• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.119-122
• /
• 2008

Radioiodine (I-131) Therapy has been known one of the methods treated with hyperthyroidism and thyroid tumor, using a separate ward. This technique has been already used for several decades, and its clinical efficacy proven. Today, Radioiodine takes a form of capsule through continuous development, so, 30 odd domestic hospitals run about 63 separate wards. And, its demands would increase continuously; because of tending upwards the patients had thyroid cancer. However, various kinds of wastes originate from a procedure of radioiodine therapy. Especially, when their radioactivity exceed permissible level (4 Bq/$cm^2$) set by Nuclear laws of the Republic of Korea, it regards as radioactive wastes, then, managed separately from origination to the last disposal.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.135-147
• /
• 2005

As automobile technology advances, a smoother ride with less noise is desired. In order to achieve these purposes, a study on the vibration and noise produced by a moving automobile was carried out and a model for tire vibration characteristics which influence the ride performance was developed. The model was verified through simulations and experiments. The developed model was then applied to a half car model and automobile vibrations were analyzed. The effects of tire design parameters on the automobile vibration energy were investigated. The results from laboratory and field tests confirm the validity of the analytical model. The 17-DOF half-car model was built to analyze automobile vibration. The characteristics of the nonlinear model for a shock absorber were applied to this model. The results from the present 17-DOF half car model incorporating the analytical tire model with tire design parameters, were compared with the 5-DOF half car model where the tire was modeled with linear springs. The results of the 17-DOF model are close to the experimental results. Using the 17-DOF model, the influence of tire design parameter were considered. According to the analysis results, the vibrations at seat/body/wheel were predicted by simulation and experiment.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.1
• /
• pp.31-40
• /
• 1997

원자로 압력용기 재료의 중성자 조사 취화 문제는 원자력발전소의 안전성 및 수명 관리에 가장 중대 한 영향을 미친다. 재료의 조사 취화를 평가하기 위하여 수행하고 있는 충격 및 인장시험 같은 파괴적 시험 결과는 석출물 크기나 분포, 전위 밀도 등, 재료 자체의 조직학적 특성에 좌우되므로 한정된 시편을 이용한 평가에는 많은 불확실성이 존재하게 된다. 따라서 이와 같은 문제점을 해결하기 위하여 비파괴기술을 이용한 조사 취화 평가에 대한 많은 연구가 진행되고 있다. 현재 원자로 압력용기 재료의 조사 취화에 따른 미세 조직 변화를 분석하기 위하여 응용되고 있는 비파괴기술로는 전기, 자기, 전자기, 초음파 및 경도측정법 등이 있으나 비파괴피험 결과와 미세조직의 변화, 기계적 성질 및 취화 정도 등과의 상관 관계를 정립해야만 기존 파괴적 시험의 대체가 가능하게 된다. 따라서 현재까지 수행되고 있는 여러 비파괴기술을 이용한 조사 취화 평가 연구결과를 비교 분석하여 보다 실현 가능성 있는 비파괴기술을 검토하였다.

• Korean Journal of Organic Agriculture
• /
• v.12 no.2
• /
• pp.209-217
• /
• 2004

The aim of this experiment was to investigate the effects of applying times and dilution rates of cattle slurry on dry matter yields of orchard grass. Cattle slurry was applied at the rates of average mineral nitrogen fertilizer equivalent to 150 kg/ha/year in 3 cutting frequency. Significantly higher dry matter yields than that of no fertilization (3.04 ton DM/ha) were recorded in the application of diluted cattle slurry(5.38~6.25 ton DM/ha) (p<0.05). Especially, this tendency was shown with higher annual dry matter yields at the partitioned dressing times, such as at the applications for 1st and 2nd growth, 1st and 3rd growth, and 1st, 2nd and 3rd growth respectively. The yields of annual dry matter both at fertilizing phosphorus and potassium, and phosphorus, potassium and nitrogen were higher than no fertilization as 5.41 tons and 8.78 tons per ha respectively. However, with application of diluted cattle slurry, dry matter yield par year (5.84 ton DM/ha) was higher than those of fertilizing phosphorus and potassium. The efficiencies of dry matter production with mineral and cattle slurry nitrogen application (kg DM/kg N) were 225 and 15.8~18.7 kg DM/kg N respectively. Especially, these tendencies were higher in diluted application plots than in no-diluted application plots of cattle slurry.

• Journal of the Korean Society for Heat Treatment
• /
• v.2 no.4
• /
• pp.27-39
• /
• 1989

The effect of gas mixing ratios during gas nitrocarburizing treatment on the formation of compound layer and the mechanical properties has been studied for hot work tool steel by using a combined heat treating technique. The thickness of compound and diffusion layers has been shown to grow as a parabolic relation with increasing the amount of ammonia at a given flow quantity of $CO_2$ gas. The compound layer consists mainly of ${\varepsilon}-Fe_3$(C, N) with small amounts of ${\gamma}^{\prime}-Fe_4N$ and ${\alpha}$-Fe. The combined heat treated hot work tool steel has shown that the thickness of compound layer increases with increasing nitrocarburizing time, but the rate of growth slows down as gas nitrocarburizing time goes more than two hours. Tensile properties have given a remarkable improvement. In particular, the wear resistance of combined heat treated hot work tool steel has exhibited an improvement of about 165% greater than that obtained from conventional quenching and multi-tempering treatments.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.3
• /
• pp.161-168
• /
• 1996

