• Journal of the Korean Institute of Navigation
• /
• v.16 no.3
• /
• pp.77-85
• /
• 1992

Camera arrangement for depth and image correspondence is very important to the computer vision. Two conventional comera arrangements for stereo computer vision are lateral model and axial motion model. In this paper, using the axial motion stereo camera model, the algorithm for camera focal length measurement and the surface smoothness with the radiance-irradiance is proposed fro 3-dimensional image correspondence on stereo computer vision. By adapting the above algorithm, camera focal length can be measured precisely and the resolution of 3-dimensional image correspondence has been improved comparing to that of the axial motion model without the radiance-irradiance relation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.83-88
• /
• 2016

The use of consistent coastlines is an important element for the systematic management of maritime boundaries and the interests of local governments. The Hydrographic and Oceanographic Agency conducted a preliminary survey for consistent coastline production, since 2001. As a result, the length of coastline was different by year. Because of the lack of systematic management, the use of incorrect data, etc. We also changed the coastline on the sea chart to show on a digital map for realization of terrain expression method. However, there was a variation in shoreline length due to various surveying techniques and shoreline extraction methods. In this paper, the characteristics of Jeju-do coastline were analysed by using a modified divider method of fractal dimension. The accuracy of the vectorization was determined by converting the actual distance in the Public Survey Amendment for proper divider use. With 1:5,000 and 1:25,000 digital maps of Jeju-si and Seogwipo-si each fractal dimensions were calculated. Jeju-si=1.14 and Seogwipo-si=1.12 in 1: 5,000. Jeju-si=1.13 and Seogwipo-si=1.10 in 1: 25,000. Calculated fractal dimension were correlated to data from digital maps. It was considered that complexity and scale of coastlines affected. In the future coastline length statistics and minimum ratio of calculated coastline length to original length need to be determined for consistency of coastline length statistics.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.182-188
• /
• 2019

A proper vertical dimension and a harmonious occlusal plane are essential to satisfy a patient esthetically and functionally. A maxillomandibular occlusal vertical dimension is determined by the elevators which repeatedly contracts to a certain length, and a tooth location is determined by a maxillomandibular vertical dimension. The patient of this case came in with the incongruity of the lips and the occlusal plane. The result of clinical test showed the lack of length of the lower anterior due to the reduction of vertical dimension, the deep overbite of anterior, the excessive attrition of anterior, and the incongruity of occlusal plane. After the diagnostic wax-up, the temporary restoration was installed, and final prosthesis was installed after 6 months. As a result, the patient obtained a functionally and esthetically satisfying result.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.2
• /
• pp.37-42
• /
• 2016

This paper proposes a method to develop a high-precision dimension measurement system using a linear variable differential transformer sensor. The Dimension targets for measurement is carbon material vanes of key element in the rotating parts within vehicle circulating pump. Data acquisition system for dimension measurement is designed using the NI Compact RIO. And the program applying the dimension measurement algorithm is built using NI LabVIEW. The dimension measuring program is composed of a FPGA program, Real Time program and Host program. The method of the experiment compares master vane with target vane for measure the length of the carbon material vane. The experimental results confirmed the usefulness of the accuracy within ${\pm}4um$.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.91-109
• /
• 2006

This study aims at strengthening the national competitiveness of Korea's clothing industry as it provides substantial information on the human body proportion and proportional dimension standards for Chinese women and improves the fitness of clothing, considering human proportion in the production of clothing products for export to China. This study selected by simple random sampling Chinese women in Beijing and Shanghai, China, whose age is between 19-50 from June 23 to August 7, 2004. The stature of the average Chinese woman belonging to the High Frequency group is 7.09 times as long as the length of the head. We developed the body proportional dimension standards with the same proportion with High-Frequence group. The basic size of proportional dimension standards for Chinese women has the stature of 159cm, (chest circumference)/2 of 42.8cm.

• The Journal of Engineering Geology
• /
• v.15 no.3
• /
• pp.269-280
• /
• 2005

We assigned points on surface of standard roughness profile by 0.1mm along the length and measured coordinates of points. Then, the lengths of profile were measured with different scales using modified divider method. The fractal dimensions and intercepts of slopes were determined by plotting the length vs scale in log-log scale. The fractal dimensions as well as intercepts of slopes show well correlation with joint roughness coefficients(JRC). However, multiplication of the kactal dimension by intercept show better correlation with IRC and we derived a new equation to estimate JRC from fractal dimension and intercept. The crossover length in which we can determine the correct fractal dimension was between 0.3-3.2mm. We measured joint roughness of 26 natural joints and calculated JRC using the equation suggested by Tse and Cruden(1979) and new equation derived by us. IRC values calculated by both equations are almost the same, indicating new equation is effective in measuring IRC.

