• 제목/요약/키워드: Length Extraction

검색결과 409건 처리시간 0.024초

Capacitance - Voltage 방법을 이용한 MOSFET의 유효 채널 길이 추출 (Accurate Extraction of the Effective Channel Length of MOSFET Using Capacitance Voltage Method)

  • 김용구;지희환;한인식;박성형;이희덕
    • 대한전자공학회논문지SD
    • /
    • 제41권7호
    • /
    • pp.1-6
    • /
    • 2004
  • 나노 급 소자에서의 성능이 유효 채널 길이에 대하여 더욱 민감하게 되므로 정확한 유효 채널 길이의 추출이 중요하다. 본 논문에서는 100 ㎚ 이하의 MOSFET에서 유효 채널 길이를 추출하기 위하여 새로운 정전용량-전압(Capacitance-Voltage) 방법을 제안하였다. 제안한 방법에서는 게이트와 소스와 드레인 사이의 정전용량(C/sub gsd/)를 측정하여 유효 채널 길이를 추출하였다. 그리고 추출된 유효 채널 길이와 기존의 1/β 과 Terada 방법 그리고 다른 정전용량-전압 방법의 추출된 유효 채널 길이의 결과들과 비교하여 본 논문에서 제안한 추출방법이 100 ㎚ 이하 크기의 MOSFET의 유효 채널 길이를 추출함에 타당함을 증명하였다.

시불변 특징점 추출 및 정합을 이용한 주기 신호의 길이 보정 기법 (A Method to Adjust Cyclic Signal Length Using Time Invariant Feature Point Extraction and Matching(TIFEM))

  • 한아향;박정술;김성식;백준걸
    • 한국시뮬레이션학회논문지
    • /
    • 제19권4호
    • /
    • pp.111-122
    • /
    • 2010
  • 본 연구에서는 여러 제조 공정에서 발생하는 주기 신호의 불규칙한 길이를 보정하기 위하여 시불변 특징점 추출 및 정합(Time Invariant Feature point Extraction and Matching, 이하 TIFEM)을 이용한 길이보정 알고리즘을 제안한다. 신호 중간에 길이 변동이 발생 하는 주기신호의 경우 정확하게 길이를 보정하기 위해서는 더 많은 수의 특징점이 필요하며, 추출된 특징점은 신호의 패턴 정보를 포함하고 시간과 크기에 불변한 성질을 가져야 한다. 본 연구에서 제안하는 TIFEM알고리즘은 위의 성질을 가지는 신호 고유의 특성을 추출하고 추출한 특성들을 각각 시점에 해당하는 특성 벡터로 구성한다. 구성된 특성 벡터에서 유효한 벡터만을 걸러내어 길이보정을 위한 특징점으로 선정한다. 선정된 특징점들을 정합한 후 구간별로 길이를 보정하여 보다 정확한 주기 신호의 길이보정을 수행한다. 제안한 알고리즘의 성능을 검증하기 위하여 실제 반도체 공정에서 발생되는 3종류의 신호를 모방하여 생성한 실험데이터를 이용하여 실험을 수행하였다.

정상교합자와 I급 부정교합자에서 치아와 기저골의 관계에 대한 비교 분석 (COMPARATIVE ANALYSIS OF THE RELATIONSHIP BETWEEN BASAL BONE AND TEETH IN NORMAL OCCLUSION AND ANGLE'S CLASS I MALOCCLUSION)

