• 제목/요약/키워드: Length dependence

검색결과 321건 처리시간 0.027초

$^{11}B$ NMR study of $M_gB_2$ superconductor

  • Lee, Moon-Hee;Halperin, W.P.;Cho, B.-K.
    • 한국자기공명학회논문지
    • /
    • 제9권1호
    • /
    • pp.21-28
    • /
    • 2005
  • $^{11}B$ nuclear magnetic resonance (NMR) measurements have been performed to investigate electronic structures and vortex states of $M_gB_2$ superconductor. The central transition shows a narrow peak down to 25 K at 3.15 T. Below 25 K, an extra line starts to show up and dominates. The extra line is broad and asymmetric with a long tail in the high frequency side, which confirms that this originates from vortex pinning below the irreversibility temperature. From temperature evolution of the fraction and linewidth of the broad portion, temperature dependence of coherence length and penetration depth are extracted.

  • PDF

플래시 EEPROM 응용을 위한 산화막 특성 (The Oxide Characteristics in Flash EEPROM Applications)

  • 강창수;김동진;강기성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.855-858
    • /
    • 2001
  • The stress induced leakage currents of thin silicon oxides is investigated in the VLSI implementation of a self learning neural network integrated circuits using a linearity synapse transistor. The channel current for the thickness dependence of stress current, transient current, and stress induced leakage currents has been measured in oxides with thicknesses between 41 ${\AA}$, 86${\AA}$, which have the channel width ${\times}$ length 10 ${\times}$1${\mu}$m, 10 ${\times}$0.3${\mu}$m respectively. The stress induced leakage currents will affect data retention in synapse transistors and the stress current, transient current is used to estimate to fundamental limitations on oxide thicknesses. The synapse transistor made by thin silicon oxides has represented the neural states and the manipulation which gaves unipolar weights. The weight value of synapse transistor was caused by the bias conditions. Excitatory state and inhitory state according to weighted values affected the channel current. The stress induced leakage currents affected excitatory state and inhitory state.

  • PDF

Magnetic Shielding Effect on Halbach Cylinder used in Magnetic Refrigerators

  • Baek, Un Bong;Lee, Jong Suk;Yu, Seong-Cho;Ryu, Kwon-Sang
    • Journal of Magnetics
    • /
    • 제19권4호
    • /
    • pp.349-352
    • /
    • 2014
  • The system for producing magnetic field constitutes an important component of magnetic refrigerator. Many researchers have directed significant effort to increase the magnetic field intensity, because the magnetocaloric effect at the Curie temperature increases with the power of 2/3 of the magnetic field. In this study, we report the simulation of the magnetic field intensity at polar axis of a Halbach cylinder (HC) by i) changing the length and thickness of the HC, ii) having with or without gap of the HC, and iii) surrounding the HC with a soft magnet shell, acting as a shielding. We simulated the field distribution of a HC with a finite size. Furthermore, the detailed numerical results of the magnetic field distribution and its dependence on shielding are presented in this study.

Consideration of Spindle Immersion Depth on Determining the Viscosity of Glass Melts by Rotating Cylinder Method

  • Kim, Young-Jin;Kim, Ki-Dong;Lee, Seung-Beun;Hwang, Song-Hee
    • 한국세라믹학회지
    • /
    • 제41권4호
    • /
    • pp.344-347
    • /
    • 2004
  • The influence of spindle immersion depth on the determination of glass melt viscosity was examined in rotating cylinder method. The exact adjustment of spindle immersion depth into soda lime silicate standard glass melts could be peformed by self-constructed electric system. The results showed a slight dependence of viscosity value on the immersion depth change of spindle shaft. The viscosity error per unit length of spindle was 0.4%/mm under the present cylinder dimension.

Deintercalation and Thermal Stability of Na-graphite Intercalation Compounds

  • Oh, Won-Chun
    • Carbon letters
    • /
    • 제2권1호
    • /
    • pp.22-26
    • /
    • 2001
  • Na alloyed graphite intercalation compounds with stage 1 and 2 were synthesized using the high temperature and pressure technique. Thermal stability and staging transitions of the compounds were investigated depending on heating rates. The thermal stability and temperature dependence of the deintercalation compounds were characterized using differential scanning calorimeter (DSC) analyzer. Enthalpy of formations were confirmed at temperatures between 25 and $500^{\circ}C$, depending on the various heating rates. The structure ions and interlayer spaces of the graphite were identified by X-ray diffraction (XRD). Diffractograms of stages with non-integral (00l) values were obtained in the thermal decomposition process, and stacking disorder defects and random stage modes were observed. The average value of the interlayer C-C bond lengths were found approximately $2.12{\AA}$ and $1.23{\AA}$ from the diffractions. Based on the stage transition, the degree of the deintercalaton has a inverse-linear relationship against the heating rate.

