• 한국광학회지
• /
• 제30권4호
• /
• pp.133-141
• /
• 2019

기본상수를 이용한 국제단위계 개정이 2018년 11월에 개최된 제26차 국제도량형총회에서 채택되었다. 국제단위계에 속한 4개의 기본단위(킬로그램, 암페어, 켈빈, 몰)가 각각 그 값이 고정된 플랑크 상수 h, 기본 전하 e, 볼츠만 상수 k, 아보가드로 상수 $N_A$를 기반으로 재정의되었다. 이 논문에서는 키블 저울을 이용하여 플랑크 상수로부터 킬로그램을 재정의한 원리를 설명한다. 개정된 국제단위계는 2019년 5월 20일부터 발효된다.

• 한국환경과학회지
• /
• 제13권2호
• /
• pp.149-159
• /
• 2004

In the removal of heavy metals from the mine deposit using electrokinetic processes, the effects of operation under both constant current and constant potential conditions were estimated. The results of soil pH distributions for DDW-20 V and DDW-100 mA cases after the electrokinetic remediation tests were observed. In the former case, soil pH was not much changed and kept to almost constant value just little higher than initial soil pH of 3.52, except near the cathode, which was about pH 5. While in the latter case, soil pHs of anode and the cathode regions were less than pH 3 and about 6, respectively. The electroosmotic flow to the cathode increased rapidly till 10 hrs and decreased steadily and then maintained to constant rate until the end of operation at constant current condition. Electric potential gradient was continuously increased to as much as 34.375 V/cm. At the steady state, values of the apparent electric conductivity for DDW-20 V and DDW-100 mA were around 40 ${\mu}\textrm{s}$/cm and 30 ${\mu}\textrm{s}$/cm, respectively. In the DDW-100mA test, Cu, Cd, and Zn except Pb showed the tendency of moving toward the cathode. While in the DDW-20 V case, it was observed that Cu, Zn, and Pb except Cd were not moved to any directions. The results of the tests demonstrated that the electrokinetic soil remediation process could be operated better under constant current condition than constant electric potential condition.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제56권4호
• /
• pp.387-405
• /
• 2017

The purpose of this study is to investigate the change of students 'perception and expression about the motion of object following distance function $={x \atop 3}$ and distance function $y=\frac{x^3}{3}+3$ according to the necessity of research on students' perception and expression about integral constant. In this paper, we present the recognition and the expression of the difference of the constant in the relationship between the distance function and the speed function of the students, while examining the process of constructing the speed function and the inverse process of the distance function. This provides implications for the relationship between the derivative and the indefinite integral corresponding to the inverse process. In particular, in a teaching experiment, a constructive activity was performed to analyze the motion of two distance functions, where the student had a difference of the constant term. At this time, the students used the expression 'starting point' for the constants in the distance function, and the motion was interpreted by using the meaning. This can be seen as a unique 'students' mathematics' in the process of analyzing the motion of objects. These scenes, in introducing the notion of the relation between differential and indefinite integral, it is beyond the comprehension of the integral constant as a computational procedure, so that the learner can understand the meaning of the integral constant in relation to the motion of the object. It is expected that it will be a meaningful basic research on the relationship between differential and integral.

• Bulletin of the Korean Chemical Society
• /
• 제12권4호
• /
• pp.365-367
• /
• 1991

• 한국항공우주학회지
• /
• 제35권8호
• /
• pp.706-713
• /
• 2007

코안다 효과를 유발시키기 위해 환상 슬릿과 팽창률이 일정하지 않은 축소 노즐로부터 분사되는 제트의 구조와 환상의 슬릿과 팽창률이 일정한 노즐로부터 분사되는 제트의 구조를 비교 연구하였다. 실험에 있어서 노즐 입구와 출구 직경을 각각 40mm, 20mm로 하였고, 노즐 출구 평균 속도를 90m/s로 하였다. 3축 이송 장치와 스캐닝 밸브 시스템을 이용하여 제트 축 및 반경 방향 압력을 측정하고, 측정된 정압 및 전압으로부터 구한 속도 분포를 비교 검토하였다. 안정성과 수속성이 우수한 제트를 얻기 위해서는 팽창률이 일정하지 않은 노즐보다 팽창률이 일정한 축소 노즐과 환상의 슬릿을 통해 코안다 효과를 이용하여 분사하는 것이 효과적임을 밝혔다. 또한 팽창에 따른 압력 강하도 팽창률이 일정한 노즐의 경우가 상대적으로 더 작게 됨을 알았다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.33-33
• /
• 2007

In PDP industry, the dielectrics and barrier ribs have been required with low dielectric constant, low melting point and Pb-free composition due to the low power consumption, low signal delay time and the environment restriction. We were studied with $B_2O_3-Al_2O_3$-SrO glass systems about optical, thermal and dielectric properties. The glass forming region of the $B_2O_3-Al_2O_3$-SrO glass systems was narrow due to the amount of the glass former $(B_2O_3)$. The glass transition temperature (Tg) of the glasses was at $550{\sim}590^{\circ}C$. The glasses have 6~8 for the dielectric constant. Furthermore, the transmittance of the glasses was over 80% on the range of the visible ray. From the results, the glasses of the $B_2O_3-Al_2O_3$-SrO glass systems should enable to be a good candidate of the PDP devices for information display with low dielectric constant. The aim of this study is to give a fundamental result of new glass system for low dielectric constant in the information display.

