• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.295-301
• /
• 1996

This study was carried out to clarify the effect of sprout length, burried depth of seed and CaO$_2$ seed coating on emergence, seedling stand and early growth of rice in puddled-soil drill seeding at Junbuk in 1995. The cultivar tested was Dongjinbyeo(Japonica type). Although the longer sprouted seeds were caused the better seedling stand, 4mm sprout length of seeds appeared to be appropriate for good seedling stand and seeding uniformity, while 6mm sprouted seed resulted in ununiform seedling establishment. Rapid emergence and increased seedling stand were obtained by CaO$_2$ seed coating, which had effect more on soaked seed than on sprouted seed, but the seedling stand of sprouted seeds significantly reduced at deeper than 1cm seeding depth and also emergence rate of sprouted seeds significantly reduced at deeper than 2cm seeding depth.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.221-232
• /
• 2023

This paper presents a novel convolutional neural network (CNN)-based approach for predicting bolt clamping force in the early bolt loosening state of bolted structures. The approach entails tightening eight bolts with different clamping forces and generating frequency responses, which are then used to create a similarity map. This map quantifies the magnitude and shape similarity between the frequency responses and the initial model in a fully fastened state. Krylov subspace-based model order reduction is employed to efficiently handle the large amount of frequency response data. The CNN model incorporates a regression output layer to predict the clamping forces of the bolts. Its performance is evaluated by training the network by using various amounts of training data and convolutional layers. The input data for the model are derived from the magnitude and shape similarity map obtained from the frequency responses. The results demonstrate the diagnostic potential and effectiveness of the proposed approach in detecting early bolt loosening. Accurate bolt clamping force predictions in the early loosening state can thus be achieved by utilizing the frequency response data and CNN model. The findings afford valuable insights into the application of CNNs for assessing the integrity of bolted structures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.1
• /
• pp.23-30
• /
• 1993

This study was conducted to obtain the fundamental information on antioxidant component as affected by process of grain filling in different plant types of sesame. Sesamin and sesamolin as antioxidant components, oil content and seed weight were investigated for two plant types with different by branching habit. The sesamin and sesamolin contents in grains followed a pattern of increase immediately after flowering in branch type and monocapsule habit than non-branch type and tricapsule habit. But they started to decrease around 45 days after flowering, which oil content and seed weight continued to increase until maturity. The sesamin content increased quickly up from 10th to 40th day after flowering and showed almost maximum at 43th day after flowering. The sesamolin content increased quickly up from 20th to 30th day after flowering and showed almost maximum at 45th day after flowering. The oil content increased quickly up from 20th to 30th day after flowering and showed almost maximum at 47th day after flowering. The seed weight increased quickly up from 20th to 40th day after flowering and showed almost maximum at 48th day. The sesamin content, sesamolin content, oil content and seed weight showed almost maximum at from 43th to 48th day after flowering. So that this period was considered to be of physiological maturity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.212-220
• /
• 1995

The optimum seeding date and the suitable seeding period for puddled drill seeding of rice at southern plain area were determined by using Sinunbongbyeo (early maturing variety), Hwaseongbyeo(medium maturing var.) and Dongjinbyeo (late medium maturing var.) at National Honam Agricultural Experiment Station from 1993 to 1994, Seedling stand was decreased significantly at seeding on April 25 in all varieties, Threshold seed-ing dates for stable ripening was estimated as June 10 in Sinunbongbyeo, May 31 in Hwaseongbyeo and May 25 in Dongjinbyeo, The 1,000 grain weight and the ripened grain rate were highest at seed-ing on May 10 or May 25 in all varieties, and decreased significantly at seeding on June 25 in Sinunbongbyeo and seeding after June 10 in Hwaseongbyeo and Dongjinbyeo, The optimum average air temperature for 40 days after heading was 22.6$^{\circ}C$ for highest ripening rate and 22.0$^{\circ}C$ for heaviest 1,000 grain weight. The optimum seeding date for highest yield was May 9 in Dongjinbyeo, May 13 in Hwaseongbyo and May 15 in Sinunbongbyeo.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.629-636
• /
• 1995

This study was carried out to clarify the proper nitrogen application methods under the different seedling density in puddled-soil drill seeding of rice. Seedling density was adjusted as 30, 60, 90, 120 and 150ea/$m^2$ just after emergence and nitrogen was applied with five methods including conventional respectively. The maximum tillering stage was shorten as the seedling density was increase but decreased the percentage of productive tillers. Lodging was occurred serverely as the seedling was more than 120ea/$m^2$, when nitrogen was applied at panicle initiation stage. Grain yield wasn't significantly different among seedling densities when it was more than 60ea/$m^2$, but the density of 30ea/$m^2$ was decreased. It wasn't significantly different among the nitrogen application methods when it was more than 90ea/m, but was higher at early application of tillering fertilizer (T$_2$) than conventional method when the seedling density was less than 60ea/$m^2$. Supposing that the yield of reseeding is the same as optimum seedling density, minimum seedling density needs for reseeding would be less than 55 ea/$m^2$ as the aspect of income allowed for managing expense.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.5
• /
• pp.83-91
• /
• 2006

