• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.113-119
• /
• 2010

Software for GafChromic EBT2 film dosimetry was developed in this study. The software provides film calibration functions based on color channels, which are categorized depending on the colors red, green, blue, and gray. Evaluations of the correction effects for light scattering of a flat-bed scanner and thickness differences of the active layer are available. Dosimetric results from EBT2 films can be compared with those from the treatment planning system ECLIPSE or the two-dimensional ionization chamber array MatriXX. Dose verification using EBT2 films is implemented by carrying out the following procedures: file import, noise filtering, background correction and active layer correction, dose calculation, and evaluation. The relative and absolute background corrections are selectively applied. The calibration results and fitting equation for the sensitometric curve are exported to files. After two different types of dose matrixes are aligned through the interpolation of spatial pixel spacing, interactive translation, and rotation, profiles and isodose curves are compared. In addition, the gamma index and gamma histogram are analyzed according to the determined criteria of distance-to-agreement and dose difference. The performance evaluations were achieved by dose verification in the $60^{\circ}$-enhanced dynamic wedged field and intensity-modulated (IM) beams for prostate cancer. All pass ratios for the two types of tests showed more than 99% in the evaluation, and a gamma histogram with 3 mm and 3% criteria was used. The software was developed for use in routine periodic quality assurance and complex IM beam verification. It can also be used as a dedicated radiochromic film software tool for analyzing dose distribution.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.1
• /
• pp.49-64
• /
• 2014

Seabed beneath and near the coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If the liquefaction occurs in the seabed, the structure may sink, overturn, and eventually fail. Especially, the seabed liquefaction behavior beneath a gravity-based structure under wave loading should be evaluated and considered for design purpose. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using 2-dimensional numerical wave tank. The 2-dimensional numerical wave tank was expanded to account for irregular wave fields, and to calculate the dynamic wave pressure and water particle velocity acting on the seabed and the surface boundary of the structure. The simulation results of the wave pressure and the shear stress induced by water particle velocity were used as inputs to a FLIP(Finite element analysis LIquefaction Program). Then, the FLIP evaluated the time and spatial variations in excess pore water pressure, effective stress and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the analysis, when the shear stress was considered, the liquefaction at the seabed in front of the structure was identified. Since the liquefied seabed particles have no resistance force, scour can possibly occur on the seabed. Therefore, the strength decrease of the seabed at the front of the structure due to high wave loading for the longer period of time such as a storm can increase the structural motion and consequently influence the stability of the structure.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.2
• /
• pp.93-103
• /
• 2020

The average growth day of 11 maize varieties from planting to silking in the first cropping (FC) was 89.5 days and in the second cropping (SC) was 46.7 days, which was 43 days faster than in the FC. The average 100-kernel weight (100 KW) in the FC was 28.4 g and 18.3 g in the SC, which was approximately 36.4% lower than that in the FC. The average crude oil content of FC was 3.97% and SC was 3.08%, which was about 0.89% lower than that of FC. The composition of stearic and oleic acid was significantly higher in FC, whereas palmitic and linoleic acid were higher in SC; however, linolenic acid was not statistically different between the two crops. The crude oil content was negatively correlated with linoleic acid (FC -0.264^ns, SC -0.504**) and positively correlated with linolenic acid (0.526**). Unsaturated fatty acid (USFA) composition showed a significant difference between FC (83.48%) and SC (82.96%). Total phytosterol content was 598.3 mg/100 g and 701.9 mg/100 g in FC and SC, respectively, and showed significant difference by planting dates. The β-sitosterol content showed no statistical difference between the planting dates, but campesterol and stigmasterol were significantly higher in SC than in FC. Therefore, it was considered that the temperature condition during the ripening period affects the 100 KW of maize, and this leads to the variation in phytosterol content. However, among phytosterols, β-sitosterol was relatively little affected by the planting dates. USFA composition showed a significantly negative correlation with phytosterol content. Considering the results, the relatively high phytosterol content in SC was mainly because of the delay in progress of starch accumulation as daily air temperature decreased from the middle of the ripening period, whereas progress of phytosterol accumulation in the maize kernel was considered relatively faster than that of starch accumulation.

