• Journal of muscle and joint health
• /
• v.24 no.3
• /
• pp.217-226
• /
• 2017

Purpose: The aim of this study was to identify the effects of Tai Chi training program on physical fitness, stress response and ego-resiliency in nursing students. Methods: 28 nursing students of D metropolitan city participated in non-equivalent control group pre- and post-test group test in quasi experimental design with written consent. Fourteen participants in the control group who did usual activities and 14 experimental participants who promised to participate 24 Tai Chi training sessions for 12 weeks. Both groups completed pre- and post-test measurement for physical fitness, a questionnaire regarding their stress response and ego-resiliency. Each 60-minute Tai Chi session was consisted of 5-minute warm up, 10-minute meditation, 40-minute Tai Chi, and 5-minute finishing exercise. Results: After 12 weeks, participants in the Tai Chi group reported significantly higher score in muscle endurance (t=3.77, p=.001), leg muscular strength (t=2.14, p=.042), and balance (t=2.12, p=.044) compared to the control group. The Tai Chi group recorded significantly lower score than the control group on stress response (t=2.75, p=.011). Conclusion: The findings highlight the importance of Tai Chi for a reduction in stress response and promotion in physical fitness in nursing students. Applying Tai Chi training to nursing program will help nursing students to have better academic performance.

• Korean Journal of Adult Nursing
• /
• v.24 no.3
• /
• pp.317-326
• /
• 2012

Purpose: The purpose of this study was to identify the effects of an exercise program on muscle strength, Activities of Daily Living (ADL), health perception, and depression among post-stroke elders. Methods: Nonequivalent control group design with pretest and posttest was used. A total of 23 post-stroke elders who met inclusion criteria were recruited. Muscle strength in upper and lower extremities, ADL, health perception, and self-rated symptoms of depression were measured. The exercise program consisted of deep breathing, range of motion, and muscle strengthening exercises using Thera-band, 30~40 min/day, three days a week, for 12 weeks. Results: Muscle strength of right shoulder (U=11.50, p=.001), right leg (U=13.50, p=.002), and health perception (U=24.00, p=.010) in the experimental group was significantly higher compared to the control group at 12 weeks of post-intervention. Depression scores were significantly lower in the experimental group compared to the control group at 6 weeks (U=28.00, p=.021), at 12 weeks (U=22.00, p=.006) of an exercise program. Conclusion: By applying this program, post-stroke elders showed increases in muscle strength and a decrease in depression as well as improvement of health perception. Further study is needed to verify the effects of the exercise program on cardiovascular physiologic variables through long-term follow-up.

• Physical Therapy Rehabilitation Science
• /
• v.5 no.1
• /
• pp.1-8
• /
• 2016

Objective: The present study was to investigate the discrimination capacity of the Performance Oriented Mobility Assessment-Gait Scale (POMA-GS), for predicting falls in stroke survivors. Design: Retrospective cohort study. Methods: Data including the characteristics and number of falls of 52 chronic stroke patients from a rehabilitation center were collected. The number of falls each subject had experienced in the previous year were investigated through interviews. The subjects were divided into two groups depending on the number of falls: if falls occurred twice or more on the basis of the time of study after stroke, they were defined as the falls group and if there was no fall experience or one fall, they were defined as the non-falls group. The subjects were examined with the POMA-GS, and physical functions were examined using by the One Leg Stand Test (OLST), Sit to Stand Test (SST), 10-m Walk Test, Lower Extremity in Fugl-Meyer assessment (FM-LE), and Trunk Impairment Scale (TIS). The validity of POMA-GS for falls prediction was analyzed. Results: In the POMA-GS, which predicts falls in stroke survivors, the cut-off value was 8.5 (sensitivity 72%; specificity 65%) and the area under the curve was 0.75 (95% confidence interval: 0.60-0.90, p<0.007). There was a significant difference in the OLST, SST, FM-LE, and TIS between the subjects with POMA-GS >8.5 and the subjects with POMA-GS ${\leq}8.5$. Conclusions: The POMA-GS could be a useful tool in predicting falls in stroke survivors, as its discrimination capacity and predictive validity is proven satisfactory.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.735-744
• /
• 2012

