• Journal of Veterinary Clinics
• /
• v.30 no.6
• /
• pp.428-434
• /
• 2013

The combinations of alfaxalone and remifentanil constant rate infusion in dogs premedicated with xylazine or acepromazine were compared. Ten beagle dogs were used and assigned randomly into 2 groups (5 dogs for each group). In group AAR, dogs were premedicated with 0.02 mg/kg of intravenous acepromazine at 15 min before induction. In group XAR, 1.1 mg/kg of intravenous xylazine was premedicated at 5 min before induction. In both groups, anesthesia was induced with alfaxalone and maintained with the combination of alfaxalone (6 mg/kg/hr, IV) and remifentanil (0.05 ${\mu}g/kg/min$, IV). bispectral index score was decreased after induction of anesthesia compared with baseline in both groups and no steep increase was observed during anesthesia. Bispectral index scores and electromyographs in group XAR were significant decreased compared with those in group AAR. Although the pulmonary depression in group XAR and tachycardia in group AAR should be considered to use these regimes, the combinations of alfaxalone and remifentanil constant rate infusion in dogs premedicated with xylazine or acepromazine provided adequate analgesia and anesthesia in this study.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.338-342
• /
• 2013

BACKGROUND: Two Field tests were conducted at Buan and Yangpyung in 2012 and 2013 to confirm controlling effect of mulberry popcorn disease and mulberry Sucker pests which are becoming serious in mass cultivation area of eco-friendly farming mulberry. METHODS AND RESULTS: As the treatments, 4 Natural products and 3 microbials were applied and 4 mulching materials were used. On the prevent effect of mulberry popcorn disease(Sclerotinia shiraiana) by using mulching materials, nonwoven fabric mulching showed worse effect than non-mulched treatment plot. Moreover, rice straw mulching showed significantly worse effect compare to nonwoven fabric and herb mulching treatments. Natural plant extracts and microbials showed 40~65% control value in 2013, which is little bit worse than 2012 results. On the control effect of mulberry Sucker(Amomoneura mori), organic products which combined with neem, sophora and derris showed excellent result as similar control level of Thiophanate-methyl. It means the chemical products can be replaced with organic product. CONCLUSION(S): According to the 2 years studied results, integrate eco-friendly farming measures are recommended for control of mulberry popcorn disease, because any single method is seemed not sufficient enough. However, natural plant extracts mixture is recommended as a product to control of mulberry Sucker.

• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1389-1402
• /
• 2013

This paper focuses on the impacts of waste dumping on inorganic nutrients in the dumping area of the Yellow Sea, and the effect of an governmental regulation of pollution in dumping areas. The environmental variables and parameters of the dumping and reference areas in the Yellow Sea were measured during July 2009 and analyzed. In addition, the analyzed data for inorganic nutrients over the last 10 years were obtained from the Korea Coast Guard (KCG) and the National Fisheries Research and Development Institute (NFRDI). The chemical environment of the study area revealed increases in concentrations of inorganic nutrients, Chemical Oxygen Demand (COD), and Volatile Suspended Solids (VSS) in the bottom layer. On the contrary, the pH level was decreased. Most notably, the time series data of inorganic nutrients showed gradual increase over time in the dumping area, and thus, the oligotrophic waters trend toward eutrophic waters. The increases appears to be due to the disposal of large amounts of organic waste. In recent times, the wastes disposed at the area were largely comprised of livestock wastewater, and food processing waste water. The liquefied waste, which contains an abundance of nutrients, causes a sharp increase in concentrations of inorganic nitrogen in the dumping area. On the one hand, the dumping sites have been deteriorated to such an extent that pollution has become a social problem. Consequentially, the government had a regulatory policy for improvement of marine environmental since 2007 in the dumping area. Hence, the quality of marine water in the dumping site has improved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.400-401
• /
• 2012

