• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.3
• /
• pp.307-312
• /
• 2001

Ultrasonic signals from Charpy impact test specimen have been analyzed in order to evaluate the integrity of reactor pressure vessel. Base and weld metal that were extracted from reactor vessel doting plant outages according to the schedule of the surveillance test required by the related regulations have been used and the ultrasonic test parameters including velocity, attenuation, etc. showed a close correlations with the amount of neutron irradiation for base metal, relatively homogeneous materials. This result showed certain possibility where a nondestructive method could be used to predict the fluence of the Irradiation due to neutron in nuclear reactor vessel materials.

• Korean Journal of Organic Agriculture
• /
• v.24 no.2
• /
• pp.263-272
• /
• 2016

The present study investigated the effect of inclusion of chromium propionate (Cr-P) and lysophopholipid (LPL) in diet on blood parameters and meat quality of Hanwoo steer. Feeding trial was performed from late fattening period to slaughter and blood parameters (insulin, blood glucose and non-esterified fatty acid (NEFA) concentration) and meat quality were examined. Total 4 experimental groups including control (no addition), T1 (Cr-P 0.2%), T2 (LPL 0.2%) and T3 (Cr-P 0.1% + LPL 0.1%) were employed. For blood parameters, insulin concentration in T1 and T3 showed an elevating patterns from $3.13{\mu}U/mL$ to $3.35{\mu}U/mL$ (T1) and from $4.38{\mu}U/mL$ to $5.23{\mu}U/mL$ (T3). The changes of NEFA in all groups were detected as a decreasing patterns according to days of feeding. However, significant difference was not found. In growth performance, T2 showed greater daily gain and T1 showed greater carcass yield compared to others. However, there were no significance in difference. In meat quality, T1 showed greater yield and intra-muscular fat levels and lower sharing force compared to others. However, significant differences were not detected.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2008.12a
• /
• pp.133-138
• /
• 2008

1) 두과작물의 생초수량과 건물수량은 작물별로 차이가 컸다. 지상부는 Red clover가 생초수량 38.6 ton/ha, 건물수량 7.86 ton/ha로 가장 많았으며, 지하부 또한 Red clover가 생초수량 30 ton/ha, 건물수량 6.2 ton/ha로 가장 많았다. 2) CP 수량 및 TDN 수량은 Red clover가 각각 1 ton/ha, 4.6 ton/ha로 유의하게 높았으며 NDF와 ADF는 수확시기가 늦을수록 높은 경향을 나타내서 Galega와 Cicer milk vetch가 가장 높았다. 또한 상대사료가치(RFV)는 공시품종 대부분이 100 이상을 나타내어 사료가치가 우수하였으며 Yellow blossom sweet clover, Crimson clover, Hairy vetch 등은 151% 이상으로 1등급에 속하였다. 3) 가축사육능력은 $K_{cp}$(2.18 head/ha/yr) > $K_{TDN}$(1.25 head/ha/yr) >K(0.04 head/ha/yr) 순으로 높게 나타났으나 이는 상당히 낮은 수준이었으며 이는 두과작물의 적은 수량으로 인한 결과라 판단되어진다. 4) 두과작물과 화본과작물 혼파시 $K_{cp}$ $K_{TDN}$ 모두 두과작물 평균 2.18, 1.25보다 높았다. 또한 Rye-Galega 8:2 비율, Rye-Winter pea 7:3 비율에서 건물수량, $K_{cp}$ $K_{TDN}$이 화본과 단파시보다 증가하여 혼파효과가 인정되었다. 특히 건물수량과 $K_{TDN}$ 관계에서 혼파 비율에 따라 건물수량에 큰 차이를 보이지 않은 반면 $K_{TDN}$은 모든 비율에서 증가하여 사료가치가 상승하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.2
• /
• pp.14-22
• /
• 1995

We treat the vibrations of circular beam and make use of the method employed by J.T.Tielking, which is based on the principle of Hamilton. The Hamilton's principle requires the determinations of the potential and the kinetic energy of the model as well as done by internal pressure forces. Thje potential energy is composed of a part due to elastic deformations of the beam and a part due to radial and tangential displacements of the tread band with respect to the wheel rim. The equations of motion for such a model are derived by reference to conventional energy method. The accuracy of the expressions is demonstrated by comparison of calculated and experimental natural frequencies for circular beam. The circular beam experiences a harmonic, radial excitat- ion acting at a fixed point on the beam. Modal parameters varying the inflation pressure and load are determined experimentally by using the transfer function method.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.84-91
• /
• 2002