In order to quantify the flow distribution characteristics of APR+ reactor, a test was performed on a test facility, ACOP ($\underline{A}$PR+ $\underline{C}$ore Flow & $\underline{P}$ressure Test Facility), having a length scale of 1/5 referring to the prototype plant. The major parameters are core inlet flow and outlet pressure distribution and sectional pressure drops along the major flow path inside reactor vessel. To preserve the flow characteristics of prototype plant, the test facility was designed based on a preservation of major flow path geometry. An Euler number is considered as primary dimensionless parameter, which is conserved with a 1/40.9 of Reynolds number scaling ratio. ACOP simplifies each fuel assembly into a hydraulic simulator having the same axial flow resistance and lateral cross flow characteristics. In order to supply boundary condition to estimate thermal margins of the reactor, the distribution of inlet core flow and core exit pressure were measured in each of 257 fuel assembly simulators. In total, 584 points of static pressure and differential pressures were measured with a limited number of differential pressure transmitters by developing a sequential operation system of valves. In the current study, reactor flow characteristics under the balanced four-cold leg flow conditions at each of the cold legs were quantified, which is a part of the test matrix composing the APR+ flow distribution test program. The final identification of the reactor flow distribution was obtained by ensemble averaging 15 independent test data. The details of the design of the test facility, experiment, and data analysis are included in the current paper.

• Fashion & Textile Research Journal
• /
• v.11 no.2
• /
• pp.286-292
• /
• 2009

The purpose of this study is to analyze the pattern of the present flight suit, to select variables of human body and key dimensions for making pattern of the flight suit, and to decide the most appropriate size of human body and rate of ease for designing an overall flight suit. For analyzing the pattern of flight suit, we used "M95Special" (men ; chest circumference 92-97 cm ; height : above 177 cm), which was indicated as the standard of the Ministry of National Defense. We analyzed general appearance and the actual dimensions of the pattern of the flight suit. As a result of analyzing the pattern, flight suit was front-opened overall style which had a flat collar with rounded edges, two-pieced sleeves with lower height of the sleeve's cap, 3cm-width belt on the waist and 8 pockets. To decide the most appropriate size of human body, we selected 20 variables of human body in the 359 variables of the Size Korea by referring the previous studies. The 20 variables of human body were 9 circumferences (chest, waist, hip, neck, armscye, wrist, thigh, knee, and ankle), 9 lengths (stature, back interscye fold, waist back, crotch height, crotch, body rise, arm, outside leg and total), and 2 breadths (biacromial and chest). We drew out the size of 20 variables from the Size Korea and US Army anthropometry data and decided the most appropriate values from the drawn data for applying to the pattern of flight suit.

• Steel and Composite Structures
• /
• v.35 no.3
• /
• pp.305-325
• /
• 2020

Beams of steel frame-tube structures (SFTSs) typically have span-to-depth ratios of less than five. This makes a flexural beam unsuitable for such an application because the plastic hinges at the beam-ends cannot be adequately developed. This leads to lower ductility and energy dissipation capacities of SFTSs. To address this, SFTSs with bolted web-connected replaceable shear links (SFTS-BWSLs) are proposed. In this structural system, a web-connected replaceable shear link with a back-to-back double channel section is placed at the mid-length of the deep beam to act as a ductile fuse. This allows energy from earthquakes to be dissipated through link shear deformation. SFTS and SFTS-BWSL buildings were examined in this study. Several sub-structures were selected from each designed building and finite element models were established to study their respective hysteretic performance. The seismic behavior of each designed building was observed through static and dynamic analyses. The results indicate that the SFTS-BWSL and SFTS have similar initial lateral stiffness and shear leg properties. The SFTS-BWSL had lower strength, but higher ductility and energy dissipation capacities. Compared to the SFTS, the SFTS-BWSL had lower interstory drift, base shear force, and story shear force during earthquakes. This design approach could concentrate plasticity on the shear link while maintaining the residual interstory drift at less than 0.5%. The SFTS-BWSL is a reliable resistant system that can be repaired by replacing shear links damaged due to earthquakes.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.3
• /
• pp.110-117
• /
• 2018

