• 한국컴퓨터정보학회논문지
• /
• 제25권10호
• /
• pp.103-113
• /
• 2020

본 연구는 사이즈코리아의 제7차 인체치수조사 자료 중 16-18세 고등학교 남학생 데이터를 사용하여 맞음새가 우수한 교복 셔츠를 개발하기 위하여 상반신 관련 치수를 분석하여 상반신 체형을 분류하고 체형유형별 특성을 파악하고자 하였다. 이를 통해 교복셔츠 개발에 필요한 기초자료를 얻고자 하였다. 자료분석에는 SPSS Ver. 26.0 프로그램을 사용하였다. 고등학교 남학생은 높이항목은 연령별로 유의미한 차이가 없었으나 너비, 두께, 길이, 둘레, 어깨경사각, 몸무게 항목에서는 연령별로 유의미한 차이가 나타났다. 상반신 체형은 어깨길이가 길고 상반신 둘레와 너비가 작은 '긴 어깨 마른 체형', 상반신길이가 길고 상반신 둘레와 너비가 큰 '긴 상체 비만 체형', 어깨길이가 짧고 상반신 두께와 너비가 중간인 짧은 어깨 보통 체형, 어깨길이가 길고 둘레와 너비는 중간 정도인 '긴 어깨 보통 체형' 등 4개로 유형화되었다. 본 연구를 통해 추출된 사이즈 자료를 바탕으로 패턴 개발 및 사이즈 체계 구축을 통해 실질적인 맞음새가 우수한 교복 셔츠 개발이 필요할 것으로 생각된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.1-4
• /
• 2002

The numerical alaysis of optical device, silicabased device, are presented. The purpose of this paper is to simulate and to design a 8-channel optical wavelength division multiplexer(OWDM) based on Mach-Zehnder Interferometer(MZI) with wavelength spacing between channels Δλ=0.8 nm at central wavelength λ=1.55 ${\mu}{\textrm}{m}$. In initial condition fur simulating, we assumed as follows. A channel waveguide is made from silica based P-doped SiO2 core layers in order to coupling with a fiber easily and its core dimension was 6 ${\mu}{\textrm}{m}$$\times$6 ${\mu}{\textrm}{m}$. The core and clad index of channel waveguide were 1.455 and 1.444, separately, at λ=1.55 ${\mu}{\textrm}{m}$. Where, the separation between channel waveguides in coupling region was 3 ${\mu}{\textrm}{m}$. As a result of analysis, a group mode index of channel waveguide was 1.4498370, was gained by Hermite-Gaussian Method(HGM). Also, the channel spacing was determined by the waveguide arm length difference and was Δλ=0.8 nm as like a proposed condition. The central wavelength of a designed-multiplexer was activated about wavelength λ=1.55 ${\mu}{\textrm}{m}$, and we certificated that it can be used to 8-channel optical wavelength division multiplexer/demultiplexer.

• 한국정보통신학회논문지
• /
• 제20권6호
• /
• pp.1049-1056
• /
• 2016

본 논문에서는 접힌 슬롯이 추가된 소형 이중 대역 슬롯 안테나에 대한 설계 방법을 연구하였다. 제안된 슬롯 안테나는 이중 대역 동작을 위해 직사각형 슬롯에 접힌 슬롯이 추가되었다. 직사각형 슬롯은 내부에 직사각형 급전패치를 두어 동축케이블로 급전한다. 직사각형 슬롯의 위쪽 모서리에 접힌 슬롯이 대칭적으로 추가되면 슬롯의 길이가 증가하여 새로운 공진주파수가 낮은 주파수에서 발생한다. 2.45 GHz WLAN 대역과 5 GHz WLAN 대역을 포함하는 4.50-8.30 GHz 대역에서 동작하는 이중 대역 슬롯 안테나를 FR4 기판 상에 $30mm{\times}30mm$ 크기로 제작하였다. 실험 결과, 입력 반사계수 < -10 dB인 대역이 2.40-2.49 GHz, 4.33-9.85 GHz으로 원하는 이중대역에서 동작하는 것을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.152-152
• /
• 2016

