• 대한인간공학회지
• /
• 제23권3호
• /
• pp.25-38
• /
• 2004

Selection of a key dimension (s) by considering the characteristics of hand dimensions is needed to design gloves and construct a sound sizing system for gloves The present study identified key dimensions of glove design by analyzing the relationships between hand dimensions and demonstrated the construction process of a glove sizing system. By conducting correlation and regression analyses on 70 hand dimensions including 3 key dimension candidates (hand length; hand circumference; hand breadth) with the 1988 US Army data, hand length and hand circumference were selected as key dimensions for glove design. Glove sizing systems were constructed for males and females by applying the selected key dimensions, 0.5 inch of sizing intervals, and 2％ of presence rate criterion to the US Army data. This study suggests that glove sizing systems for males and females be very different from each other and a glove sizing system for males include more sizes than that for females.

• 한국농촌건축학회논문집
• /
• 제14권4호
• /
• pp.135-142
• /
• 2012

This study is aimed to investigate the dimension feature of the plane about the economic type farming village Korean-style house progressed in the Chonnam province and Longitudinal feature and tries to reveal this feature through the comparing analysis with the traditional house positioned in the Chonnam province. This result is as follows. First, the main feature in plane is the setting up the column interval in front when comparing the house of Happy Village and traditional house. In case house of the Happy Village, after firstly fixed the limited scales, sizes are determined, this is due to control the set up in the post interval in this in range. Second, in the case of the traditional houses, 0.68 ratio of the building height about the side length and 0.19 ratio of the eaves extrusion about the side length are consistent ratio about dimensions. However, there is no consistent ratio or fixed law, the various dimensions show up in case of the house of Happy Village. It will be inevitable that space of the post increases for the convenience of life of the modern people. However, it has to sublate and to disregard as the identity of the morphological shown up in the Korean-style house the more various construction standards will need to be presented.

• Tribology and Lubricants
• /
• 제33권6호
• /
• pp.303-308
• /
• 2017

Most automobile tire companies have not yet considered the geometric information of a road at the design stage of a tire because the topographical characterization of a road surface is very difficult owing to its vastness and randomness. A road surface shows variable surface roughness values according to magnification, and thus, the contact force between the road and tire significantly fluctuates with respect to the scale. In this study, we make an attempt to define a representative value for surface topographical information at multi-scale levels. To represent surface topography, we use a statistical method called power spectral density (PSD). We use the fast Fourier transform (FFT) and PSD to analyze the height profiles of a random surface. The FFT and PSD of a surface help in obtaining a fractal dimension, which is a representative value of surface topography at all length scales. We develop three surfaces with different fractal dimensions. We use finite element analysis (FEA) to observe the contact forces between a tire and the road surfaces with three different fractal dimensions. The results from FEA reveal that an increase in the fractal dimension decreases the contact length between the tire and road surfaces. On the contrary, the average contact force increases. This result indicates that designing and manufacturing a tire considering the fractal dimension of a road makes safe driving possible, owing to the improvement in service life and braking performance of the tire.

• 대한치과교정학회지
• /
• 제27권3호
• /
• pp.457-471
• /
• 1997

본 연구는 치열궁 길이 부조화(Arch length discrepancy : 이하 ALD)의 원인요소간의 상대적 중요성과 혼합치열기에서의 예측가능성을 알아보고자 시행되었다. Angle씨 I급 대구치관계이며 근기능 이상이나 골격형태의 이상이 없다고 판단되는 142명의 진단모형을 이용하여 성별과 ALD의 양에 따라 여섯군으로 나누어 각 치아의 크기와 치열궁 각 부위의 크기를 계측하였다. SPSS통계처리 프로그램을 이용하여 각군의 평균, 표준편차를 구하고 Student t-test, 상관관계 분석, 요인분석, 다중회귀분석을 실시하였으며 혼합치열기에서 얻을 수 있는 자료들을 이용한 ALD의 예측가능성을 평가하여 다음과 같은 결과를 얻었다. 1. 성별에 따른 차이는 정상군에서는 거의 보이지 않았으며 spacing군은 대부분의 계측치에서, crowding군은 몇가지 치열궁의 크기에 관한 계측치에서 유의한 차이를 보였다. 2. 남자crowding군과 여자 spacing군은 해당 정상군에 비해 주로 치아크기에 관한 계측치에서 유의한 차이를 보였다. 3. 남자 spacing군과 여자crowding군은 해당 정상군에 비해 치열궁의 크기에 관한 계측치에서 유의한 차이를 보였다. 4. 상관관계분석과 요인분석결과에서는 주로 치열궁의 크기에 관한 계측치들이 ALD와 큰 연관성을 나타내었다. 5. 혼합치열기에서 얻을 수 있는 정보인 중절치, 측절치, 제1대구치의 폭경과 제1대구치간 폭경, 치열궁 장경 을 이용한 ALD의 다중회귀분석은 최소 $63\%$에서 최대 $80\%$의 예측도(R square)를 보였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.505-508
• /
• 2006

