• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.727-732
• /
• 2017

This paper describes the dynamic characteristics depending on installation condition between a pantograph and an OCL (Overhead Contact Line) on a new high speed line in Korea. The current collection performance between the pantograph and the OCL was tested during train operation from Suseo to Jije stations. The current collection performance is evaluated based on the duration of an arc by using an arcing measurement system. The system consists of an optical sensor for measuring the duration of an arc and a camera for monitoring current collection performance. An arcing duration is defined as a percentage of arcing in international standards. This test aims to analyze the locations of repetitive arcing depending on installation conditions of OCLs on a new high speed line in order to use the result as reference data for correct construction and maintenance.

• Preventive Nutrition and Food Science
• /
• v.13 no.4
• /
• pp.354-361
• /
• 2008

A novel bacterium isolated from Cheonggukjang was identified as a glutamate-dependent Bacillus subtilis HA with 98.3% similarity to Bacillus subtilis Z99104. Optimization of poly-$\gamma$-glutamic acid ($\gamma$-PGA) production by modulating fermentation factors including carbon sources, nitrogen sources, inorganic salts and fermentation time was investigated. Optimum culture broth for $\gamma$-PGA production consisted of 3% glutamate, 3% glucose and various salts, resulting in the PGA production of 22.5 g/L by shaking culture for 72 hr at $37^{\circ}C$. Average molecular weight of $\gamma$-PGA was determined to be 1,220 kDa through MALLS analysis. The $\gamma$-PGA solution showed a typical pseudoplastic flow behavior, and a great decrease in consistency below pH 6.0 regardless of the same molecular weight of $\gamma$-PGA. The molecular weights of isolated $\gamma$-PGA were drastically decreased by heat treatment in various acidic conditions, resulting in different hydrolysis of $\gamma$-PGA. The consistency of $\gamma$-PGA solution was greatly decreased with increase heating time in acidic conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.8
• /
• pp.1138-1144
• /
• 2012

This study was conducted to evaluate the efficacy of the dipeptide form of phenylalanine as a new source of amino acid in terms of growth performance and whole-body amino acid composition in comparison to the free form for red seabream (Pagrus major). Fish ($1.46{\pm}0.001g$) were fed four isonitrogenous and isocaloric experimental diets containing 0.7 or 1.4% phenylalanine either in free or dipeptide form. A feeding trial was carried out in three replicates and the fish were fed to apparent satiation for six weeks. At the end of the feeding trial, feed intake of fish was influenced by both phenylalanine form and level and significantly higher values were obtained at an inclusion level of 0.7% and by the use of dipeptide form. However, the other growth parameters did not significantly differ among treatments. Whole-body amino acid compositions revealed no significant changes in concentrations of both essential and non-essential amino acids regardless of the increase in phenylalanine levels or the use of its different forms. The finding in this study indicates that juvenile red seabream can utilize dipeptide phenylalanine as efficiently as free form without any undesirable effects on growth performance or whole-body amino acid composition.

• Journal of Mechanical Science and Technology
• /
• v.18 no.12
• /
• pp.2204-2208
• /
• 2004

Ti-8Ta-3Nb has been developed as a new biomaterial. The experimental specimens are as-cast and forged Ti-8Ta-3Nb alloys. Treatment in a solution, ranging from 760 to 960$^{\circ}C$ has carried out. The microstructural research has carried out after the solution treatment and the hardness was measured. The specific heat and the length variations of Ti-8Ta-3Nb were also measured. The optimum temperature for the solution heat treatment of Ti-8Ta-3Nb was found to be 880$^{\circ}C$. This was based on the mechanical properties and the volume fraction of ${\alpha}$ phase and their phases shown from the results of the solution heat treatment. From the results, the ${\beta}$ transition temperature of Ti-8Ta-3Nb was found to be between 860$^{\circ}C$ and 880$^{\circ}C$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1907-1916
• /
• 2003

During decades, there has been much progress in understanding of the inelastic behavior of the materials and numerous inelastic constitutive equations have been developed. The complexity of these constitutive equations generally requires a stable and accurate numerical method. To obtain the increment of state variable, its evolution laws are linearized by several approximation methods, such as general midpoint rule(GMR) or general trapezoidal rule(GTR). In this investigation, semi-implicit integration schemes using GTR and GMR were developed and implemented into ABAQUS by means of UMAT subroutine. The comparison of integration schemes was conducted on the simple tension case, and simple shear case and nonproportional loading case. The fully implicit integration(FI) was the most stable but amplified the truncation error when the nonlinearity of state variable is strong. The semi-implicit integration using GTR gave the most accurate results at tension and shear problem. The numerical solutions with refined time increment were always placed between results of GTR and those of FI. GTR integration with adjusting midpoint parameter can be recommended as the best integration method for viscoplastic equation considering nonlinear kinematic hardening.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1856-1863
• /
• 2003

