• Archives of Craniofacial Surgery
• /
• v.13 no.2
• /
• pp.135-138
• /
• 2012

Purpose: Reconstruction of the cleft earlobe is challenging. Several procedures are available to reconstruct congenital earlobe deformities. However, for large defective type, surgical procedures and designs are complex and tend to leave a visible scar. We present a simple method of reconstruction for defective type congenital cleft earlobe using a one stage technique with infraauricular transposition flap. This allows for easy and accurate size estimation and good aesthetic outcomes. Methods: A 4-year-old male patient has congenital cleft earlobe and antihelical deformity. Otoplasty for antihelical deformity correction and one stage infra-auricular transposition flap for earlobe reconstruction were performed. The flap was designed from the inferoanterior margin of the earlobe. The size of the flap was determined based on the normal side, and the width and length of the flap was 1 cm and 3 cm in size, respectively. An incision was made at the midline of the defective lobule. Further, the elevated flap was inserted. The elevated flap and the incision margins of the lobule were sutured together. Then, the donor site was closed primarily. Results: The volume and shape of the reconstructed earlobe were natural. There was no flap necrosis. The donor site had no morbidities and scar was not easily notable. Conclusion: Infra-auricular transposition flap can be designed easily and offer sufficient volume of earlobe. Furthermore, the scar is inconspicuous. In conclusion, infra-auricular transposition flap can be a good option for reconstructing a large defect type cleft earlobe.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.11
• /
• pp.30-40
• /
• 2001

In this paper, we propose a dynamic slot allocation algorithm for efficient transmission of VBR services in wireless ATM networks. The proposed algorithm is based on a hybrid dynamic parameter(DP) control which combines the strength of in-band control and out-of-band control by considering the variation characteristics of buffer length in distributed mobile terminals. This algorithm consists of four sub-algorithms: dynamic parameter determination algorithm, dynamic parameter transmission algorithm, estimation algorithm of the number of request slots, and prorated-allocation algorithm. As the proposed allocation algorithm based on the hybrid DP control scheme can offer nearly precise MAC level estimations of the requirements for each VBR, the algorithm makes it possible to obtain ideal allocation efficiency. The allocation efficiency of the algorithm is shown by numerical analysis. Simulation results show that the proposed algorithm has better performance than conventional schemes in terms of allocation efficiency, delay and cell loss ratio under VBR traffic.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.299-310
• /
• 2008

In this study, the regression analysis method was tested for the estimation of peak stress at stress concentration area in the cervical bone. Submerge type EZ plus implant (Megagen. Daegu, Korea), 4.1 mm in cervical diameter and 9.6 mm in endosseous length, were axisymmetrically modelled together with surrounding alveolar bone of which the width was 10 mm. Vertical force of 100 N was applied to a head of crown above 8.5 mm from the outer surface of the cortical bone. Four different mesh models were composed of differently sized elements in vicinity of sharp corners, and they include 6 stress monitoring points that are located in the same geometrical points regardless of the differences in the meshes. Primary consideration was given to the stresses in the cortical bone surrounding the implant neck. The results showed that virtually all the stresses were concentrated in the cortical bone regardless of mesh designs. The peak stresses were successfully calculated by a regression analysis in a stable manner, as far as the mesh is designed to represent the acute gradient of stresses near the sharp corner.

• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.14-18
• /
• 2013

Blades of horizontal axis are nowadays made of composite materials. Generally, composite materials satisfy design provides lower weight and good stiffness, while laminate composites have often damages as like the delamination and cracks at the interface of laminates. The box spar and tail parts of a blade are composed of the CFRP/GFRP hybrid laminate composites. However, delamination and the interfacial crack often occur in the interface of CFRP/GFRP hybrid laminate composites under the mixed mode fracture condition, especially mode I and mode II. Therefore, there is a need for the evaluation of the mixed mode fracture behavior during the delamination of CFRP/GFRP hybrid laminates. This study shows the experimental results for the delamination fracture toughness in CFRP/GFRP hybrid laminate composites. Fracture toughness experiments and estimation are performed by using DMMB(Dissimilar mixed mode bending) specimen. The materials used in the test are a commercial woven type CFRP(Carbon fiber reinforced plastic) prepreg(CF3327) and UD type GFRP(Glass fiber reinforced plastic) prepreg(HD224A). A CFRP/GFRP hybrid laminate composite is composed by the 10 plies CFRP and GFRP prepreg for DMMB. A thickness of CFRP and GFRP layer is 2.5mm and 3.0mm, respectively. Also the fulcrum location which is a loading parameter is changed from 80 to 100mm on the specimen of length 120mm because it defines the ratio of mode I to mode II. In this study, the effects of the fulcrum location are evaluated in the viewpoint of energy release rate in mode I and mode II contribution. The results show that the delamination crack initiates at higher displacement and lower load according to the increase of the fulcrum location ratio. And the variation of the energy release rate for mode I and II contributions for the mode mixity are shown.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.4
• /
• pp.544-550
• /
• 2020