• 한국재료학회지
• /
• 제22권7호
• /
• pp.342-345
• /
• 2012

The dielectric properties and phase transformation of poled <001>-oriented $Pb(Mg_{1/3}Nb_{2/3})O_3-x%PbTiO_3$(PMN-x%PT) single crystals with compositions of x = 20, 30, and 35 mole% are investigated for orientations both parallel and perpendicular to the [001] poling direction. An electric-field-induced monoclinic phase was observed for the initial poled PMN-30PT and PMN-35PT samples by means of high-resolution synchrotron x-ray diffraction. The monoclinic phase appears from $-25^{\circ}C$ to $100^{\circ}C$ and from $-25^{\circ}C$ to $80^{\circ}C$ for the PMN-30PT and PMN-35PT samples, respectively. The dielectric constant (${\varepsilon}$)-temperature (T) characteristics above the Curie temperature were found to be described by the equation$(1/{\varepsilon}-1/{\varepsilon}_m)^{1/n}=(T-T_m)/C$, where ${\varepsilon}_m$ is the maximum dielectric constant and $T_m$ is the temperature giving ${\varepsilon}_m$, and n and C are constants that change with the composition. The value of n was found to be 1.82 and 1.38 for 20PT and 35PT, respectively. The results of mesh scans and the temperature-dependence of the dielectric constant demonstrate that the initial monoclinic phase changes to a single domain tetragonal phase and a to paraelectric cubic phase. In the ferroelectric tetragonal phase with a single domain state, the dielectric constant measured perpendicular to the poling direction was dramatically higher than that measured in the parallel direction. A large dielectric constant implies easier polarization rotation away from the polar axis. This enhancement is believed to be related to dielectric softening close to the morphotropic phase boundary.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권1호
• /
• pp.13-17
• /
• 2005

The Pb(Zr/sub 0.52/Ti/sub 0.48/)O₃/(Ba/sub 0.6/Sr/sub 0.4/)TiO₃[PZT/BST] heterolayered thin films were deposited on Pt/Ti/SiO₂/Si substrates by using the RF sputtering method with different RF power. The PZT/BST heterolayered thin films had the tetragonal structure of the PZT phase and BST phase. Increasing the RF power. the intensity of the PZT (100), (110) peaks and BST (111) peaks were decreased and the intensity of the BST (100), (110) peaks were increased. The thickness ratio of the top layered BST thin film and the bottom layered PZT thin film was 2 to1. The atomic concentration of the Ba, Sr, Pb. Zr, Ti atoms were constant in the PZT thin films and BST thin films, respectively. The Pt atom was diffused to the PZT region in the PZT/BST heterolayered thin films deposited at condition of 60[W] RF power. Increasing the frequency, dielectric constant and loss of the PZT/BST heterolayered thin films were decreased. The dielectric constant and loss of the PZT/BST heterolayered thin films deposited with RF power of 90[W] were 406 and 3%, respectively.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1473-1476
• /
• 2019

PCB (Printed Circuit Board)를 설계할 때 정확한 재료 정보는 매우 중요하다. 전투함의 통합 마스트 (Integrated Mast)에서는 스텔스 기능을 위해 열 저감이 필수적이며 이를 위해서는 내부의 제어 장치에서 발생하는 열을 최대한 줄여야 한다. 제어 장치는 대부분 PCB로 이루어져 있으나 PCB의 유전상수 (Dk, Dielectric Constant)가 정확하게 알려져 있지 않아 임피던스 부정합이 발생하며 이는 열 발생을 매우 증가시킨다. 본 논문에서는 Dk의 측정 방법에 대해 살펴보고 동작 주파수에 따른 Dk 값의 변화가 임피던스 부정합에 미치는 영향을 살펴본다.

• 대한기계학회논문집B
• /
• 제29권2호
• /
• pp.180-188
• /
• 2005

It is well known that a lean burn engine caused by stratified mixture formation has many kinds of advantages to combustion characteristics, such as higher thermal efficiency and lower CO, NOx levels than conventional homogeneous mixture combustion. Although this combustion can achieve low fuel consumption technology, it produces much unburned hydrocarbon and soot because of heterogeneous equivalence ratio in the combustion chamber. Therefore, the stratified mixture formation technology is very important to obtain the stable lean combustion. In this paper, fundamental studies for stratified combustion were carried out using a constant volume combustion chamber. The local effect of mixture formation according to control air-fuel distribution in the chamber was examined experimentally. In addition, the effect of turbulence on stratified charge combustion process was observed by schlieren photography. From this study, we found that the flame propagation speed increase with swirl flow and the swirl promotes the formation of fuel and air mixture.