  • 문혜정;경희문;권오원;김정민
    • 대한치과교정학회지
    • /
    • 제22권2호
    • /
    • pp.413-426
    • /
    • 1992
  • 저자는 좋은 교합관계를 유지하기 위한 치아와 기저골과의 관계를 분석하기 위해 정상교합자와 Angle써 I급 부정교합자(비발치군, 발치군)의 경석고 모형상에서 최대치아근원심폭경, 기저악궁폭경 및 기저악궁장경을 계측하고 최대치아근원심폭경 합, 최대치아근원심폭경 합에 대한 기저악궁폭경 비, 최대치아근원심폭경 합에 대한 기저악궁장경 비 및 최대치아근원심폭경 합에 대한 기저악궁폭경과 기저악궁장경합의 비를 산출하여 통계학적으로 분석한 결과 다음과 같은 결과를 얻었다. 1. 최대치아근원심폭경합에 대한 기저악궁폭경 비는 상악에서 정상교합군은 $46.9{\pm}2.6\%$, 비발치군은 $49.4{\pm}3.9\%$, 발치군은 $42.5{\pm}3.3\%$로 나타났으며, 하악에서 정상교합군은 $46.6{\pm}2.4\%$, 비발치군은 $47.5{\pm}4.0\%$, 발치군은 $42.6{\pm}2.6\%$로 나타났다. 2. 최대치아근원심폭경합에 대한 기저악궁장경 비는 상악에서 정상교합군은 $33.4{\pm}1.9\%$, 비발치군은 $33.9{\pm}1.8\%$, 발치군은 $28.7{\pm}2.5\%$로 타나났으며, 하악에사 정상교합군은 $34.4{\pm}4.3\%$, 비발치군은 $36.5{\pm}1.9\%$, 발치군은 $31.5{\pm}2.5\%$로 나타났다. 3. 최대치아근원심폭경합에 대한 기저악궁폭경과 기저악궁장경 합의 비는 상악에서 정상교합군은 $80.3{\pm}3.4\%$, 비발치군은 $83.3{\pm}4.8\%$, 발치군은 $71.2{\pm}4.3\%$로 나타났으며, 하악에서는 정상교합군은 $81.0{\pm}5.2\%$, 비발치군은 $84.0{\pm}5.4\%$, 발치군은 $74.1{\pm}4.1\%$로 나타났다. 4. 최대치아근원심폭경합에 대한 기저악궁폭경 비의 $95\%$ 신뢰구간은 상악에서 정상교합군은 $46.3-47.5\%$, 비발치군은 48.1-50.7, 발치군은 $41.7-43.3\%$로 나타났으며, 하악에서 정상교합군은 $46.1-47.2\%$, 비발치군은 $46.1-48.8\%$, 발치군은 $42.0-43.3\%$로 나타났다. 5. 최대치아근원심폭경합에 대한 기저악궁장경비의 $95\%$신뢰구간은 상악에서 정상교합군은 $32.9-33.8\%$, 비발치군은 $33.3-34.5\%$, 발치군은 $28.1-29.2\%$로 나타났으며, 하악에서 정상교합군은 $33.4-35.4\%$, 비발치군은 $35.8-37.2\%$, 발치군은 $30.9-32.1\%$로 나타났다. 6. 최대치아근원심폭경합에 대한 기저악궁폭경과 기저악궁장경 합의 비의 $95\%$신뢰구간은 상악에서 정상교합군은 $79.5-81.0\%$, 비발치군은 $81.6-84.9\%$, 발치군은 $70.1-72.2\%$로 나타났으며, 하악에서 정상교합군은 $79.8-82.2\%$, 비발치군은 $82.1-85.5\%$, 발치군은 $73.1-75.1\%$로 나타났다. 7. 최대치아근원심폭경합, 기저악궁폭경, 기저악궁장경, 최대치아근원심폭경 합에 대한 기저악궁폭경 비, 최대치아근원심폭경 합에 대한 기저악궁장경 비 및 최대치아근원심폭경 합에 대한 기저악궁폭경과 기저악궁장경 합의 비에서 발치군 남자의 기저악궁장경을 제외하고는 상하악간에 상관관계가 있는 것으로 나타났다.

  • PDF

교정치료후의 변화에 관한 상악치열궁의 모형분석에 의한 연구 (MODEL ANALYSIS IN ORTHODONTIC TREATMENT CHANCES OF THE MAXILLARY DENTAL ARCH)

  • 이원철
    • 대한치과교정학회지
    • /
    • 제4권1호
    • /
    • pp.41-48
    • /
    • 1974
  • The author has selected 70 non-extraction and extraction cases. The linear measurements were made in the maxillary dental cast at pre-and post-treatment. The purpose of this study was to detect out the changes occured during orthodontic treatment. On the basis of findings of this study, the following results are made: 1. In extraction cases: 1) The maxillary intercanine width increased. 2) The maxillary dental arch width decreased. 3) The maxillary inter first molar width decreased. 4) The maxillary dental arch length decreased. 5) The maxillary dental arch length (I-3) increased. 2. In non-extraction cases, the maxillary intercanine width decreased in Angle's class III.

  • PDF

Accuracy Analysis of Extraction Methods for Effective Channel Length in Deep-Submicron MOSFETs

  • Kim, Ju-Young;Choi, Min-Kwon;Lee, Seong-Hearn
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제11권2호
    • /
    • pp.130-133
    • /
    • 2011
  • A comparative study of two capacitance methods to measure the effective channel length in deep-submicron MOSFETs has been made in detail. Since the reduction of the overlap capacitance in the accumulation region is smaller than the addition of the inner fringe capacitance at zero gate voltage, the capacitance method removing the parasitic capacitance in the accumulation region extracts a more accurate effective channel length than the method removing that at zero gate voltage.