Recently, the intensive rainstorm possibly induced by global warming plays a key role on the instability of railway adjacent slopes. The instability of slopes results as covering and loss of railway lines induced by slided soil mass. According to the site investigation on the failed slopes triggered by rainfall, low types of slope failure were observed: shallow, intermediate, gully erosion, and soil-rock interface failures. The observation reveals the different characteristics of slope failure depending on the thickness of soil layer, morphological features of slope, etc. Based upon the observations, flume tests were conducted to analyze the sliding mechanism of each failure. The variables of flume test are soil layer thickness, rainfall intensity, and morphology of slope under the constant condition of the percentage of fine, initial soil moisture content, slope angle and compaction energy. Test results show that shallow failure was mostly observed from the surface of the slope and caused by the soil erosion; in addition, compared to the other types of failure, the occurrence of initial erosion is late, however, the development of erosion is fast. In gully erosion failure, the collected water from the water catchment area helps erosion of the upper soil layer and transfer of residual corestone, which impedes the erosion process once the upper soil layers are eroded and corestone are exposed. The soil-rock interface failure shows the most fast initial erosion process among the failure types. Interestingly, the common feature observed from the different types of failure was the occurrence of the initial deformation near the toe of slopes which implies the existence of surbsurface flow along the downslope direction.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.1
• /
• pp.50-55
• /
• 2023

The present study investigated the effects of forage cutting and baler mixing on the chemical compositions, fermentation indices, and aerobic stability of whole crop rice (WCR) haylage. The WCR ("Youngwoo") was harvested at 48.4% dry matter and ensiled into a 300 kg bale silo with forage cutting (whole crop without cutting vs. 5 cm of cutting length). The WCR forages were ensiled without baler mixing process (CON) or with (MIX). The concentrations of dry matter, crude protein, ether extract, crude ash, neutral detergent fiber, and acid detergent fiber of whole crop rice before ensiling were 48.4, 9.70, 2.57, 6.11, 41.2, and 23.5%, respectively. The forage cutting did not affect the chemical compositions, fermentation indices, microbes, and aerobic stability of WCR haylage (p>0.05). The CON haylages tend to be higher in NDF content (p<0.10). The MIX haylages had lower in lactate (p=0.019), and lactate:acetate ratio (p<0.001). The MIX haylages had higher in lactic acid bacteria (LAB) (p=0.010). Therefore, this study concluded that the fermentation quality of WCR haylage improved by baler mixing, but had no effects by forage cutting.

• Composites Research
• /
• v.20 no.3
• /
• pp.8-16
• /
• 2007

Bending collapse of light-weight square tubes used for vehicle structure components is a dominant failure mode in oblique collision and rollover of vehicles. In this paper bending performances of aluminum-GFRP hybrid tube beams were evaluated in relation with bending deformation behavior and energy absorption characteristics. Aluminum/GFRP hybrid tube beams fabricated by inserting adhesive film between prepreg and metal layer were used in the bending test. Failure mechanisms of hybrid tubes under a bending load were experimentally investigated to analyze the bending performance as a function of ply orientation and composite layer thickness. Ultimate bending moments and energy absorption capacity of hybrid tube beams were obtained from the measured load-displacement corves. It was found that aluminum/GFRP hybrid tubes could be converted to rather stable collapse mode showing excellent energy absorption capacity in comparison to the pure aluminum tube beams. In particular, the hybrid tube beam with $[0^{\circ}/90^{\circ}]s$ composite layer showed a large improvement by about 78% in energy absorption capacity and by 29% in specific energy absorption.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.575-589
• /
• 2008

In the present work, we investigate the hydrodynamic behavior of a turbulent bore, such as tsunami bore and tidal bore, generated by the removal of a gate with water impounded on one side. The bore generation system is similar to that used in a general dam-break problem. In order to the numerical simulation of the formation and propagation of a bore, we consider the incompressible flows of two immiscible fluids, liquid and gas, governed by the Navier-Stokes equations. The interface tracking between two fluids is achieved by the volume-of-fluid (VOF) technique and the M-type cubic interpolated propagation (MCIP) scheme is used to solve the Navier-Stokes equations. The MCIP method is a low diffusive and stable scheme and is generally extended the original one-dimensional CIP to higher dimensions, using a fractional step technique. Further, large eddy simulation (LES) closure scheme, a cost-effective approach to turbulence simulation, is used to predict the evolution of quantities associated with turbulence. In order to verify the applicability of the developed numerical model to the bore simulation, laboratory experiments are performed in a wave tank. Comparisons are made between the numerical results by the present model and the experimental data and good agreement is achieved.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.9-20
• /
• 2023

For highway concrete structures, the deterioration of the structure is accelerated due to the increase in the use of deicing materials, and sectional repair work is being frequently carried out to restore performance. However, after the repair work, re-damage such as cracks, delamination, and poor bond performance is exhibited in the repaired sectional area. In this study, overseas repair material requirements were first analyzed, and present domestic requirements were improved repair material performance through field surveys of common concrete structures, laboratory experiments, and test construction on a disused concrete bridge. In addition, performancebased quality requirements were presented so that all materials that meet the required performance can be applied, and different test methods for each material were unified into concrete test methods for consistent test results analysis. The considered performance requirements were compression strength, bending strength, and bond strength for structural properties, and length change rate, crack resistance, thermal expansion coefficient, and elasticity coefficient were for dimensional behavior. For resistance to chloride penetration resistance and freeze-thaw resistance were presented as durability. The proposed requirements for concrete repair materials are expected to contribute to the improvement of the quality of concrete sectional repair work in Korea.