• Journal of Veterinary Clinics
• /
• v.23 no.4
• /
• pp.437-441
• /
• 2006

Renal length, width, and ratio to the length of the second lumbar vertebrae body were assessed on survey radiographs and excretory urograms in 50 Korean domestic cats. Renal dimensions on plain radiographs were: right kidney length $4.31{\pm}0.50cm\;(mean{\pm}SD)$, right kidney width $3.10{\pm}0.36cm$, left kidney length $4.17{\pm}0.48cm$, left kidney width $3.03{\pm}0.34cm$, right kidney length ratio $2.37{\pm}0.21$, right kidney width ratio $1.71{\pm}0.15$, left kidney length ratio $2.30{\pm}0.20$, and left kidney width ratio $1.38{\pm}0.08$, respectively. Renal dimensions on excretory urograms were: right kidney length $4.56{\pm}0.53cm$, right kidney width $3.29{\pm}0.37cm$, left kidney length $4.43{\pm}0.47cm$, left kidney width $3.22{\pm}0.33cm$, right kidney length ratio $2.51{\pm}0.22$, right kidney width ratio $1.81{\pm}0.17$, left kidney length ratio $2.45{\pm}0.20$, and left kidney width ratio $1.78{\pm}0.16$, respectively. There were significant difference in renal size and renal dimension ratio measured from contrast studies compared with survey radiographs (P<0.05). There were also significant difference in renal size and renal length ratio between right and left kidneys (p<0.05).

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.145-155
• /
• 2015

Fiber morphology and basic characteristics of Legi bamboos (Gigantochloa atter) growing on Yogyakarta were studied considering their age and height positions in the culms. Culms of 4, 16, and 40 months were harvested, and their total lengths were measured. The length, diameter, and wall thickness of each internode were measured. All the sample culms were divided into three different parts along the height, and their fiber dimension and physical properties were observed. The data obtained were analyzed by analysis of variance. The results showed that the culms had a diameter of 5.8 to 10.8 cm. The lowest internodes always showed the shortest length and the thickest wall. The culms had an average fiber length of 2.41 mm and Runkel ratio of 0.61. Fiber length was affected by the height, while fiber diameter, lumen diameter, and fiber wall thickness were affected significantly by the age of the culms. The culms had high green moisture content (GMC) of 157.89%, and basic density (BD) of $456.67kg.m^{-3}$, a total longitudinal shrinkage of 0.35%, and relatively low R/T shrinkage ratio. The interactions between age and height were affected GMC and BD.

• Phonetics and Speech Sciences
• /
• v.7 no.4
• /
• pp.3-8
• /
• 2015

In this paper, we investigate an input dimension reduction method using continuous word vector in deep neural network language model. In the proposed method, continuous word vectors were generated by using Google's Word2Vec from a large training corpus to satisfy distributional hypothesis. 1-of-${\left|V\right|}$ coding discrete word vectors were replaced with their corresponding continuous word vectors. In our implementation, the input dimension was successfully reduced from 20,000 to 600 when a tri-gram language model is used with a vocabulary of 20,000 words. The total amount of time in training was reduced from 30 days to 14 days for Wall Street Journal training corpus (corpus length: 37M words).

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.38-44
• /
• 2002

The application of fractal concept provides an useful method in the study for the quantitative analysis of irregular variations like the fracture surfaces and crack profiles. Fractal curves have characteristics that represents a self-similarity based on the fractal dimension. The fractal dimensions were obtained by the box counting method. In this report, we obtained the nearly stable fractal dimensions of fracture crack profiles for STS316 with CT specimen as the crack advances and the relationships between crack length and fractal dimension. Moreover fractal fracture parameter that corresponds to J-R curve is shown by the relationships between fractal dimension and crack extension. From the results, we concluded that crack extension of high toughness material also shows the fractal characteristics, which can be used in order to evaluate the crack life precisely.