We studied the effect of the silver grid size on graphene transparent conducting films for flexible organic solar cells (OSCs). The silver grid was used an assistant layer of the graphene to reduce the sheet resistance of substrates. Silver grid with various graphene sizes for optimizing transmittance and sheet resistance of substrates were fabricated on polyethylene terephthalate (PET) substrates to form the hybrid films. The optimized grid geometry on the single layer graphene (SLG) was the grid dimension $200{\mu}m{\times}200{\mu}m{\times}50nm{\times}2{\mu}m$ (length ${\times}$ width ${\times}$ height ${\times}$ linewidth), where the sheet resistance was $55.73{\Omega}/square$ with the average transmittance of ~ 92.83 % at 550 nm. The properties of the OSCs fabricated using SLG with optimized silver grids on PET substrates show a short circuit current of $10.9mA/cm^2$, an open circuit voltage of 0.58 V, a fill factor of 60.8 %, and a power conversion efficiency (PCE) of 3.9 %. The PCE was improved about 91% than that of the OSCs using the SLG without the silver grid. These results demonstrate that the optimized grid geometry to the based on the graphene transparent electrodes contribute to improving the performance of OSCs.

• Smart Structures and Systems
• /
• 제19권2호
• /
• pp.181-194
• /
• 2017

In order to investigate the interface debonding defects detection mechanism between steel tube and concrete core of concrete-filled steel tubes (CFSTs), multi-physical fields coupling finite element models constituted of a surface mounted Piezoceramic Lead Zirconate Titanate (PZT) actuator, an embedded PZT sensor and a circular cross section of CFST column are established. The stress wave initiation and propagation induced by the PZT actuator under sinusoidal and sweep frequency excitations are simulated with a two dimensional (2D) plain strain analysis and the difference of stress wave fields close to the interface debonding defect and within the cross section of the CFST members without and with debonding defects are compared in time domain. The linearity and stability of the embedded PZT response under sinusoidal signals with different frequencies and amplitudes are validated. The relationship between the amplitudes of stress wave and the measurement distances in a healthy CFST cross section is also studied. Meanwhile, the responses of PZT sensor under both sinusoidal and sweep frequency excitations are compared and the influence of debonding defect depth and length on the output voltage is also illustrated. The results show the output voltage signal amplitude and head wave arriving time are affected significantly by debonding defects. Moreover, the measurement of PZT sensor is sensitive to the initiation of interface debonding defects. Furthermore, wavelet packet analysis on the voltage signal under sweep frequency excitations is carried out and a normalized wavelet packet energy index (NWPEI) is defined to identify the interfacial debonding. The value of NWPEI attenuates with the increase in the dimension of debonding defects. The results help understand the debonding defects detection mechanism for circular CFST members with PZT technique.

• 한국통신학회논문지
• /
• 제40권9호
• /
• pp.1786-1792
• /
• 2015

랜덤 선형 네트워크 코딩(Random Linear Network Coding, RLNC)은 멀티캐스트의 신뢰성을 높이는 방법으로 널리 사용되고 있다. RLNC 구현에 있어서 효율적인 연산을 위해 Galois Field (GF)를 사용한다. 상용 컴퓨터에서의 연산을 고려하였을 때 GF($2^m$)의 크기 m이 32보다 작을 경우, 곱셈과 나눗셈에 대해 사전에 계산된 table을 사용하면 모든 사칙 연산이 m에 관계없이 상수 복잡도를 가진다. 이로부터 RLNC의 연산 복잡도는 m에 반비례하는 것을 보인다. 추가적으로, m이 커짐에 따라 발생하는 헤더 길이 증가, 메모리 사용량 증가 등의 추가적인 오버헤드를 고려하여 실용적인 GF의 크기를 선택한다. 이를 바탕으로 상용 컴퓨터에 RLNC를 구현하고 곱셈/나눗셈 연산 시에 사용되는 table의 종류와 한 번에 인코딩 되는 원본 패킷의 개수에 따른 성능을 실측한다.

• 한국지반신소재학회논문집
• /
• 제14권4호
• /
• pp.117-127
• /
• 2015

최근 사면 및 흙막이 벽체의 붕괴에 따른 안전사고가 빈번하게 발생함에 따라 보강토 옹벽 공법의 안정성이 사회적인 문제로 대두되고 있다. 본 연구는 모형벽체 시험기를 제작하여 지오그리드 길이와 보강 층수에 따른 주동파괴 시 흙막이 벽체와 지반의 거동특성을 분석하였다. 벽체 시험에 사용된 지오그리드는 각각 $30cm{\times}60cm$, $30cm{\times}70cm$, $30cm{\times}80cm$ (폭 ${\times}$ 길이)의 크기를 가지며, 일정한 깊이로 설치되었다. 모형벽체 시험은 2장의 동일한 길이의 지오그리드, 2장의 서로 다른 길이의 지오그리드, 4장의 동일한 길이의 지오그리드, 4장의 서로 다른 길이의 지오그리드 총 4가지 case로 나누어 모형시험을 진행하였다. 또한 유한요소 수치해석을 통해 보강방법에 따른 지반의 거동을 예측하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.131-131
• /
• 2009