• Journal of Applied Biological Chemistry
• /
• v.60 no.1
• /
• pp.79-86
• /
• 2017

Microbes in forest are very important due to not only to enhance soil fertility but also maintain a healthy ecosystem by supplying the energy available to living organisms by producing various kinds of enzymes related to degradation of lignocellulosic biomass. In order to isolate a lignocellulosic biomass degrading bacterial strain from the Jurassic park located in Gyeongnam National University of Science and Technology, We used the Luria-Bertani-Carboxymethyl cellulose (CMC) agar trypan blue method containing 0.4 % carboxymethyl cellulose and 0.01 % trypan blue. As a result, we isolated a bacterial strain showing both activity on the CMC and xylan. To identify the isolated strain, 16S rRNA sequencing and API kit analysis were used. The isolated strain turned out to belong to Bacillus species and then named Bacillus sp. GJY. In the CMC zymogram analysis, it showed that one active band of about 28kDa in size is present. Xylan zymogram analysis also showed to have one active band of about 25kDa in size. The optimal growth temperature of Bacillus sp. GJY was $37^{\circ}C$. The maximal activities of CMCase and xylanase were 12 hour after incubation. The optimal pH and temperature for CMCase were 5.0 and $40^{\circ}C$, respectively, whereas the optimal pH and temperature for xylanase was 4.0 and $40^{\circ}C$. Both activities for CMCase and xylanase showed to be thermally stable at 40and $50^{\circ}C$, while both activities rapidly decreased at over $60^{\circ}C$.

• Journal of Animal Science and Technology
• /
• v.52 no.4
• /
• pp.337-346
• /
• 2010

We report non-specific immune responses and disease resistance against Vibrio anguillarum, Streptococcus iniae and Edwardsiella tarda by dietary supplementation of fermented garlic powder (FGP) in olive flounder for the first time. Four isonitrogenous (45% crude protein) and isocaloric (17.1 MJ/kg) diets were formulated to have 0%, 0.5%, 1% and 2% of the FGP (G-0, G-0.5, G-1 and G-2). The experimental diets were fed to juvenile olive flounder averaging 23.4 g in triplicate groups (90 fish/group) in a flow-through system. After a five-week feeding trial, healthy fish with similar sizes from each tank were selected and injected with 1 ml of three bacteria each to evaluate disease resistance of the fish. During the 5-week feeding trial, the weight gain, specific growth rate, feed conversion ratio, protein efficiency ratio, and survival of the fish were not significantly affected by the experimental diets. However, feed intake was significantly lower (P<0.05) in the fish fed the G-2 diet compared with the control group. Hemoglobin, myeloperoxidase activity, cholesterol and HDL-cholesterol were not different between the dietary groups. However, hematocrit, nitroblue tetrazolium (NBT) activity, and lysozyme activity were increased (P<0.05) with an increment of dietary FGP. Plasma triglyceride of the fish fed the G-0.5 diet was significantly lower than that of fish fed the control diet. The cumulative mortality was lower in the fish fed diets containing FGP compared with the control group in the challenge test except for the bacteria Edwardsiella tarda. The results in this study indicate that dietary supplementation of FGP can enhance the non-specific immune responses and disease resistance of olive flounder against V. anguillarum and S. iniae.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.2
• /
• pp.117-122
• /
• 2013

BACKGROUND: The scab, which is caused by Venturia nashicola, gives serious damages to pear trees. 'Niitaka' accounts for 82% of areas in pear cultivation. However 'Niitaka' is a scab susceptible cultivar. So, most of Korean farmers who growing pear trees have suffered by economic losses with the scab. In this research, we evaluated the scab resistance among elite pear seedlings to clarify genetics about the scab resistance. And we analyzed photosynthetic features with these seedlings to develop suitable cultivar which is advantageous for producing quality fruits during the growth and development of plants. METHODS AND RESULTS: We measured the rates of scab incidence among seedlings in a field experiment condition and an in-vitro test. An in-vitro test has been done with field experiment-based results. We made plant materials by grafting branches of each seedlings with 'Kongbae' rootstocks. And they had been grown for one month. Then, scab conidia suspension is sprayed to seedlings and sustained for 40 days under the controlled environment. As the results, 6 seedlings displayed lower incidence rates than other seedlings and 'Niitaka'. We also measured instant photosynthetic rates of each seedlings to determine the correlation between photosynthetic rates and fruit characteristics. However, it seemed that there is no correlation between them. CONCLUSION(S): Among the seedlings, 6 seedlings displayed the higher resistance to scab than other seedlings and 'Niitaka'. This characteristics is considered to be come from the gene expression of European pear. And we found that photosynthetic rate in trees rarely does not influence the fruit characteristics. It is considered to be affected by cultivar's own characteristics.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.21-29
• /
• 2016

