• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.16-26
• /
• 2010

Objective: The purposes of this study were to evaluate the force and stress depending on the type, deflection and thickness of the materials and to evaluate the mechanical properties of thermoplastic materials after repeated loading. Methods: Four types of thermoplastic products were tested. Force until the deflections of 2.0 mm and the stress when the materials were restoring to its resting position were evaluated. The mechanical properties of thermoplastic materials evaluated after 5 repeated loading cycles. Results: The interaction was observed between the thickness and the deflection (p < 0.05) from the regression equation. Thickness and amount of deflection rather than products and materials showed the largest effect on force and stress. In all products, at least 159 gf of force was required for more than 1.0 mm deflection or when materials with 1.0 mm thickness were deflected. The stress recorded was more than 19 gf/$mm^2$. During repeated loading, each group showed significant difference on the force and the stress (p < 0.01), 10 - 17% reduction of force and 4 - 7% reduction of stress in average. Conclusions: Proper thickness of thermoplastic materials and deflection level of tooth movement should be decided for the physiologic tooth movement. Force decay after repeated loading should be considered for the efficient tooth movement.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.181-186
• /
• 2011

Thermal stability of the $TiO_2$ SCR catalyst with W03 loading was investigated in terms of structural and morphological analyses. The $TiO_2$ catalysts with 10 w% $WO_3$ content and without $WO_3$ were prepared. which were heat-treated at $800^{\circ}C$ for 5 h. It was found that the catalytic acidity was decreased by thermal degradation in the $WO_3-TiO_2$ specimen that relatively less than the $TiO_2$ specimen from FT-IR analysis. The phase transition of the $TiO_2$ catalyst from anatase to rutile was increased by heal-treatment, and the percentage of the rutile phase was 28.4 % in the $WO_3-TiO_2$ and 22.9 % in the $TiO_2$. A shell region of $WO_3$ distinguished from a $TiO_2$ particle was also observed in the grain boundary region, and the $WO_3$ led to the suppression of grain growth. It could be confirmed that the suppression of grain growth can contribute to the improvement of catalytic properties for thermal stability more than the increase of anatase-rutile phase transformation which cause the reduction of the catalytic activity in the $TiO_2$ SCR catalyst by the presence of $WO_3$.

• Progress in Medical Physics
• /
• v.23 no.1
• /
• pp.33-41
• /
• 2012

For applying the quality assurance (QA) of volumetric modulated arc therapy (VMAT) introduced in Eulji Hospital, we classify it into three different QA steps, treatment planning QA, pretreatment delivering QA, and treatment verifying QA. These steps are based on the existing intensity modulated radiation therapy (IMRT) QA that is currently used in our hospital. In each QA step, the evaluated items that are from QA program are configured and documented. In this study, QA program is not only applied to actual patient treatment, but also evaluated to establish a reference of clinical acceptance in pretreatment delivering QA. As a result, the confidence limits (CLs) in the measurements for the high-dose and low-dose regions are similar to the conventional IMRT level, and the clinical acceptance references in our hospital are determined to be 3 to 5% for the high-dose and the low-dose regions, respectively. Due to the characteristics of VMAT, evaluation of the intensity map was carried out using an ArcCheck device that was able to measure the intensity map in all directions, $360^{\circ}$. With a couple of dosimetric devices, the gamma index was evaluated and analyzed. The results were similar to the result of individual intensity maps in IMRT. Mapcheck, which is a 2-dimensional (2D) array device, was used to display the isodose distributions and gave very excellent local CL results. Thus, in our hospital, the acceptance references used in practical clinical application for the intensity maps of $360^{\circ}$ directions and the coronal isodose distributions were determined to be 93% and 95%, respectively. To reduce arbitrary uncertainties and system errors, we had to evaluate the local CLs by using a phantom and to cooperate with multiple organizations to participate in this evaluation. In addition, we had to evaluate the local CLs by dividing them into different sections about the patient treatment points in practical clinics.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.2
• /
• pp.215-220
• /
• 2006

