• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.2
• /
• pp.19-26
• /
• 2011

SATEEC ArcView GIS system was developed using the Universal Soil Loss Equation (USLE) and sediment delivery ratio (SDR) modules. In addition, time-variant R and C modules and $R_5$ module were developed and integrated into the SATEEC system in recent years. The SATEEC ArcView GIS 2.1 system is a simple-to-use system which can estimate soil erosion and sediment yield spatially and temporarily using only USLE input data, DEM, and daily rainfall dataset. In this study, the SATEEC 2.1 system was used to evaluate the effects of USLE LS input data considering slope length segmentation on soil erosion and sediment yield estimation. Use of USLE LS with slope length segmentation due to roads in the watershed, soil erosion estimation decreased by 24.70 %. However, the estimated sediment yield using SATEEC GA-SDR matched measured sediment values in both scenarios (EI values of 0.650 and EI 0.651 w/o and w/flow segmentation). This is because the SATEEC GA-SDR module estimates lower SDR in case of greater soil erosion estimation (without flow length segmentation) and greater SDR in case of lower soil erosion estimation (with flow length segmentation). This indicates that the SATEEC soil erosion need to be estimated with care for accurate estimation of SDR at a watershed scale and for accurate evaluation of BMPs in the watershed.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.4
• /
• pp.293-306
• /
• 2019

In this study, the observational arc-length effect on orbit determination (OD) for the Korea Pathfinder Lunar Orbiter (KPLO) in the Earth-Moon Transfer phase was investigated. For the OD, we employed a sequential estimation using the extended Kalman filter and a fixed-point smoother. The mission periods, comprised between the perigee maneuvers (PM) and the lunar orbit insertion (LOI) maneuver in a 3.5 phasing loop of the KPLO, was the primary target. The total period was divided into three phases: launch-PM1, PM1-PM3, and PM3-LOI. The Doppler and range data obtained from three tracking stations [included in the deep space network (DSN) and Korea Deep Space Antenna (KDSA)] were utilized for the OD. Six arc-length cases (24 hrs, 48 hrs, 60 hrs, 3 days, 4 days, and 5 days) were considered for the arc-length effect investigation. In order to evaluate the OD accuracy, we analyzed the position uncertainties, the precision of orbit overlaps, and the position differences between true and estimated trajectories. The maximum performance of 3-day OD approach was observed in the case of stable flight dynamics operations and robust navigation capability. This study provides a guideline for the flight dynamics operations of the KPLO in the trans-lunar phase.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.229-232
• /
• 2007

This paper investigates on the use of constant-amplitude zero-autocorrelation (CAZAC) sequence for channel estimation in multiple-input multiple-output (MIMO) system over indoor wireless channel. Since the symbol-length of the conventional 4-phase CAZAC sequence is short, there is a limitation to use it for MIMO system in multipath environments. An algorithm which generates longer CAZAC sequences is proposed to overcome that problem. Flexible symbol-length of 4-phase CAZAC sequences can be made by the proposed algorithm. Therefore appropriate symbol-length of CAZAC sequences could be utilized as preambles in accordance with the number of transmit antennas and channel condition. The effect of the number of CAZAC sequences for channel estimation is presented in terms of mean square error (MSE).

• Journal of Ecology and Environment
• /
• v.32 no.1
• /
• pp.61-65
• /
• 2009

We compared two nondestructive methods for leaf area estimation using leaves of 16 common plant species classified into six types depending on leaf shape. Relatively good linear relationships between actual leaf area (LA) and leaf length (L), width (W), or the product of length and width (LW) were found for ordinary leaves with lanceolate, oblanceolate, linear and sagitttate shapes with entire margins, serrate margins, mixed margins with a entire form and shallow lobes, and ordinary incised margins. LA was better correlated with LW than L or W, with $R^2$ > 0.91. However, for deeply incised lobes, LA estimation using LW showed low correlation coefficient values, indicating low accuracy. On the other hand, a method using photographic paper showed a good correlation between estimates of area based on the mass of a cut-out leaf image on a photographic sheet (PW) and actual leaf area for all types of leaf shape. Thus, the PW method for LA estimation can be applied to all shapes of leaf with high accuracy. The PW method takes a little more time and has a higher cost than leaf estimation methods using LW based on leaf dimensions. These results indicate that researchers should choose their nondestructive LA estimation method according to their research goals.