Silicon Carbide (SiC) is a material with a wide bandgap (3.26eV), a high critical electric field (~2.3MV/cm), a and a high bulk electron mobility ($\sim900cm^2/Vs$). These electronic properties allow high breakdown voltage, high-speed switching capability, and high temperature operation compared to Si devices. Although various SiC DMOSFET structures have been reported so far for optimizing performances, the effect of channel dimension on the switching performance of SiC DMOSFETs has not been extensively examined. This paper studies different channel dimensons ($L_{CH}$ : $0.5{\mu}m$, $1\;{\mu}m$, $1.5\;{\mu}m$) and their effect on the the device transient characteristics. The key design parameters for SiC DMOSFETs have been optimized and a physics-based two-dimensional (2-D) mixed device and circuit simulator by Silvaco Inc. has been used to understand the relationship. with the switching characteristics. To investigate transient characteristic of the device, mixed-mode simulation has been performed, where the solution of the basic transport equations for the 2-D device structures is directly embedded into the solution procedure for the circuit equations. We observe an increase in the turn-on and turn-off time with increasing the channel length. The switching time in 4H-SiC DMOSFETs have been found to be seriously affected by the various intrinsic parasitic components, such as gate-source capacitance and channel resistance. The intrinsic parasitic components relate to the delay time required for the carrier transit from source to drain. Therefore, improvement of switching speed in 4H-SiC DMOSFETs is essential to reduce the gate-source capacitance and channel resistance.

• 대한치과교정학회지
• /
• 제47권1호
• /
• pp.11-20
• /
• 2017

Objective: This randomized controlled trial aimed to compare the stability of mandibular arch orthodontic treatment outcomes between passive self-ligating and conventional systems during 6 months of retention. Methods: Forty-seven orthodontic patients with mild to moderate crowding malocclusions not requiring extraction were recruited based on inclusion criteria. Patients (mean age $21.58{\pm}2.94years$) were randomized into two groups to receive either passive self-ligating ($Damon^{(R)}$ 3MX, n = 23) or conventional system (Gemini MBT, n = 24) orthodontic treatment. Direct measurements of the final sample comprising 20 study models per group were performed using a digital caliper at the debonding stage, and 1 month, 3 months, and 6 months after debonding. Paired t-test, independent t-test, and non-parametric test were used for statistical analysis. Results: A significant increase (p < 0.01) in incisor irregularity was observed in both self-ligating and conventional system groups. A significant reduction (p < 0.01) in second interpremolar width was observed in both groups. Mandibular arch length decreased significantly (p = 0.001) in the conventional system group but not in the self-ligating system group. A similar pattern of stability was observed for intercanine width, first interpremolar width, intermolar width, and arch depth throughout the 6-month retention period after debonding. Comparison of incisor irregularity and arch dimension changes between self-ligating system and conventional system groups during the 6 months were non-significant. Conclusions: The stability of treatment outcomes for mild to moderate crowding malocclusions was similar between the self-ligating system and conventional system during the first 6 months of retention.

• 치과방사선
• /
• 제8권1호
• /
• pp.49-61
• /
• 1978

A study was made to investigate a relationship existing in the dentoskeletal framework and the soft tissue profile around the face, and compare the sexual differences between boys and girls having the normal occlusion in the mixed dentition. The lateral cephalograms were composed of 67 boys aged 10.3 years and 68 girls aged 10.4 years, respectively. By means of the lateral cephalograms, both the hard-and soft tissue structures were simultaneously analyzed, measured and evaluated by introducing the several reference items: S-N plane, palatal plane, mandibular plane, N-A line and A-P line for the dentoskeletal structures and N’-P’line for the soft tissue, and the 21 measuring points for the both structures. The significant findings were as follows: 1. In general the boys showed the larger nasal component dimension than did the girls, but the length and height of nose(N’-Prn and NA-Prn) showed the significant sexual difference among those when evaluated statistically. 2. The lip-thickness was found to be minimal in the region of nasion, greater in the region of pogonion, and much greater in the region of point A in the both sexes, but the only thickness over point A(A-A’) showed the significant sexual difference statistically. 3. The upper and lower lip position were found to be located anteriorly to the esthetic line in the both sexes, but upper lip position showed the significant sexual difference when evaluated statistically. 4. The regions of nose and upper lip had a tendency not to be following the underlying skeletal profile.