This study was conducted to estimate the genetic improvements by selection criteria using the genetic parameters and breeding values for population of abalone Haliotis discus hannai. Genetic parameters and breeding values were estimated using all measurement data of growth traits (shell length, shell width and total weight) at 18 and 30 months old after artificial fertilization for 3,029 individuals produced in April 2014. Growth traits all exhibited moderate heritability (0.253-0.354). So it is considered that family selection will be more advantageous than individual selection. It was found that a higher genetic improvement could be expected when selecting the top 10% based on the breeding values of total weight rather than other traits. In particular, a higher genetic improvement could be expected when selecting the top 10% at 30 months old than 18 months old after artificial fertilization. This seems to be because the selection differential and heritability were higher at the 30 months old. Therefore, by estimating genetic parameters and breeding values of a population for production of the next generations by stage of growth, if they are used properly in selection and mating according to the improvement direction, it is considered that more breeding effects can be expected.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.384-392
• /
• 2017

A linear explosively formed penetrator(LEFP) is a modification of the explosively formed penetrator(EFP). An EFP is axisymmetric and has a dish-shaped liner while LEFP has a rectangular-shaped liner with curved cross section. Upon detonating LEFP forms laterally wide projectile like blade, leaving a long penetration hole on the target. On the other hand, a long-rod tungsten heavy alloy(WHA) penetrator is one of the major threats against most of the ground armored vehicles. In this paper, the feasibility of using an LEFP in protecting against a long-rod WHA penetrator by colliding LEFP into the threat was investigated through a set of numerical simulations. In this study, a scale-down WHA penetrator with length to diameter ratio(L/D) of 10.7 and 7.0 mm diameter was used to represent a long-rod WHA penetrator. LS-DYNA and Multi-Material ALE technique were employed for the simulation. For estimation of the protection effect by LEFP, residual penetration depths into RHA by the threat were compared according to various impact locations against the threat.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.619-623
• /
• 2006

When it comes environmental preservation and economic development throughout all the industries, it is adopted to regulate carbon dioxide emissions in United Nations Framework Convention on Climate Change. And we must be responsible for promoting the eco-friendly and sustainable development because of a registration of the Kyoto protocol. Almost all the domestic buildings have many problems that not only waste the resources and architectural energy, but also are not enough to recycling of the waste. So m this study the environment-friendship is estimated through assuming carbon dioxide emissions. And after indicators are derived through surveying the residential satisfaction, it is carefully thought to develop the Smart Component that increase the length of life and the flexibility and improve the comfortable circumstance in buildings.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.6
• /
• pp.341-349
• /
• 2014

Dynamic adaptive streaming over HTTP (DASH) is the most recent and promising technology to support high quality streaming services. In dynamic adaptive streaming over HTTP (DASH), a client consecutively estimates the available network bandwidth and decides the transmission rate for the forthcoming video chunks to be downloaded. In this paper, we propose a novel rate adaptation algorithm called quality of experience QoE-enhanced adaptation algorithm over DASH (QAAD), which preserves the minimum buffer length to avoid interruption and minimizes the video quality changes during the playback. We implemented a DASH test bed and conducted extensive experiments. Experimental results demonstrate that under fluctuating network conditions, QAAD provides seamless streaming with stabilized video quality while the previous buffer-aware algorithm (i.e., QDASH[9]) frequently changes the video quality and undergoes the interruption.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.237-247
• /
• 2018

The basin characteristics reflect the attributes of geomorphological pattern of basin and stream networks affect the rainfall-runoff. In order to analyze the relationship between the basin runoff and stream morphometric characteristics, the morphometric characteristics were investigated for 27 water-level observation stations on 19 rivers in the Han River basin using Arc-map. The morphometric characteristics were divided into linear, areal and relief aspects for calculation while the annual mean runoff ratio as a basin response by rainfall was estimated using the measured precipitation and discharge to analyze the rainfall-runoff characteristics. The correlation among the morphometric parameters were schematized to analyze the correlations among them. The multiple regression equation for rainfall-runoff ratio was provided with morphometric parameters of stream length ratio, form factor ratio, shape factor, stream area ratio, and relief ratio and the coefficient of determination was 0.691. The RMSE and MAPE between the measured and the estimated annual runoff rates were found as 0.09, 11.61% respectively, the suggested regression equation showed good estimation.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.3
• /
• pp.237-245
• /
• 2015

A strategy is needed for a regional survey of geosynchronous orbits (GSOs) to monitor known space objects and detect uncataloged space objects. On the basis of the Inter-Agency Debris Committee's recommendation regarding the protected region of geosynchronous Earth orbit (GEO), target satellites with perigee and apogee of $GEO{\pm}200km$ and various inclinations are selected for analysis. The status of the GSO region was analyzed using the satellite distribution based on the orbital characteristics in publicly available two-line element data. Natural perturbation effects cause inactive satellites to drift to two stable longitudinal points. Active satellites usually maintain the designed positions as a result of regular or irregular maneuver operations against their natural drift. To analyze the detection rate of a single optical telescope, 152 out of 412 active satellites and 135 out of 288 inactive satellites in the GSO region were selected on the basis of their visibility at the observation site in Daejeon, Korea. By using various vertical view ranges and various numbers of observations of the GSO region, the detection efficiencies were analyzed for a single night, and the numbers of follow-up observations were determined. The orbital estimation accuracies were also checked using the arc length and number of observed data points to maintain the GSO satellite catalog.