• Anatomy and Cell Biology
• /
• v.55 no.2
• /
• pp.170-178
• /
• 2022

Stature estimation is an important process of biological profile analysis for the identification of skeletal remains. In forensic practice, non-long bones might be needed for estimating stature, in case long bones were not recovered or well preserved. This study developed the stature estimation model from dry sterna in a Thai population. The combined length of manubrium and mesosternum (CMM) was the best single stature estimation indicator for males and combined sex samples, whereas the sternal area (SA) was the best stature estimation indicator for females in our study. The best multiple regression analysis models of our study were stature equal 122.685+0.182 (CMM)+0.592 (intercostal length between the third and fourth ribs [ICL₃₄]) with a standard error of estimation (SEE) of 6.134 cm for males, stature equal 130.676+0.005 (SA) with SEE of 5.370 cm for females, and stature equal 79.412+0.342 (CMM)+0.506 (corpus sterni width at first sternebra [CSW_S1])+0.794 (ICL₃₄) with SEE of 6.222 cm for unknown sex samples. The results indicated that a sternum can be used for estimating the stature of skeletal remains in a Thai population. However, these models might not be suitable for other populations, especially, in case the suspected stature is over the stature range in our study.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.4
• /
• pp.295-308
• /
• 2018

In this study, orbit determination (OD) simulation for the Korea Pathfinder Lunar Orbiter (KPLO) was accomplished for investigation of the observational arc-length effect using a sequential estimation algorithm. A lunar polar orbit located at 100 km altitude and $90^{\circ}$ inclination was mainly considered for the KPLO mission operation phase. For measurement simulation and OD for KPLO, the Analytical Graphics Inc. Systems Tool Kit 11 and Orbit Determination Tool Kit 6 software were utilized. Three deep-space ground stations, including two deep space network (DSN) antennas and the Korea Deep Space Antenna, were configured for the OD simulation. To investigate the arc-length effect on OD, 60-hr, 48-hr, 24-hr, and 12-hr tracking data were prepared. Position uncertainty by error covariance and orbit overlap precision were used for OD performance evaluation. Additionally, orbit prediction (OP) accuracy was also assessed by the position difference between the estimated and true orbits. Finally, we concluded that the 48-hr-based OD strategy is suitable for effective flight dynamics operation of KPLO. This work suggests a useful guideline for the OD strategy of KPLO mission planning and operation during the nominal lunar orbits phase.

• Journal of the Korean Society of Costume
• /
• v.46
• /
• pp.159-170
• /
• 1999

This study was for reasonable gathering by a fabric and a skirt length. So the purpose of this study was to show the basic data to forecast the gathering effect of gathered skirt which was more aesthetical and suitable for a use in time of making pattern. To find the reasonable gathering amount by a length of gathered skirt and a fabric the methods of this study were divided on three types-five kinds of the gathering amounts three kinds of fabrics and three kinds of skirt ength-so forty five kinds of the samples were made. As the visual evaluation of the gathered skirt were practiced bgy these factors. The following are the results of this research. 1. For this research of fabrics the gathering amounts which were shown visually the most aesthetical silhouette in the same material and skirt length were decided on 1.5 times or 2.0 times. On the other side 0.5 times and 2.5 times of gathering amount were got a low estimation visually 2. Except in case the skirt length was 40cm and gathering amount were 1.0 times and 1.5 times in the same gathering amount and length of skirt it was estimated that wool fabric was most aesthetical silhouette fabric. On the other hand it was got low estimation which the cotton was not good for draping effect because it was got the lowest estimation level in all cases. 3. Considered as a whole in the same gathering amount and fabric the fabric widths for gathering which were shown the most aesthetical silhouette were estimated the length of 60cm in cotton fabric 80cm in polyester fabric and 40cm in wool fabric. Therefore as a fabric was weighty a length of a skirt was shorten so, it was estimated visually more beautiful.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.1946-1958
• /
• 2011

Wireless Sensor Network (WSN) is made up of a number of sensor nodes and base stations. Traffic flow in WSN appears self-similar due to its data delivery process, and this impacts queue length greatly and makes queuing delay worse. Active queue management can be designed to improve QoS performance for WSN. In this paper, we propose self-similar traffic rate estimating algorithm named Power-Law Moving Averaging (PLMA) to regulate packet marking probability. This algorithm improves the availability of the rate estimation algorithm under the self-similar traffic condition. Then, we propose an adaptive Proportional Integral algorithm (SSPI) based on the estimation of the Self-Similar traffic rate by PLMA. Simulation results show that SSPI can achieve lower queue length jitter and smaller setting time than PI.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.863-871
• /
• 2004

In this paper, we propose a subspace channel estimation technique for DS/CDMA DMB down link system, which can obtain reduction in numerical complexity by using of matched filtering outputs. The complexity reduction is considerable when the channel length is small and the system is moderately loaded. Previously proposed subspace-based blind channel estimation algorithm suffer from high numerical complexity for systems with large spreading gains. Although the proposed algerian suffers a slight performance loss, it becomes negligible for large observation length. Performance is evaluated through simulations and the derivation of the analytical MSE.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.672-677
• /
• 2010

The goal of this study is to simplify the measurement process of the flat zone length produced by a flexible disk grinding system for the process automation. The image of workpiece in the grinding process is obtained, and the cutting speed and the feeding speed are controlled carefully to maximize the flat zone length. The gradient, the inflection point and the length of the line in the image are calculated, and the length is also measured by using a projector. Processing conditions and inversely proportional to flat zone length was changing. The flat zone length is estimated by Neural network algorithm considering the process conditions with the estimated error range as 0.06~3.61%, the Neural network algorithm for the grinding process estimation is found to be useful for building the process automation database.