• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.61-73
• /
• 2007

The purpose of this study was to investigate the influence of the muscular endurance on the kinematic factors during a prolonged run. Subjects, 12 males, who were divided into three groups(lower group, general group, and in higher group) after measuring the lower limb's muscular endurance previously. They were asked toe run on the treadmill at 7.4km/h of speed. To analyze the kinematics parameters of the trunk during running, the ProReflex MCU Camera(Qualisys, Sweden) were used. All parameters were sampled from 5 minute, 40 minute, and 60 minute moments during running. An ANOVA with Repeated Measure was used to test the statistic significance between and within groups for all parameters determined with SPSS 11.0. Significance was defined as p<.05. The conclusions were as follows; There was significantly difference within(lapse of running time) groups in the take-off and minimum knee angle event of swing phase of the trunk flexion and extension. In conclusion, the muscular endurance affected on movement of the trunk during a prolonged run. In addition, it showed that there was significant difference in the energy consumption by lapse of running time. Therefore, it seems to be relationships between the muscular endurance and running efficiency.

• Journal of Life Science
• /
• v.8 no.3
• /
• pp.285-293
• /
• 1998

We have cloned an internal fragment of the putative transoisase gene of MLE in the silkworm, Bombyx mori, using PCR method with degenerative oligonucleotide primers designed to represent regions of amino acids encoding transposase. The resulting PCR clone, designed as BmoMAR, cords a partial ORF(152 a.a.) of MLE in which interrupted by five stop codons, and the sequence of its deduced amino acids showed 37% homology with Mos1, an active mariner, from Drosophila mauritiana. Furthermore, the BmoMAR exhibits nucleotide and amino acid homology with 59% and 37% from Apis mellifera and D. mauritiana 7.9 clone, respectively. This result strongly that a MLE is present in the genome of B. mori.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.605-608
• /
• 2004

A novel blue-green emitting aluminum complex was developed by employing 8-hydroxyquinoline as co-ligand for enhancement of electron transport and light emission abilities so that the electroluminescent (EL) devices do not need additional electron transport layer. The aluminum complex (PAlQ) of 8-hydroxyquinoline and ${\alpha}$-pyridoin was synthesized The structure of the PAlQ was elucidated by FT-IR, UV-Vis and XPS. The PAlQ complex showed thermal stability up to 350$^{\circ}C$ under nitrogen flow by TGA. The photoluminescence (PL) was measured from solid film of the PAlQ complex on quartz substrate. The EL device was fabricated by the vacuum deposition. The device having the structure of ITO/TPD/PAlQ/Al was studied, where N,N-bis(3-methylphenyl}-N,N'-diphenyl-benzidine (TPD) was used as a hole transporting layer. The EL device emitted a blue-green light.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.885-888
• /
• 2004

We have prepared and investigated the properties of photoinitiator-free photosensitive polyimide gate insulatos for organic thin-film transistors (OTFTs). The precursor was prepared from a dianhydride, 3,3',4,4'-Benzophenone tetracarboxylic dianhydride (BTDA) and novel aromatic diamine, 7-(3,5-diaminobenzoyloxy) coumarine (DA-CM). Photo-patternability of the polyimide precursor film and surface morphology of the films before and after photo-patterning process were investigated and negative pattern with a resolution of 50 ${\mu}m$ was obtained nicely. In addition, we have fabricated OTFTs with pentacene and photosensitive polyimide as a semiconductor and a gate insulator; respectively. According to the device geometry, the ${\mu}$, current modulation ratio and subthreshold swing of the devices were around 0.2${\sim}$0.4 $cm^2$/Vs, more than $10^5$ and around 3${\sim}$5 V/dec, respectively.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.1
• /
• pp.1-10
• /
• 2007

This study aims to comparison of ultrasonography on both sides of the upper arm of hemiplegic patient. The biceps brachii and deltoid muscle of ten subjects(4 men, 6 women) with stroke were scanned with ultrasonography at the muscle belly at rest at elbow angles of 90 deg. The echogenicity(densit, white area index; WAI) and muscle thickness of ultrasonography was examined using real-time B-mode ultrasonography with 7.5 MHz linear-array prob. In the biceps brachii muscle, MHz there were significant differences of thickness, density, and WAI between affected side and non-affected side. In the deltoid muscle, there were significant differences of thickness, density, and WAI between affected side and non-affected side. Both of the muscles, thickness of the affected side was thin than non-affected side and echogenicity(density, WAI) of the affected side was higher than non-affected side. This study showed that change of skeletal muscle architecture properties occurred in the upper arm of the affected side muscle of hemiplegic patient.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.1
• /
• pp.11-20
• /
• 2007