Background : A spirometric reference equation was recently developed for the general population in Korea. The applicability of the new Korean equation to clinical practice was examined by comparing it with the Morris equation, which is one of the most popular reference equations used for interpreting the spirometric patterns and for grading the disease severity in Korea. Methods : Spirometry was performed on 926 men and 694 women, aged 20 years or older, in November 2004 at the Asan Medical Center, Seoul, Korea. The subjects' age, gender, height, weight, and spirometric values ($FEV_1$ [forced expiratory volume in one second], FVC [forced vital capacity], and $FEV_1/FVC$) were obtained. The spirometric patterns and disease severity were evaluated using both equations, and the results of the Korean equation were compared with the Morris equation. The spirometric patterns were defined as normal, restrictive, obstructive, and undetermined according to the level of $FEV_1/FVC$ and FVC. The disease severity was defined according to the level of $FEV_1$ level for subjects with an airflow limitation, and according to the FVC level for those subjects without an airflow limitation. Results : Spirometric patterns were differently interpreted in 22.5% (208/926) of the men and 24.8% (172/694) of the women after the application of the Korean equation compared with the Morris equation. Of the subjects with airflow limitation, disease severity was differently graded in 30.2% (114/378) of the men and 39.4% (37/94) of the women after the application of the Korean equation. Of the subjects without airflow limitation, disease severity was differently graded in 27.9% (153/548) of the men and 30.2% (181/600) of the women after the application of the Korean equation. Conclusion : Achange in the reference equation for spirometry could have an effect on the interpretation of spirometric patterns and on the grading of disease severity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.5-10
• /
• 2012

In general, the fabrications of the LEDs with mesa structure are performed grown by MOCVD method. In order to etch and separate each chips, the LEDs are passed the RIE and scribing processes. The RIE process using plasma dry etching occur some problems such as defects, dislocations and the formation of dangling bond in surface result in decline of device characteristic. The SAG method has attracted considerable interest for the growth of high quality GaN epi layer on the sapphire substrate. In this paper, the SAG method was introduced for simplification and fabrication of the high quality epi layer. And we report that the size of selective area do not affect the characteristics of original LED. The diameter of SAG circle patterns were choose as 2500, 1000, 350, and 200 ${\mu}m$. The SAG-LEDs were measured to obtain the device characteristics using by SEM, EL and I-V. The main emission peaks of 2500, 1000, 350, and 200 ${\mu}m$ were 485, 480, 450, and 445 nm respectively. The chips of 350, 200 ${\mu}m$ diameter were observed non-uniform surface and resistance was higher than original LED, however, the chips of 2500, 1000 ${\mu}m$ diameter had uniform surface and current-voltage characteristics were better than small sizes. Therefore, we suggest that the suitable diameter which do not affect the characteristic of original LED is more than 1000 ${\mu}m$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.147-152
• /
• 2013

Purpose: The aim of this study was to propose the position of maxillary anterior teeth and intercanine width measurements based on the incisive papilla in accordance with the cephalic type and gender of dentate Korean adult with normal teeth alignment. Materials and methods: 42 students with Class I normal occlusion, without crowding or spacing, were selected from the Chonnam National University School of Dentistry. The lateral skull radiographs of the subjects were taken and were classified as different cephalic types, based on their PFH / AFH ratios. 42 casts of their maxilla were prepared and both the distance between the upper central incisors and the middle of the incisor papilla was measured with a vernier caliper (A) and the distance between the maxillary canine cusp tips (B) were measured. Statistical analysis was performed using SPSS version 15 and their significance was investigated. Results: For dolichocephalic group, the mean values for A and B were 8.43 (SD: 0.61) and 36.73 (SD: 2.17), respectively. The mean value for A was 8.51 (SD: 1.27) for the mesocephalic group and 8.76 (SD 1.03) for the brachycephalic group. The mean value for B was 35.91 (SD: 1.86) for the mesocephalic group and 37.34 (SD: 2.23) for the brachycephalic group. For the male group, the mean A value was 8.86 (SD: 1.04) and the mean B value was 37.60 (SD: 0.24). For the female group, the mean A value was 8.41 (SD: 0.93) and the mean B value was 36.18 (SD: 2.01). The difference between male and female group in A values were not statistically significant (P>.05). The B values of the male subjects were greater than those of the female subjects and was statistically significant (P<.05). Conclusion: 42 students with normal dentition and occlusion in korea, the distance from the incisive papilla and the incisal edge of maxillary central incisors had no difference in cephalic type or gender. However, the distance between the cusp tip of both canines had significant difference in gender where the male showed higher values than the female, while having no difference in cephalic types.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.5
• /
• pp.629-641
• /
• 1999