그래핀(Graphene)은 열 전도도가 높고 전자 이동도(200 000 cm2V-1s-1)가 우수한 전기적 특성을 가지고 있어 전계 효과 트랜지스터(Field effect transistor; FET), 유기 전자 소자(Organic electronic device)와 광전자 소자(Optoelectronic device) 같은 반도체 소자에 응용 가능하다. 그러나 에너지 밴드 갭이 없기 때문에 소자의 전기적 특성이 제한되는 단점이 있다. 최근에는 아크 방출(Arc discharge method), 화학적 기상 증착법(Chemical vapor deposition; CVD), 이온-조사법(Ion-irradiation) 등을 이용한 이종원자(Hetero atom)도핑과 화학적 처리를 이용한 기능화(Functionalization) 등의 방법으로 그래핀을 도핑 후 에너지 밴드 갭을 형성시키는 연구 결과들이 보고된 바 있다. 그러나 이러한 방법들은 표면이 균일하지 않고, 그래핀에 많은 결함들이 발생한다는 단점이 있다. 이러한 단점을 극복하기 위해 자가조립 단층막(Self-assembled monolayers; SAMs)을 이용하여 이산화규소(Silicon oxide; SiO2) 기판을 기능화한 후 그 위에 그래핀을 전사하면 그래핀의 일함수를 쉽게 조절하여 소자의 전기적 특성을 최적화할 수 있다. SAMs는 그래핀과 SiO2 사이에 부착된 매우 얇고 안정적인 층으로 사용된 물질의 특성에 따라 운반자 농도나 도핑 유형, 디락 점(Dirac point)으로부터의 페르미 에너지 준위(Fermi energy level)를 조절할 수 있다[1-3]. 본 연구에서는 SAMs한 기판을 이용하여 그래핀의 도핑 효과를 확인하였다. CVD를 이용하여 균일한 그래핀을 합성하였고, 기판을 3-Aminopropyltriethoxysilane (APTES)와 Borane-Ammonia(Borazane)을 이용하여 각각 아민 기(Amine group; -NH2)와 보론 나이트라이드(Boron Nitride; BN)로 기능화한 후, 그 위에 합성한 그래핀을 전사하였다. 기판 위에 NH2와 BN이 SAMs 형태로 존재하는 것을 접촉각 측정(Contact angle measurement)을 통해 확인하였고, 그 결과 NH2와 BN에 의해 그래핀에 도핑 효과가 나타난 것을 라만 분광법(Raman spectroscopy)과 X-선 광전자 분광법(X-ray photoelectron spectroscopy: XPS)을 이용하여 확인하였다. 본 연구 결과는 안정적이면서 패턴이 가능하기 때문에 그래핀을 기반으로 하는 반도체 소자에 적용 가능할 것이라 예상된다.

• Korean Journal of Environment and Ecology
• /
• v.22 no.6
• /
• pp.658-665
• /
• 2008

One of the characteristics of fluvial river channel with sand bed-material is the existence of movable sand bars not occupied with vegetation. However, sand bars at the Hahoe's reach of the Nakdong River showing a double-meandering channel has been changed into expanding vegetation area. Moreover, sand material, in recent years, has stopped moving to downstream in channel and the number and area of bare bars which did not occupied by vegetation have been decreased. In order to find out the mechanism, we carried out the channel characteristics surveys such as hydro-geomorphologic, soil physio-chemical and vegetation surveys were conducted twice on autumn season in 2005,2006. The results so far achieved showed that the reduced discharge of transported sediment and duration of dry season might be critical factors for the spread of luxuriant vegetation. The vegetation area was significantly expanded by floods exceeding the subsequent dominant flow discharge. Furthermore, the expansion of vegetation area was highly correlated with the supply of organic matter, nutrients and alteration of soil texture by sediment deposition during the flooding event.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.65-70
• /
• 2008

We design and fabricate the 94 GHz Coplanar waveguide(CPW)-to-rectangular waveguide transition that is transmits signal smoothly between the CPW, which is a popular transmission line of the planar circuits, and rectangular waveguide for the 94 GHz transceiver system. The proposed transition composed of the unilateral fin-line taper and open type CPW-to-slot-line transition is based on the hard and inflexible sapphire for the flip-chip bonding of the planar MMICs using conventional MMIC technology. We optimize a single section transition to achieve low loss by using an EM field solver of Ansoft's HFSS and fabricate the back- to-back transition that is measured by Anritsu ME7808A Vector Network Analyzer in a frequency range of $85{\sim}105$ GHz. From the measurement and do-embedding CPW with 3 mm length, an insertion and return loss of a single-section transition are 1.7 dB and more an 25 than at 94 GHz, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.52-61
• /
• 2020

This study developed a legibility distance(LD) model for three colors used in VMS according to luminance under foggy conditions through experiments. For this, a simulated environment was created, and LD values of red, green, and yellow color were collected by increasing the luminance. From the test results, the LDs for red at luminance levels of 2,000 cd/㎡ and 20,000 cd/㎡ and a visibility distance of 10m were 10.2m and 18.8m, respectively, which was an improvement of 84%. The LD was improved by 34% and 17% at a visibility distance of 20 m and 30 m, respectively. For green, the LD was improved by 69%, 63%, and 19% at visibility distance of 10m, 20m, 30m, respectively. For yellow, the LD was improved by 100%, 47%, and 36% at visibility distance of 10m, 20m, 30m, respectively. The LD models for three colors were developed by using two independent variables, luminance value and visibility distance. The adjusted coefficients of the red, green, and yellow model equations were calculated as 0.982, 0.978, and 0.915, respectively, and the explanatory power of all models was very high.

