• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1273-1278
• /
• 2007

The cement-asphalt mortar is a mixture of cement and asphalt emulsion, and is utilized as a underpouring materials for the railway track which is used to fill under slab panel space so as to provide a stabilized track support and a tool for reduction of noise and vibration. To increase the workability of grouting, this study investigates the effect of temperature on cement-asphalt mortar by analyzing its physical and mechanical properties before/after hardening according to the temperature (10, 15, 20, 25, $30^{\circ}C$). According to the test results, it is found that as for the physical property of fresh cement-asphalt mortar the more mixture temperature become higher or lower, the more fluidity become worse. But by increasing reducing agent amount and its unit quantity, the required fluidity is met. The compressive strength as physical property of hardened cement-asphalt mortar become lower when temperature is lower but taking it by and large the physical properties of cement-asphalt mortar before/after hardening aren't so affected by temperature and well satisfy the requirement. And it has proved that rate of expansion and freezing and thawing resistance aren't affected by temperature.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2006.04a
• /
• pp.472-473
• /
• 2006

• Journal of Sensor Science and Technology
• /
• v.20 no.6
• /
• pp.368-374
• /
• 2011

A microfluidic device for real-time monitoring of residual free chlorine and pH in water based on optical absorption is proposed. The device consists of a serpentine micromixer for mixing samples with a reagent, and a photodiode and light emitting diode(LED) for the detection of light absorbance at specific wavelengths, determined for specific reagent combinations. Spectral analyses of the samples mixed with N, N'-diethyl-p-phenylenediamine(DPD) reagent for chlorine determination and bromothymol blue(BTB) for pH measurement are performed, and the wavelengths providing the most useful linear changes in absorbance with chlorine concentration and pH are determined and used to select the combination of LED and photodiode wavelengths for each analyte. In tests using standard solutions, the device is shown to give highly reproducible results, demonstrating the feasibility of the device for the inexpensive and continuous monitoring of water quality parameters with very low reagent consumption.

• Korean Journal of Pharmacognosy
• /
• v.25 no.4 s.99
• /
• pp.363-367
• /
• 1994

For developing plant anti-inflammatory agents, extracts from Lonicera japonica were obtained and evaluated for their anti-inflammatory and analgesic activities using acute/chronic inflammatory models and writhing tests. It was found that the extracts with a modified extraction method showed higher anti-inflammatory and analgesic activities than those of the extracts based on the ancient literatures.

• The Plant Pathology Journal
• /
• v.16 no.5
• /
• pp.286-289
• /
• 2000

Mechanol extracts of three cold-tolerant eucalyptus trees-Eucalyptus darlympleana, E. gunnii and E. unigera were screened for antimicrobial activity against twenty two phyto-pathogenic fungi and six food-borne bacterial pathogens. E. unigera showed the antagonistic activity against all the tested pathogens. Among the tested fungal pathogens, Pythium species were highly sensitive to the leaf extracts. Especially, P. vanterpoolii, a causal agent of leaf blight in creeping bentgrass (Agrostis palustris), was completely inhibited by the extracts. The eucalyptus extracts were also effective in inhibiting the fungal growth of Botrytis cinerea and Phomopsis sp. isolated from the lesions of kiwifruit soft rot during post-harvest storage. Escherichia coli O-157 was less sensitive to the inhibition than the other bacterial pathogens tested. It was likely that Gram positive bacteria-Bacillus subtilis and Streptococcus mutans were more sensitive to the eucalyptus extracts than Gram negative bacteria-Escherichia coli, Salmonella enteritidis and Pseudomonas aeruginosa. Our findings suggest that the cold-tolerant eucalyptus species have antimicrobial properties that can serve the development of novel fungitoxic agents or food preservatives.

• Archives of Plastic Surgery
• /
• v.33 no.2
• /
• pp.249-251
• /
• 2006

Human cysticercosis is an infestation with C. cellulosae, the larval stage of the tapeworm T. solium. It prevails in regions of poverty and where personal hygiene is poor. They can lodge in almost any tissue, but cysticerci are most frequently found in brain, skeletal muscle, subcutaneous tissues. We experienced a 41-year old male with $5{\times}12cm$ sized movable non tender brownish hard mass at lateral abdominal wall. The laboratory study didn't show any specific symptoms except peripheral blood eosinophilia and positive parasite ELISA screen for cysticercosis. The ultrasonogram revealed multiple ill-defined mixed echoic inflamatory lesion. Excisied cyst showed multiple severe foul-odor gelatinous subcutaneous mass. Microscopic examination disclosed necrotic body with foreign body reaction, massive eosinophilia and dead parasitic organism, compatible with cysticercosis. There was no evidence of recurrence during 12 months follow-up.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.8
• /
• pp.28-34
• /
• 2010

Railway wheel and axle is the most critical components in railway system. A wheel and axle failure can cause a derailment with its attendant loss of life and property. The service conditions of railway vehicles have become severe in recent years due to a general increase in operating speeds. Therefore, more precise evaluate of wheelset strength and safety has been desired. Fracture mechanics characteristics such as dynamic fracture toughness, fatigue threshold and charpy impact energy with respect to the tread, plate, disc hole of wheel and the surface of press fitted axle are evaluated. This paper describes the difference of fracture toughness, fatigue crack growth and fatigue threshold at the locations of wheel and axle. The results show that the dynamic fracture toughness, $K_{ID}$, is obviously lower than static fracture toughness, $K_{IC}$ and the fracture mechanics characteristics are difference to the location of wheel tread and hole.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.8
• /
• pp.7-12
• /
• 2010

When a vehicle is running, wheel is generating vertical and lateral force on the rail, in addition to load of vehicle, through a complicated set of motions. The derailment coefficient refers to the ratio of lateral force to vertical force(wheel load), and if the value exceeds a certain level, a wheel climbs or jumps over the rail. That's why the value is used as a criterion for running safety. Derailment coefficient of rolling stocks alters according to shape of rail track. I measured three-dimensional angular velocity and acceleration to use 3D Motion Tracker. Test result, derailment coefficient of rolling stocks and shape of rail track examined closely that have fixed relation. Specially, was proved that roll motion has the close coupling relation.

• Proceedings of the KSPS conference
• /
• 2006.05a
• /
• pp.37-40
• /
• 2006

In this paper, we propose a VQ codebook design of speech recognition feature parameters in order to improve the performance of a distributed speech recognition system. For the context-dependent HMMs, a VQ codebook should be correlated with phonetic distributions in the training data for HMMs. Thus, we focus on a selection method of training data based on phonetic distribution instead of using all the training data for an efficient VQ codebook design. From the speech recognition experiments using the Aurora 4 database, the distributed speech recognition system employing a VQ codebook designed by the proposed method reduced the word error rate (WER) by 10% when compared with that using a VQ codebook trained with the whole training data.

• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.445-451
• /
• 2009

The computed tomography(CT) simulation tool provides virtual experimental environment without using a high cost medical equipment. We made teaching materials for the CT simulation tools and educated the students and entry level of radio-technologists. We divided the experimental objects into two groups; students who took only theoretical classes (group 1) and students who took both theoretical and simulation classes (group 2). The results showed that the group 2 outperformed group 1 significantly, which indicates that the simulation program provides a good educational material for not only students but also radio-technologists.