bioassay. Alfalfa seeds were extracted in 1 L deionized water for 1 h after soaking and the leachates caused to reduce root length of alfalfa significantly as the soaking time increased. Crude seeds at 4 g L$L^{-1}$ exudated autotoxins that reduce significantly root length by 34 % compared to the control, when the seeds soaked in deionized water for 24 h. However, the extracts did not affect final germination as well as speed of germination. Extracts from ground seeds significantly reduced speed of germination (GT 50) and root length. The results indicate that release of autotoxic substances from seeds during seed imbibition was increased with increase of soaking time and seed amount, and that autotoxicity was more occurred in ground seeds than in crude seeds.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.2
• /
• pp.173-181
• /
• 1993

This work has been investigated the ralationship between single surface crack length and crack depth have influence on the fatigue life. The simulation based on experimental results of 2.25 Cr-1Mo steel at various crack configuration ratios has enabled successful prediction of fatigue life at room temperature. The effect of crack depth should be considered for predicting fatigue crack growth rates as well as that of surface crack length. It is also shwn that the crack growth mechanisms are in good agreement with expreimental data according to the interaction of crack length and crack depth.