The purpose of this study is to investigate the effect of impurity level and fabrication processes on the strength, fracture toughness and fatigue resistance of 7075, 7050 and 7175 high strength aluminum forgings. It has been verified that plane strain fracture toughness and fatigue characteristics of a specially processed 7175S-T74 alloy is superior to a conventionally processed 7075-T6/T73, 7050-T74 and 7175-T74 alloys. These beneficial effects primarily arise from two view points, i.e., the effect of reducing the impurity level of iron and silicon has significantly diminished the size and volume fraction of second phase particles such as $Al_7Cu_2Fe$ and $Mg_2Si$. Futher reduction of the amount of nonequilibrium second phase particles has been observed by applying a special fabrication process.

• The Journal of the Korean Society for Microbiology
• /
• v.10 no.1
• /
• pp.19-24
• /
• 1975

Anaerobic bacteria are the major residents of human skin and mucous membrane. The importance, as opportunistic pathogens, of anaerobic bacteria are well recognized because of more population. with decreased defense against bacterial invasion due to chemotherapy, rediation therapy, extensive surgical operation etc. are dealt at hospitals. An analysis of the anaerobe isolation results at Yonsei University Medical Center during the January 1974-May 1975 period was made and the following results were obtained. 1) From 118 patients 146 strains of anaerobes were isolated. Among these 81.3% were nonsporforming anaerobes. Most frequently isolated anaerobes were Pc. asaccharolyticus, Ps. anaerobius, Ps. intermedius, B. fragilis and Cl. perfringens. 2) Anaerobes were frequently isolated from wound, female genital, intraabdominal, and pleuropulmonary specimens. Fewer anaerobes were isolated from blood, spinal fluid and liver specimens. 3) The ratio of anaerobe isolation to total bacteria isolation were; liver 66.7%, intraabdominal 33.3%, pleuropulmonary 28.9%, spinal fluid 5.0% and blood 4.2%. 4) Among the 118 anaerobe isolated patients, 48.3% yielded anaerobes only and rest of them yielded anaerobes together with aerobes. 5) Most of the gram-positive anaerobes were susceptible to the antibiotics tested. Exception was to tetracycline to which appreciable number showed resistance. It was noteworthy that only 48% of B. fragilis was susceptible to tetracycline.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.7-10
• /
• 2012

최근 고층건물 화재의 대표적 사례인 부산 해운대 우신골드스위트 주상복합건물 화재 확대의 주요 원인으로 작용했던 석유화학제품 중 배관보온재를 감싸고 있는 보온필름의 화재특성에 대해 연구를 하였다. 본 화재결과 배관보온필름이 화재취약성을 가지고 있는 것으로 확인되었다. 하지만 명확한 법적규제가 없는 것과 시공비 절감을 위해 대부분의 공사업자들은 비난연제품으로 시공을 하고 있는 실정이다. 따라서 본 연구에서는 이러한 잘못된 시공으로 인한 위험성을 알리고자 하는데 목적이 있다. 연구방법은 국내에서 생산된 마감용 배관 보온필름 네 종류를 사용하여 화재특성을 분석하였다. 네 종류 중 두 종류는 난연성능이 있는 제품이고 나머지 두 종류는 난연성능이 없는 제품으로 선정하였다. 실험은 제품의 열방출률을 알기위해 콘칼로리미터를 사용하였고 또한 실제 피트 내에 배관보온필름 화재를 묘사하기 위해 45도연소시험기를 사용하여 연소실험을 하였다.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.3
• /
• pp.358-368
• /
• 2008

The purpose of this study is to gather background data of teacher's performance of the fisheries and shipping industries high schools. This data will provide direction for advancing teacher's performance of the fisheries and shipping business high school,s by investigating and analyzing variables related to teacher's performance. This study focused on the opinions of thirty teachers within the fisheries and shipping business high schools. The conclusions of the study were as follows: First, teachers continually seek goal achievement, rewarding jobs, and a feeling of self-worth. However, it was found that male teachers have stronger task performing ability and form stronger relationships with their partners than female teachers. Second, it was shown that teachers have a much higher percentage of ability to teach. Particularly, male teachers are generally higher than female teacher. Third, it was shown that teachers have a much higher percentage of ability to teach, but it is required that they both get equal participation opportunity as there is a little difference between male teachers and female teachers. Fourth, it was found teachers exhibited a lower percentage rate of ability to manage activities, and required further development of programs for expansion of professionalism of this field.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.307-314
• /
• 2007

FDS (Franchise Distributed System) which can efficiently control and manage the resources like food, liquid and services is required in many distributed system related areas like SCM (Supply Chaining Management) and ECR (Efficient Consumer Response). But, established system, such as used PC and Internet or CTI (Computer Telephony Integration) that need other equipment and expenses. And these have many problems, as voices record or recognition, not spreaded. To solve those problems, we design and implemented Web Card Checker for Franchise Distribution. Our system used card checker machine, not make additions, which can order raw materials like SCM as well as managed distributed processes.