Background: Corticosteroid is most potent and effective anti-inflammatory medication currently available and inhaled form has been used in the long-tenn control of asthma. Fluticasone propionate(Flixotide/Flovent: FP) is highly potent and topically active inhaled corticosteroid and has at least twice the potency of beclomethasone dipropionate(BDP) in the control of asthma. The aim of this study was to compare the efficacy of FP and BDP in several aspects. Method: Fifty patients with asthma were treated in a randomized, parallel group study of 4 weeks duration. During 2-week run-in period $\beta_2$-agonist was administered. After run-in period, FP $500{\mu}g/day$ was administered via Diskhaler or BDP $800{\mu}g/day$ via reservoir dry-power device. During the run-in and treatment period, morning and evening peak expiratory flow rate(PEFR) were measured daily. Daytime and nighttime asthma symptoms, daytime and night-time rescue bronchodilator use were checked daily. $FEV_{1.0}$ and FVC were measured biweekly in both groups. Results: Three patients treated with FP and seven patient treated with BDP were dropped out. Therefore forty patients completed the study. Morning and evening PEFR was increased and diurnal variation of PEFR decreased significantly in both groups. $FEV_{1.0}$ increased significantly in FP treatment group but not in BDP group. There were also improvements in daytime and night-time asthma symptoms, daytime and night-time rescue bronchodilator use in both groups after treatment There were no significant difference between groups in any of the efficacy parameters. Therapeutic effects were demonstrated earlier in patient treated with FP than BDP. Conclusion: In this study, $500{\mu}g/day$ fluticasone propionate was as effective as $800{\mu}g/day$ beclomethasone dipropionate in the control of asthma. Therapeutic effects were demonstrated earlier in patient treated with FP than BDP without adverse effect.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.2
• /
• pp.195-203
• /
• 1999

Background: Telomerase enzyme activity is not detected in most normal cells, a phonomenon believed to be associated with limitations on cellular proliferation. Since this activity is detected in nearly all human tumor, including lung cancers, it has been suggested that telomerase activation may be coupled to acquisition of malignant phenotype. In this study, we determined whether telomerase activity was associated with tumor pathologic stage. Methods: Primary tumor specimens obtained by bronchoscopic biopsies from 33 patients were analyzed. Telomerase activity was measured by means of a modified Telomeric Repeat Amplication Protocol(TRAP) assay. Results: Telomerase activity was detected in 23 of the 27 non-small-cell lung cancer and 5 of 6 small-cell lung cancer. A few primary tumors did not appear to have detectable telomerase activity. Positive associations were found between the telomerase-positive rate and tumor stage(p<0.05). Conclusion: High telomerase activity is detected frequently in primary lung cancers that exhibit high tumor cell proliferation rates and advanced pathologic stage.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.3
• /
• pp.277-284
• /
• 2006

Background : Delayed treatment of pulmonary tuberculosis is an important problem because it results in greater mortality and the nosocomial transmission of tuberculosis. This study was conducted to analyze the factors that contribute to the delayed treatment of pulmonary tuberculosis in a university hospital and we wanted to provide basic data for instituting an effective management program for tuberculosis. Methods : we retrospectively reviewed the medical records of 155 patients with smear-positive or culture-positive pulmonary tuberculosis and who were treated between May 1999 and October 1999. A case-control study was performed to analyze the factors. We then tried to follow up the patients in delayed treatment group via telephone for the purpose of assessing the therapeutic interventions. Results : Among 150 patients, 55 (37%) were included in the delayed treatment group. The factors associated with delayed treatment on the univariate analysis included age (61 vs 40 years old; p <0.001), a smear-negative sputum test for acid-fast bacilli (AFB) (85% vs 55%; p <0.001) and no visits to a private clinic before the patient presented to the university hospital (56% vs 36%; p = 0.014). Multivariate analysis revealed that old age (p = 0.001), a smear-negative sputum for AFB (p = 0.001), and lower lobe infiltrate on chest X-ray (p = 0.041) were the independent predictors of delayed treatment. Of the 22 patients who did not receive any treatment, 20 of them 91%) consented to our suggestion of revisiting the hospital. Conclusion : Delayed treatment of patients with pulmonary tuberculosis is not uncommon in a university hospital. Old age, smear-negative for AFB, and lower lobe infiltrate on chest X-ray are the risk factors for delayed treatment. A more systematic management system is required for achieving better control of tuberculosis.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.280-285
• /
• 2015

In radiation therapy fields, a brachytherapy is a treatment that kills lesion of cells by inserting a radioisotope that keeps emitting radiation into the body. We currently verify the consistency of radiation treatment plan and dose distribution through film/screen system (F/S system), provide therapy after checking dose. When we check dose distribution, F/S systems have radiation signal distortion because there is low resolution by penumbra depending on the condition of film developed. In this study, We fabricated a $HgI_2$ Semiconductor radiation sensor for base study in order that we verify the real dose distribution weather it's same as plans or not in brachytherapy. Also, we attempt to evaluate the feasibility of QA system by utilizing and evaluating the sensor to brachytherapy source. As shown in the result of detected signal with various source-to-detector distance (SDD), we quantitatively verified the real range of treatment which is also equivalent to treatment plans because only the low signal estimated as scatters was measured beyond the range of treatment. And the result of experiment that we access reproducibility on the same condition of ${\gamma}$-ray, we have made sure that the CV (coefficient of variation) is within 1.5 percent so we consider that the $HgI_2$ sensor is available at QA of brachytherapy based on the result.