We mix food waste leachate and sewage sludge by the proportion of 1:9, 3:7 and 5:5. It turns out that they produced 233, 298 and 344 $CH_4{\cdot}mL/g{\cdot}VS$ of methane gas. The result suggests that as the mixing rate of food waste leachate rises, the methane gas productions increases as well. And more methane gas is made when co-digesting sewage sludge and food waste leachate based on the mixing ratio, rather than digesting only sewage sludge alone. Modified Gompertz and Exponential Model describe the BMP test results that show how methane gas are produced from organic waste. According to the test, higher the mixing rate of food waste leachate is, higher the methane gas productions is. The mixing ratio of food waste leachate that produces the largest volume of methane gas is 3:7. Modified Gompertz model and Exponential model describe the test results very well. The correlation values($R^2$) that show how the results of model prediction and experiment are close is 0.92 to 0.98.

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.277-283
• /
• 2011

In this study, engineering grade and high intensity reflective sheets were prepared with glass beads and their reflection performance and physical properties were investigated. The reflective sheets prepared by using glass beads are divided into enclosed or encapsulated lens type, depending on whether the glass beads are open in air or not. Because of an extra layer on the glass bead surface, the enclosed lens type reflective sheets show very little change in the properties by bad weather conditions, compared to encapsulated lens type reflective sheets. Optimization of the amount of glass beads on the surface was carried out, which determines the retroreflective properties. Enclosed and encapsulated lens type reflective sheets with various colors were prepared and their coefficients of retroreflection were determined. The encapsulated type reflective sheet with white color shows a coefficient of retroreflection of $210.4cd/1x{\cdot}m^2$, which is higher than the enclosed type ($74cd/1x{\cdot}m^2$). Effect of washing on the reflective property and adhesive power of the reflective sheets was investigated, and it is found that the number of glass beads decreased with washing and the aluminum layer deposited was damaged extensively in the encapsulated lens type reflective sheets.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.365-370
• /
• 1996

To get the basic data for organic farming, the Chinese cabbage(Brassica pekinensis Rupr.) was cultivated in field of sandy loam soil and compost was applied at the ratios of 0, 20, 40, 80, 120ton per ha, respectively, with N-P-K elements. The yield of Chinese cabbage was maximum in the plot of compost 40t/ha application and it's weight was 3,783g/head. The chemical components of Chinese cabbage were no remarkable changes with the increasing amount of compost application. Content of organic matter in soil after experiment was finished was 39g/kg, total nitrogen was 2.2g/kg, available phosphorus was 1,927mg /kg. CEC was $11.4cmol^+/kg$, exchangable cations were K:0.5. Ca:0.6. Mg:0.3 and $Na:0.2cmol^+/kg$ in treatment of compost 120 t/ha.

• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.342-347
• /
• 2009

We sought to improve the methods for washing fresh raw ginseng. The quality of ginseng surface-washed by different methods was evaluated during storage at 10C and $20^{\circ}C$. The raw ginseng surface-washing method was a full-cone spray-type procedure using water and air. The water for decontamination had an electrolysis value of 80 ppm, also known as electrolysis water $2^{\circ}C$ water and water containing 5 ppm chlorine dioxide, were also used for decontamination. The Hunter color (${\Delta}E$) of ginseng washed with water withan electrolysis value of 80 ppm, or water with 5 ppm chlorine dioxide, was greater than that seen after other washing methods were used. The weight loss after washing with 5 ppm chlorine dioxide water was similar to that seen after washing with $2^{\circ}C$ water or 80 ppm electrolysis water. Reductions in total microorganism levels, and counts of yeasts and molds, assayed 10 days after washing with 5 ppm chlorine dioxide water were greater than seen after use of other sterilization methods. Quality maintenance on storage, at both 10C and 20C, after washing with 80 ppm electrolysis water, was better than that noted after other sterilization methods. The moisture content of washed ginseng was similar under all storage conditions tested.