The purpose of this study were to analysis on quality properties of lower extremity of patient with stroke by the existence of the independent walking. We recruited fourteen adults after stroke(7 male, 7 female; mean age, 64y) for our study. The subjects were divided into two groups; independent walking group(3 male, 3 female) and non-independent walking group(4 male, 4 female). We used in this study included a B-mode ultrasonography scanner with a 7.5 MHz linea probe. During the experiment, the subject was seated in the chair. The echogenicity(density, white area index; WAI) of the tibialis anterior and rectus femoris muscles were measured on both sides of the leg. In both of the density and WAI, the tibialis anterior muscle were significant differences between paratic side and non-paratic side, the independent walking and non-independent walking group. However, in both of the density and WAI of the rectus femoris muscle were only significant differences between paratic side and non-paratic side. This study showed that stroke and the independent walking have influenced on quality properties of lower leg. Especially, the independent walking has influenced on the tibialis anterior muscle.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1197-1202
• /
• 2003

Patterning of biological molecules was attempted on both gold and glass using fourth generation (G4) poly(amidoamine) (PAMAM) dendrimer as an interfacing layer between solid surfaces and biomolecules. As for the patterning of avidin and anti-biotin antibody on gold, PAMAM dendrimers representing amine functionalities were firstly printed onto the 11-mercaptoundecanoic acid SAM by microcontact printing, followed by biotinylation, and reacted with fluorescence-labeled avidin or anti-biotin antibody. Fluorescence microscopic analysis revealed that the patterns of avidin and anti-biotin antibody were well constructed with the resolution of < 2 ㎛. The PAMAM dendrimers were also printed onto aldehyde-activated slide glass and reacted directly with anti-BSA antibodies, which had been oxidized with sodium periodate. As a result, distinct patterns of the anti-BSA antibodies were also obtained with a comparable edge resolution to that of avidin patterns on gold. These results clearly show that PAMAM dendrimers can be adopted as an interfacing layer for the patterning of biological molecules on solid surfaces with micrometer resolution.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.450-450
• /
• 2009

최근 전세계적으로 태양전지의 대량보급에 따라 실리콘 원료의 공급에 차질이 생겨 원자재 값이 상승하는 추세에 있다. 결정질 실리콘 태양전지의 제조비용중 실리콘 재료 및 웨이퍼가 차지하는 비율은 약 50~60%정도로 높기 때문에 실리콘 웨이퍼의 두께를 감소시키는 것이 비용절감을 위한 효과적인 방법으로 기대되고 있다. 그러나 실리콘 웨이퍼의 두께가 앓아질수록 제조공정중 균열이나 파손이 발생할 가능성이 높아지기 때문에 이에 따른 실리콘 웨이퍼의 기계적 물성에 대한 연구가 필수적이라 할 수 있다. 본 연구에서는 현재 상용으로 사용되고 있는 크기가 5 인치인 $200{\mu}m$ 두께의 실리콘웨이퍼 (As-saw)를 약 80여개의 시편으로 절단한 후 각각의 파단강도를 부위별로 측정하였다. 또한 표면절단결함을 제거하는 saw damage etching(SDE) 시간을 제어하여 두께가 $150{\mu}m$, $130{\mu}m$인 웨이퍼를 준비하였다. 이들 시험편에 대해서도 부위별 파단강도를 측정하여 as-saw상태의 시험편과 비교하였다. 파단강도 측정은 4 접 굽힘시험을 통하여 측정하였으며 파단면은 주사전자현미경을 통하여 관찰하였다. 또한 실리콘 웨이퍼의 미세균열을 비파괴적으로 검출하기 위하여 100MHz 고주파수를 이용하는 초음파현미경(SAM, scanning acoustic microscope)을 이용하여 균열의 분포를 영상화하였다.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.9
• /
• pp.427-433
• /
• 2005

In DC tracking power supply system, ground faults are currently detected by the potential relay, 64P. Though 64P relay detects ground fault, it cannot Identify the faulted region which causes long traffic delays and safety problem to passengers. Two new ground fault protective relay schemes that can identify the faulted region are presented in this paper. One is bus differential protective relay and the other is ground overcurrent protective relay. Both type of relays is similar in principle to the ordinary bus differential protective relay and the ground overcurrent relay used in other power system. In DC traction power supply system, since it is ungrounded, ground fault current is not big enough to operate those relays. To solve the problem, a current control device, called device 'X', is newly introduced in both system, which enables large amount of ground fault current flow upon the positive line to ground fault. Algorithms for these relays are developed and their validity are verified by EMTP simulation.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.512-516
• /
• 2003

The study was aimed to saccharify callulosic waste by pectinase produced from strain KL34 isolated from soil. The enzyme activity in the culture using 1%(w/v) fruit waste as carbon source reached to 3.8 U/ml. In the enzymatic hydrolysis of cellulosic waste, we obtained 9.5g/L reducing sugar in the condition of supernatant containing 5 U/ml enzyme and 10%(w/v) apple rind as substrate. Additionally, in enzymatic hydrolysis of food waste using pectinase from KL34, reducing sugar of 12.7g/L was obtained, indicating enhancement of 1.6 fold compared with that of only cellulase employment.