• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.543-544
• /
• 2006

Pentacene thin film transistors fabricated without photolithographic patterning were fabricated on the plastic substrates. Both the organic/inorganic thin films and metallic electrode were patterned by shifting the position of the shadow mask which accompanies the substrate throughout the deposition process. By using an optically transparent zirconium oxide ($ZrO_2$) as a gate insulator and octadecyltrimethoxysilane (OTMS) as an organic molecule for self-assembled monolayer (SAM) to increase the adhesion between the plastic substrate and gate insulator and the mobility with surface treatment, high-performance transistor with field effect mobility $.66\;cm^2$/V s and $I_{on}/I_{off}$>$10^5$ was formed on the plastic substrate. This technique will be applicable to all structure deposited at low temperature and suitable for an easy process for flexible display.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.201-204
• /
• 2005

The initiation of steel corrosion due to chloride diffusion is predicted to consider time-dependancy of surface chloride content. the profile of chloride concentration is the following: constant condition > square root condition > linear condition From these results, the initiation of steel corrosion in concrete is reverse order of above results of chloride profile. the effect of prolongation to initiation of steel corrosion is decreased with increasing concrete cover

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.137-140
• /
• 2005

The objective of this experimental study is to grasp an influence of moisture state of aggregate on the characteristics of the recycled aggregate concrete. The moisture states of the aggregates were controlled at prewetted, oven-dried and saturated surface-dried states prior to use. To maintain the designed mix proportioning unchanged, the amounts of water and aggregates used in mixing were adjusted according to the actual moisture contents of the aggregates. Test results showed that the saturated surface-dried state aggregate concretes exhibited the highest compressive strength.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.88-94
• /
• 2001

In this paper, the lightning-induced voltages on shielded twisted-pair wires with multipoint grounding on cable sheath are calculated by using finite-difference time domain (FDTD) method. The equivalent single-wire line that represents a bundle of twisted-pair wires is adopted for computational efficiency. A finitely conducting ground is also taken into account in both lightning electromagnetic field calculations and surge propagation along the shielded cable for a practical simulation. It is found that multipoint additional grounding on cable sheath provides more shielding effectiveness especially in the early time response of the lightning-induced voltages. From this study, the requirements for lighting surge protection devices in a telecommunication subscriber cab1e can be established.

• Journal of Oral Medicine and Pain
• /
• v.19 no.1
• /
• pp.17-23
• /
• 1994

This study was performed to investigate the biostimulation effects of low level laser therapy (LLLT) on the fungus, Candida albicans, during the short term of cell cycle. Samples were divided into 6 groups which were P7, P9, P11, P15< CW and CO. All samples were irradiated for 1 minute with 2 hours of elapsed time during about 27 hours of the cell cycle of Candida albicans, and the optical density was assessed by spectrophotometry every 2 hours. It was found that there was no difference between the control and any other groups irradiated with 2 hours of short interval.

• Journal of Oral Medicine and Pain
• /
• v.19 no.1
• /
• pp.25-31
• /
• 1994

This study was performed to investigate the biostimulation effects of low level laser therapy (LLLT) on the fungus, Candida alvicans, according to the interval of irradiation during the cell cycle. Samples were divided into 5 groups which were P7-2Hr, P7-4Hr, P15-2Hr, P15-4Hr and Co. Sample was irradiated for 1 minute with 2 hours or 2 minutes with 4 hours of elapsed time during 28 hours of the cell cycle of Candida albicans, and the optical density was assessed by spectrophotometry every 2 hours. It was found that there was significant difference, in the cell growth, between 2 hour and 4 hour interval laser irradiation, although the total energy of each group using identical pulse during exam was equal.

• Imaging Science in Dentistry
• /
• v.35 no.2
• /
• pp.63-68
• /
• 2005

Recently implant has become an important field in dental clinic. Radiographic examination of pre- and post- operation is essential for successful treatment. Clinicians should have knowledge about the purpose of the radiographic examination, suitable imaging modality for the cases, anatomic landmarks of tooth and jaw bone, advantage and limitation of panoramic radiographic examination for implant, principle and interpretation of cross-sectional imaging, bone mineral density, post-operative radiographic examination. This paper will be helpful to get above informations for dentists who want to do dental implant successfully.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.96-101
• /
• 2004

When the wind blows hard, most waves are breaking in sea. Breaking waves occur, exceeding limitation of wave steepness(wave height/wave length=l/7). Because a wave of single angular frequency couldn't generate the breaking phenomena at two dimensional ocean engineering basin, the breaking wave can be generated by the superposition of waves with various angular frequencies. We research how are the particle kinematics in the breaking wave and the magnitude of the breaking wave exciting force. We compare the force in a regular wave which has same specifications(wave height, period and length) as the breaking wave. Also the experimental results of wave exciting force and particle velocity are investigated by comparison on the analytic results using the potential theory.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.51.3-51.3
• /
• 2016

흠경각루(欽敬閣漏)는 1438년 장영실(蔣英實)이 제작한 수격식 천문시계이다. 흠경각루의 작동메커니즘은 물시계, 수차, 수차제어시스템, 기륜, 주전, 각종 기어 등이 유기적으로 작동하여 가산 위의 태양운행장치와 37명의 시보인형들을 움직이게 하는 것이다. 이 연구는 흠경각루의 작동 메커니즘에 따른 가산 내부의 공간구성에 관한 것이다. 특히, 흠경각루의 동력발생 장치 부분인 물시계와 수차의 위치, 시보대 위의 신호발생장치인 주전(籌箭)에 대하여 연구하였다. 주전은 시보인형들이 종, 북, 징을 타격하여 12시와 경점시간을 알리게 하는 신호를 주는 것이다. 이를 위해 흠경각루의 기륜을 움직이기 위해 필요한 물시계와 수차의 크기를 결정하였다. 또한 주전의 작동메커니즘에 대해 분석하고, 구체적인 주전의 형태를 3D 모델링으로 구현하였다.

• Preventive Nutrition and Food Science
• /
• v.7 no.1
• /
• pp.37-42
• /
• 2002

Factors affecting the production of bacterial cellulose and organic acids in Kombucha fermentation were investigated. Kombucha was obtained by the fermentation (for 12 days at 3$0^{\circ}C$) of the green/black tea extract, supplemented with 10% white sugar, using an Oriental tea fungus as starter. Hitgher initial pH increased acid production with decreased cellulose production. With a cellulose pellicle or tea fungus broth as a starter, a 1~3 mm thick cellulose layer developed as a top layer every four days, and was removed subsequently while continuing fermentation. Addition of 30 mL tea fungus broth (13%, v/v) in Kombucha fermentation resulted in maximum production of a cellulose pellicle, indicating weak acid production. Yield of cellulose production at an early stage of fermentation was also higher when Kombucha was inoculated with a cellulose pellicle. In fact, addition of 1% (v/v) alcoholic beverage in the Kombucha fermentation activated the cellulose production, coupled with four times higher acid production.