Self-heating induced device degradation and its width/length (W/L) dimension dependence were studied in p-type polycrystalline silicon (poly-Si) thin film transistors (TFTs). Negative channel conductance was observed under high power region of output curve, which was mainly caused by hole trapping into gate oxide and also by trap state generation by self-heating effect. Self-heating effect became aggravated as W/L ratio was increased, which was understood by the differences in heat dissipation capability. By reducing applied power density normalized to TFT area, self-heating induced degradation could be reduced.

• 화약ㆍ발파
• /
• 제22권4호
• /
• pp.1-6
• /
• 2004

본 연구에서는 발파해체에 대한 축소모형실험의 폭원에 대한 차원과 축소율을 산정하고, 이로부터 축소모형실험의 적정 길이의 축소율을 고찰하였다. 그 결과 길이 축소비를 1/4로 할 때 축원의 축소율은 1/256로 모형실험과 실제 구조물에서 사용한 화약량의 비로 구한 축소율과 유사한 값을 보였다. 길이 축소율은 1/4 이상으로 하는 것이 바람직하다고 판단된다

• Industrial Engineering and Management Systems
• /
• 제9권1호
• /
• pp.20-27
• /
• 2010

The purpose of this study was to compare the consistency of external ear measurements obtained by electronic digital caliper, photocopier scanning and digital photographic methods. Photogrammetric measurements were made after image editing software was used to optimize the brightness, contrast, size and image clarity. The CorelDRAW dimension tool was used to create a dimension line that measured the vertical and horizontal length between any two landmarks. Results of repeated measures analysis of variance revealed no significant differences in length and width of the pinna between the three methods. The reliability of the three measurement techniques showed a high degree of consistency. Further study and efforts could be extended to measurement hands, foots and facial dimensions by present techniques.

• 대한건축학회논문집:계획계
• /
• 제34권8호
• /
• pp.95-104
• /
• 2018

This thesis aims to determine the size of the rear garden and its architectural dimension at Gyeongbok Palace constructed during King Gojong's reign by analyzing Bukgyeol dohyeong(Site plan of Gyeongbok Palace) and Bukgyeol huwon dohyeong(Site plan of Rear Garden of Gyeongbok Palace) applied of scale unit and made from 1905 untill 1909. The results of this study were as follows; With respect to its site, the maximum horizontal length is estimated to be around 448m, the maximum vertical length is around 544m, and the entire area is around $203,905m^2$. Concerning the architecture, the total number of the buildings made up of one or more gan(間) is 32 and the total number of its gan is 292.5, etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1588-1590
• /
• 1996

The fractal characteristics of AC electrical tree grown in DGEBA/MDA/ SN/HQ system was investigated. As the applied voltage decreased, tree initiated after retardation. All the trees were fractals in spite of tile applied voltage. Fractal dimension increased with tree length. When the tree grew slowly, the fractal dimension or tile degree of treeing deterioration increased.

• 충청수학회지
• /
• 제23권4호
• /
• pp.657-661
• /
• 2010

We study a singular function which we call a generalized cylinder convex(concave) function induced from different generalized dyadic expansion systems on the unit interval. We show that the generalized cylinder convex(concave)function is a singular function and the length of its graph is 2. Using a local dimension set in the unit interval, we give some characterization of the distribution set using its derivative, which leads to that this singular function is nowhere differentiable in the sense of topological magnitude.