  • PDF

2차원 BJT의 전기적 특성 및 왜곡 해석 시뮬레이션 (Simulation for the analysis of distortion and electrical characteristics of a two-dimensional BJT)

  • 이종화;신윤권
    • 전자공학회논문지D
    • /
    • 제35D권4호
    • /
    • pp.84-92
    • /
    • 1998
  • A program was developed to analyze the electrical characteristics and harmonic distrotion in a two-dimensional silicon BJT. The finite difference equations of the small signal and its second and thired harmonics for basic semiconductor equations are formulated treating the nonlinearity and time dependence with Volterra series and Taylor series. The soluations for three sets of simultaneous equations were obtained sequantially by a decoupled iteration method and each set was solved by a modified Stone's algorithm. Distortion magins and ac parameters such as input impedance and current gains are calculated with frequency and load resistance as parameters. The distortion margin vs. load resistancecurves show cancellation minima when the pahse of output voltage shifts. It is shown that the distortionof small signal characteristics can be reduced by reducing the base width, increasing the emitter stripe length and reducing the collector epitaxial layer doping concentration in the silicon BJT structure. The simulation program called TRADAP can be used for the design and optimization of transistors and circuits as well as for the calculation of small signal and distortion solutions.

  • PDF

코세라 탄성론을 이용한 기공성 재료의 탄성거동에 관한 실험적 연구 (Experimental Study on Cosserat Elasticity of Porous Solids)

  • 정민호;윤성진;박현철
    • 대한기계학회논문집
    • /
    • 제17권2호
    • /
    • pp.342-350
    • /
    • 1993
  • Experiments are performed to determine the dependence of torsional rigidity upon the cross-sectional area for specimens of dense polyurethane foam. Testing equipment was designed and fabricated in the laboratory to satisfy the experimental characteristics. Results show the increase of torsional rigidity compared to the expected value based on the conventional elasticity. And this can be explained that the consideration of the internal motions of constitutive particles predicts the elastic behavior of the material better.

고체입자가 부상된 이상유동에서 운반유체의 난류강도에 대한 해석적 접근 (A Theoretical Approach on the Turbulence Intensity of the Carrier Fluid in Two-phase Particle-laden Flows)

  • 김세윤;이충구;이계복
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.2037-2042
    • /
    • 2003
  • The purpose of this research is to develop the model of turbulence modulation due to the presence of particles in various types of particle-laden flows. Available experimental data were surveyed and the dependence of turbulence modulation of carrier-phase on particle size, concentration and particle Reynolds number were examined. This study takes into account the effect of wake produced by particle, the drag between phases and the velocity gradient in the wake to estimate the production of turbulence. The model of turbulence modulation using the mixing length theory under the assumption of equilibrium flow is proposed. Numerical results show that the model is successful in predicting the characteristics of the particle-laden flow in various conditions both qualitatively and quantitatively.

  • PDF

The Structural distortion by a Substituent : Monosubstituted Benzene Derivative cases

  • 민병진
    • 자연과학논문집
    • /
    • 제15권1호
    • /
    • pp.47-56
    • /
    • 2005
  • The substituent dependence of geometric distortion through the two independent electronic substituent effects is analyzed for mono-substituted benzene derivatives of $C_{2v}$. Based on resonance structures, quantitative relationships expressing the resonance and field/inductive contribution terms in bond distortions are derived. The calculated field-effect parts of $C_{ipso}$_$C_{ortho}$ ring bonds increase and decrease compared to benzene for electropositive and electronegative substituents respectively. The nonbonded axial distance, $C_{ipso}$....$C_{para'}$ decreases for electronegative substituents and increases for electropositive substituents. As the electronegativity increases, the distance $C_{ortho}$....$C_{ortho'}$ increases. With the $\pi$-donors, $C_{meta}$....$C_{meta'}$ nonbonded distances are shorter compared to the ones of benzene, and for $\pi$-acceptors, the are longer. Our model based on valence bond approach predicts that the average bond length determined the area of ring, and the sum of the angles <$C_{ortho}$_$C_{ispo}$_$C_{ortho}$ and <$C_{meta}$_$C_{para}$_$C_{meta}$ determines the axial distance.

  • PDF

이중 헤테로 접합 레이저 다이오드의 횡방향 도파 및 빔폭 변화에 관한 연구 (A Study on the Lateral Waveguiding & Beam Width Variation of DH Laser Diode)

  • 김은수;박한규
    • 대한전자공학회논문지
    • /
    • 제20권1호
    • /
    • pp.15-21
    • /
    • 1983
  • 본 논문에서는 스트라입 구조형 이중 헤테로 접합 레이저 다이오드의 횡방향 도파 기구에 대한 이론적 해석이 시도되었다. 해석 과정에서 이득 및 굴절율의 공간적 변화를 주입전류의 수학적 모델로 결정하고 섭동된 파동방정식에 의한 횡방향 도파 해석을 통해 빔폭의 활성층 두께 스트라입 폭 및 캐비티 길이 의존성을 분석하였다.

  • PDF