The development of prosthetic hand or prosthetic leg equipment is steadily taking place globally. Though it would be difficult to create or feel the same way as a human hand, it would be a great for the amputated person if they can pick things up or do some movement as they want. It has become possible to develop low-cost prosthetic hand according to development of 3D printing technology. If people can develop personalized prosthetic equipment at similar prices to meet this trend, the utilization and penetration rate will be much higher. In this study, it describes how to develop a user-customizable prosthetic hand using 3D printing. To do this, the transformational parameters of prosthetic hand shape modeling are extracted as variability values, and the functions for controlling prosthetic hand motion are designed as software design patterns. This allows people who need a prosthetic hand to have their own prosthetic hand at a fast and affordable price.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.3 s.35
• /
• pp.208-215
• /
• 1990

The purpose of this study is to provide the fundamental data of a dummy design for more suitable ready made clothing by making a pattern of somatic types and analyzing their morphological characteristics in accordance with different pattern of somatic types. The side view silhouettes of 90 junior high school girls of age $13\~16$ in seoul urban area were measured by means of the plan photographing and the low data were examined by principal component analysis, while the principal component analysis was applied and three components were extracted and then interpreted to explain to variation of the form of the body. Using three components respectively the cluster analysis was carried out and the subject classified into 4 cluster The following outcomes are obtained. . The results of principal component analysis of this study would be turned out the three; 1) The first principal component shows the degree of erectness or stoop of the figure. 2) The second principal component was a stature length or a growth rate. 3) The third principal component was the obesity component. 2. The results of cluster analysis by using three principal component analysis would be turned out the four cluser; 1) Cluster 1 ($29\%$ of the total) is characterized with lower stature. 2) Cluster 2 ($21\%$ of the total) is characterized with backward somatotype, and the highest leg. 3) Cluster 3 ($23\%$ of the total) is thicked back of neck. 4) Cluster 4 ($27\%$ of the total) is characterized with forward somatotype, and highest stature, height.

• Korean Journal of Poultry Science
• /
• v.43 no.3
• /
• pp.169-176
• /
• 2016

An experiment was conducted to evaluate the growth performance and meat quality traits of broilers fed a diet supplemented with dry-ground curry leaves (Murraya koenigii). A total of 750 one-day-old broiler chicks (Cobbs 500) were arranged in the experiment with a completely randomized design and allotted to one of five treatments, with $T_1-Control$ and $T_2-T_5$ curry leaves powder levels (i.e., 0.3%, 0.6%, 0.9% and 1.2%, respectively). The initial body weights, final body weights and daily feed intake were measured over an experimental period of 32 days. At the conclusion of the experiment, the carcass weights and meat quality parameters were measured. The birds fed diets supplemented with curry leaves powder had a higher weight gain (P<0.05; ADG), improved feed conversion ratio (P<0.05; FCR) and lower mortality (P<0.05) rates compared to the birds in the control group. Nonetheless, there was no difference (P>0.05) in feed intake among the dietary treatments. Similarly, supplementation of curry leaves powder had no effect (P>0.05) on the proportions of the carcass, leg meat and drumstick. No differences were (P>0.05) observed in cooking loss or the pH of meat from broilers fed the curry leaves supplemented diet. However, curry leaf supplementation affected (P<0.05) the meat water holding capacity. A sensory evaluation showed higher levels of taste and tenderness in meat from broilers fed with curry leaves powder. In conclusion, our results suggested that curry leaves powder improved the growth performance of broilers, with a lower incidence of mortality and improvement of some meat qualities.

• Journal of Fashion Business
• /
• v.12 no.2
• /
• pp.117-133
• /
• 2008

In this research, female adults in ages 25 to 34 that reside in Shanghai, China, have been polled from 29th of December, 2007 to 2nd of February, 2008 in accordance with simple random sampling method. 210 women have been selected and polled. Of these, 10 who responded in appropriately were excluded and the remaining 200 were used in the final analysis. The questionnaires used in this poll were made up of ones that are about how they wear tailored suits and how much they are satisfied with them, and questions about demographical characteristics. SPSSWIN 12.0 Program was used as the analysis method in getting statistics and descriptive statistical analysis, t-test, and $x^2$ analysis have been performed. The summary about the Chinese female adults is as follows: 1. They prefer jackets with design, style, and quality that better fit them to the ones with a name brand and a lower price. 2. They prefer shoulder princess style jackets with short lapel color lengths and slacks with a basic style in waistline. 3. When wearing jackets they feel uncomfortable in all regions and were not satisfied. 4. All responded that they have an experience of having the jackets mended after purchasing them and a high frequency of mending was shown along the waistline, hips, and leg lengths.