The shaft with the circular cross section have symmetric structural combination parts to keep the rotating balance. Hence the crack usually emanate from symmetric combination parts due to the stress concentration of these parts. In this study to estimate the fatigue behavior of symmetric cracks, the fatigue test was performed by using rotary bending tester and the specimen with symmetric defects in circular cross section. From the facts the characteristics of crack initiation and propagation on the symmetric surface cracks in circular cross section was examined. Also we observed the internal crack using oxidation coloring and investigated the fatigue behavior using the relationship between surface crack and internal crack. As a result of fatigue lift of symmetric cracks was reduced to 35% compared to single crack’s. We examined the characteristics of fatigue behavior in element with symmetric cracks using internal crack propagation rate and maximum stress intensity factor range obtained from approximation method.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.179-186
• /
• 2002

This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding farce and the punch load. As a result. if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum vague of process variables.

• KSTLE International Journal
• /
• v.3 no.1
• /
• pp.60-67
• /
• 2002

Wear on the tube-to-spring contact is investigated experimentally, The vibration of the tube causes the wear while the springs support it As for the supporting conditions, the contacting normal farce of 5 N,0 N and the gap of 0.1 mm are applied. The gap condition is for considering the influence of simultaneous impacting and sliding on wear. The wear volume and depth decreases in the order of the 5 N,0 N and the gap conditions. This is explained from the contact geometry of the spring, which is convex of smooth contour, The contact shear force is regarded smaller in the case of the gap existence compared with the other conditions. The wear mechanism is considered from SEM observation of the worn surface. The variation of the normal contact traction is analysed using the finite element analysis to estimate the slip displacement range on the contact with consulting the fretting map.

• Journal of Veterinary Clinics
• /
• v.32 no.1
• /
• pp.98-100
• /
• 2015

A 10-year-old intact female Chihuahua weighing 2 kg was presented for complaint of forelimb lameness with non-weight bearing posture. Greater tubercle was palpated medial to its normal location on palpation and crepitation was intermittent with manipulation. On radiographic examination, left medial scapulohumeral joint luxation was found. Bilateral medial patellar luxations also were found and evaluated as grade III. Surgically, the medial scapulohumeral joint luxation was reduced with transposition of the tendon of the biceps brachii muscle. The patient's gait became normal and non-weight bearing posture was resolved at 6 weeks postoperatively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.4
• /
• pp.360-370
• /
• 1992

In order to analyse the mesh selectivity for the trawl net, the fishing experiment was carried out by the training ship Saebada belonging to the National Fisheries University, in the Southern Korea Sea and the East China Sea from June 1991 to August 1992. The trawl net used in the experiment has the trouser type of cod-end with cover net and the mesh selectivity in the cod-end part. In this report, the species of fishes caught and the catch rate for them in accordance with different mesh sizes were analysed, and the result obtained are summarized as follows: 1) 145 species of aquatic animals were caught in totally 138 times of trawl operations. 2) The number of species mostly not to escape are 28, 22, 19, 16 and 11 respectively, in each opening mesh size, 51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm of cod-end. 3) In view that the use of the opening mesh size above 54mm in cod-end of trawl net in Korea, it is necessary to device a counterplan against the overfishing, for the 22 species of aquatic animals mostly not to escape in the cod-end of the large mesh sizes more than 70.2mm.

• The Journal of the Korean Society for Microbiology
• /
• v.16 no.1
• /
• pp.29-34
• /
• 1981

Species and antimicrobial susceptibility of nonfermenting gram-negative bacilli(NFB) isolated from clinical materials at Yonsei Medical Center during the period of September 1980 to August 1981 were analyzed and the following results were obtained. 1. NFB were isolated from 17.1% of sputum, 14.8% of pus, 5.0% of urine, 3.3% of throat and 1.4% of blood specimens. 2. Among the isolates 57.6% were Pseudomonas aeruginosa and 32.7% were Acinetobacter calcoaceticus. P. maltophilia and P. cepacia were 3.2% and 2.8% respectively. Other bacteria were rarely isolated. 3. The monthly isolation rates were high during the June to November period(8.8-12.0%), and low during the December to May period(4.2-8.4%). 4. Many of the isolates showed resistance to various antimicrobials. Although there were variations depending on the bacterial species, amikacin, colistin, gentamicin, tobramycin and co-trimoxazole showed more antibacterial activities than other antimicrobials.