Overlay model had several advantages to describe hysteretic behavior of material and showed good capability for many engineering materials. However, this model is only applicable to material obeying Masing postulate. Some materials such as 316L stainless steel do not follow Masing postulate and show cyclic hardening(or softening) and strain range dependence. Low cycle fatigue tests of 316L stainless steel at 600$^{\circ}C$ were performed to investigate the characteristics of cyclic behavior of non-Masing material. From all tests cyclic softening was observed. There were differences in elastic limit of hysteresis loop according to applied strain range. To consider these features, modified overlay model was developed. Yield stresses of subelements were divided into isotropic and anisotropic part to describe the non-Masing behavior. The plastic strain range memorization was introduced to consider the strain range dependence. The prediction using modified overlay model showed a good accordance to actual hysteresis loops.

• Journal of Distribution Science
• /
• v.14 no.7
• /
• pp.33-44
• /
• 2016

Purpose - This study aims to provide domestic franchise coffee shops with useful information by analyzing the impact of servicescape and the ability to provide service on the customer satisfaction and loyalty in franchise coffee shops in Seoul. Research, data, and Methodology - The data were collected for a month from 1^st in February, 2016 through judgement sampling. Then, the available collected data were analyzed with SPSS 19.0 package. Results - The results from this study are as follows. First, the servicescape factors, which have impact on a franchise coffee shop's customer satisfaction, are determined to be interior, cleanliness and coziness. Next, the ability to provide service affects customer satisfaction. Third, servicescape factors have impacts on customer satisfaction. Also, the service from a coffee shop affects customer loyalty. Therefore, a customer's satisfaction through services of a coffee shop has an impact on customer loyalty. Conclusions - It is important to have not only the ability to provide service but also servicescape factors, such as interior, cleanliness and coziness in order to be distinct from other competitors. These difference might create customer satisfaction and retention which will bring profits.

• Journal of Distribution Science
• /
• v.10 no.9
• /
• pp.23-29
• /
• 2012

Purpose - The main purpose of this study is to find consumers' usage behavior in mobile services. To achieve these research goals, we empirically estimate the relationship between characteristics related to the use and provision of mobile services and factors influencing consumers' intentions. Research design / data / methodology - This study based on TAM, in which behavior is seen as a consequence of affect and intentions and used the theory of consumption values which is a means of explaining user decisions to employ a utilitarian and hedonic facet using by smart phone. Results - The result of the study verified that specific factors, such as expectations about pleasure and monetary value, had the biggest influence on the service usage pattern of mobile consumers. And typically, when consumers are expected to monetary damages, it will be avoided. However, in result of this study, it was found that mobile service users pay a high cost, but they are in pursuit of pleasure and fun. Conclusions - These results, a variety of applications in the mobile service are being provided to users. As information technology has developed, companies should have providing diverse application programs and good quality of services with advanced information technology.

• Clinical and Experimental Pediatrics
• /
• v.56 no.5
• /
• pp.227-230
• /
• 2013

Chronic pancreatitis is a progressive inflammatory disease resulting from repeated episodes of acute pancreatitis that impair exocrine function and eventually produce endocrine insufficiency. Some causes of chronic pancreatitis appear to be associated with alterations in the serine-protease inhibitor, Kazal type 1 (SPINK1), cationic trypsinogen (PRSS1), and cystic fibrosis-transmembrane conductance regulator (CFTR ) genes, or with structural disorders in the pancreaticobiliary ductal system, such as pancreatic divisum or anomalous pancreaticobiliary ductal union (APBDU). However, it is unusual to observe both genetic alteration and structural anomaly. Here, we report 2 cases with both APBDU and a mutation in the SPINK1 genes, and we discuss the implications of these findings in clinical practice.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.1
• /
• pp.68-74
• /
• 1997

One hundred and eighty two lactic acid bacteria, isolated mainly from kimchi, including reference strains were examined for their ability to utilize 95 carbon sources. The test strains were assigned to 5 major, 1 minor and 12 single-membered clusters based on the $S_{SM}$, UPGMA algorithm (at similarity of $80{\%}$). These aggregate clusters were equivalent to the genus Leuconostoc (aggregate cluster M and N), the genus Lactobacillus (aggregate cluster Q and R), and the genera Lactobacillus and Leuconostoc (aggregate cluster O and P) according to the database of the Biolog system. This study demonstrates that rapid identification and classification of isolates originating from kimchi can be achieved on the basis of such carbon source utilization tests.