• Journal of Distribution Science
• /
• v.13 no.9
• /
• pp.47-57
• /
• 2015

Purpose - The aim of this paper is to investigate the explanatory power of the Pecking-order theory (the cost of financing increases with asymmetric information) among Korean retail firms from the perspective of debt capacity. According to the Pecking-order theory, a firm's first preference is to use internal funds for its capital needs, its next preference is the issuance of debt, and its last preference is the issuance of equity; this is due to the information asymmetry problem between existing shareholders and investors. However, prior empirical studies, such as Lemmon and Zender (2010), argue that the entire sample test for the Pecking-order theory could be misleading due to the different levels of debt issuance capability of each of the individual firms; in fact, they confirm that the explanatory power of the Pecking-order theory improves after taking into account the differences in debt capacity of the U.S. firms they examined. This paper implements a case study approach among Korean retail firms to examine the relationship between debt capacity and the explanatory power of the Pecking-order theory in Korea. Research design, data, and methodology - This study uses the sample of public retail firms on the Korea Composite Stock Price Index (KOSPI) from the time period of 1990 to 2013. We gather related financial and accounting statements from the financial information firm WISEfn. Credit rating information is provided by the Korea Investor Service. We employ the models of Lemmon and Zender (2010) and Son and Kim (2013) to measure a firm's debt capacity. Their logit models use the rating dummy variable as a dependent variable and incorporate other firm characteristics as independent variables to estimate debt capacity. To test the Pecking-order theory, we adopt variants of the financing deficit model of Shyam-Sunder and Myers (1999). In the test of the Pecking-order theory, we consider all of the changes in total debt obligations, current debt obligations, and long-term debt obligations. Results - Our main contribution to the literature is our confirmation of the predicted relationship between debt capacity and the explanatory power of the Pecking-order theory among Korean retail firms. The coefficients on financing deficits become greater as a firm's debt capacity improves. This is consistent with the results of Lemmon and Zender (2010). The coefficients on the square of the financing deficits are also negative for the firms in the largest debt capacity group, which is also consistent with the predictions in prior literature. Conclusions - This study takes a case study approach by examining Korean retail firms. We confirm that the Pecking-order theory explains the capital structure of retail firms more appropriately, after taking into account the debt capacity of each firm. This result suggests the importance of debt capacity consideration in the testing of the Pecking-order theory. Our result also implies that there has been a potential underestimation of the explanatory power of the Pecking-order theory in existing studies.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.1
• /
• pp.25-31
• /
• 2018

In this study, the differences of holding power according to the shape and weight distribution of concrete weight used in shellfish shell fishery were investigated through the experiments. To investigate the differences in shape, five bar-shaped concrete weights with the same length and different cross-sectional shapes were produced. The sectional shape of each weight was square, triangle, circle, small cross, and large cross (SQ, TR, CI, CR-S, CR-L). Ten rectangular parallelepiped weights with different bottom area and cross-sectional area were produced. To investigate the differences by the weight distribution, the holding power on the square model (SQ) with six 50 g weights at different positions was investigated. All the holding power was obtained by measuring the tensile force generated when the concrete weight was pulled at a constant speed on the sand. As a result, there were no differences in holding power between the ten rectangular weights. However, the experiment on weights with different cross-sectional shapes showed differences in holding power. The holding power was higher in the order of CR-L > CR-S > CI > TR > SQ. In the weight distribution test, the holding power was higher as the front side of the weight was heavier. Generally, the frictional force is the same even if the shape is different, when two objects have the same value in the weight and the roughness. On the other hand, it seems to have a large impact when the shape of the bottom is deformed in the course of pulling the object. Particularly, the larger the degree of protrusion like cruciform weights, the more the holding power increased while deeply digging the bottom. It is also likely that the holding power increases as the front weight increases.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.288-296
• /
• 2016

A 400km/h simple catenary system was constructed as a test line in Korea. In the design stage of this system, the pre-sag was one of the engineering issues most focused on. It is known that the pre-sag improves the current collection performance in a certain band of high speed. However, the effect of pre-sag at 400km/h has not yet been established. To grasp a better pre-sag in the 400km/h catenary, we transacted the dynamic performance prediction simulation between catenary and pantograph under conditions of 0 and 1/3000 pre-sag. The level of 0 pre-sag was adapted for the 400km/h catenary design after reviewing predictions. We constituted the 1/3000 pre-sag sample section (about 1km) while constructing the 400km/h catenary test-bed (28km) of 0 pre-sag. With a HEMU-430X train, the contact forces were measured in the test-bed including the pre-sag sample section. In this paper, the predicted and measured dynamic performance values (contact forces) for 0 and 1/3000 pre-sag are described and compared. It is conclusively confirmed by analytical and experimental examination that the non pre-sag showed better dynamic (current collection) performance than that of the 1/3000 pre-sag for the 400km/h catenary system.