Experimental investigations and development of mathematical model to estimate drop diameter and jet length

  • Roy, Amitava;Suneel, G.;Gayen, J.K.;Ravi, K.V.;Grover, R.B.
    • Nuclear Engineering and Technology
    • /
    • 제53권10호
    • /
    • pp.3229-3235
    • /
    • 2021
  • The key process used in nuclear industries for the management of radiotoxicity associated with spent fuel in a closed fuel cycle is solvent extraction. An understanding of hydrodynamics and mass transfer is of primary importance for the design of mass transfer equipment used in solvent extraction processes. Understanding the interfacial phenomenon and the associated hydrodynamics of the liquid drops is essential for model-based design of mass transfer devices. In this work, the phenomenon of drop formation at the tip of a nozzle submerged in quiescent immiscible liquid phase is revisited. Previously reported force balance based models and empirical correlations are analyzed. Experiments are carried out to capture the process of drop formation using high-speed imaging technique. The images are digitally processed to measure the average drop diameter. A correlation based on the force balance model is proposed to estimate drop diameter and jet length. The average drop diameter obtained from the proposed model is in good agreement with experimental data with an average error of 6.3%. The developed model is applicable in both the necking as well as jetting regime and is validated for liquid-liquid systems having low, moderate and high interfacial tension.

지혈겸자 적출술을 이용한 비용종 환자의 치험 1례 (The Case of Nasal Polyp Extraction which was treated with Hemostat Forceps)

  • 김동현;홍승욱
    • 한방안이비인후피부과학회지
    • /
    • 제28권2호
    • /
    • pp.85-92
    • /
    • 2015
  • Object : To report the case of the improved patient after the extraction with hemostst forcept. Methods : We treated one patient who visited Gabsan Korean medical clinic.First two times, We used acupuncture, fumigation, exsanguination, external medincine. He had some agonistic response. But It was not satisfactory. So We operated extraction with hemostat forceps. Result and Conclusion : 1. We extracted nasal polyp, the length of polyp was 5.5 cm2. After extraction, the patient had not headache, nasal congestion and so on.3. On intranasal endoscopy, left nose did not have polyp any more.4. Hemostat forceps extraction is effective to nasal polyp.

Application of Reactive Extraction to Recovery of Carboxylic Acids

  • Hong, Yeon-Ki;Hong, Won-Hi;Han, Dong-Hoon
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제6권6호
    • /
    • pp.386-394
    • /
    • 2001
  • Carboxylic acids are examples of compounds with wide industrial applications and high potential, This article presents the principles of reactive extraction along with the character-istics of tertiary amine extractants, while is given on considering the effect of the amine class and chain length, As such a brief overview the current research on reactive extraction, including the recovery of citric acid, selective amine-based extraction , and extractive fermentation is given. When discussing extractive fermentation strategies for reducing solvent toxicity are also suggested based on specific examples. Finally, solvent regeneration and stripping of extracted acid explained.

  • PDF

Angle씨 I급 부정교합 환자에서 교정치료 전, 후의 악궁크기 변화에 관한 연구 (THE STUDY OF ARCH DIMENSIONAL CHANGES BEFORE AND AFTER ORTHODONTIC TREATMENT IN ANGLE CLASS I MALOCCLUSION CASES)

  • 정미;유영규
    • 대한치과교정학회지
    • /
    • 제20권1호
    • /
    • pp.183-195
    • /
    • 1990
  • The purposes of present study were to identify possible relationships between post-treatment changes and post-retention changes. The patient's models were composed of 58 samples, and were classified non-extraction group (30 samples) and extraction group (28 samples). For each sample the first models were taken prior to the start of treatment, the second models just after the end of treatment, and the third models two years after. The results were as follows: 1. In the cases of non-extraction group, increases were in intermolar width of maxilla, interbicuspid width of maxilla and arch perimeter of mandible during treatment period, but decreases were in the same measurements during post-retention period. 2. In the cases of extraction group, decreases were in intermolar width of mandible, interbicuspid widths of maxilla and mandible, arch length of mandible, arch perimeters of maxilla and mandible during treatment period. 3. Significant decreases were in the irregularity index of both extraction and non-extraction group during treatment period. 4. There were significant differences of arch dimensional changes in intermolar widths of maxilla and mandible, interbicuspid widths of maxilla and mandible, arch lengths of maxilla and mandible, arch perimeters of maxilla and mandible between non-extraction and extraction group.

  • PDF