• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.171-176
• /
• 2002

This paper is the study on stress analysis of spur gear using a finite element method. Gear drives constitute very important mechanisms in transmitting mechanical power processes compromising several cost effective and engineering advantages. The load transmission occurred by the contacting surfaces arises variable elastic deformations which are being evaluated through finite element analysis. The automatic gear design program is developed to model gear shape precisely. This gear design system developed was used by pre-processor of FEM packages. The distribution of stresses at contacting surfaces was examined when a pair of gear contact.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.3
• /
• pp.19-26
• /
• 2001

In order to investigate the effect of single tensile overload on the short crack growth behavior under the out-of-plane cyclic bending moment, crack opening stresses were continuously measured by an elastic compliance method using strain gages. The characteristics of short crack growth after the single tensile overload are analyzed by the effective stress range ratio. Futhermore, the investigation was carried out with respect to various fatigue crack growth behaviors such as the plastic zone size effect on crack retardation, the retarded crack length and the number of cycles.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2001.10a
• /
• pp.38-38
• /
• 2001

no Abstract, See Full Text

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1546-1550
• /
• 2006

한강 하구부의 3개 지점에서 수중 계류방식으로 약 5개월에 걸쳐 탁도를 관측하였다. 이 과정에서 관측기기의 한계로 인해 탁도 자료의 결측치가 발생하였고, 이를 효율적으로 보완하기 위해 새로운 결측치 보완기법을 개발하였다. 개발된 기법, 일명 면적비법은 시계열 자료가 단일주기와 상이한 진폭을 갖는다는 가정하에, 각 사이클의 면적비율을 통해 결측치를 보완하는 방법이다. 면적비법과 기존의 최소제곱법을 검증하기 위해 결측치가 없는 정상적인 자료에 적용해 보면, 두 방법 모두 첨두치를 약간 과소 산정하는 경향이 있었다. 하지만 면적비법의 경우, 원자료의 총 면적과 보완자료의 총 면적간의 차이가 거의 없었다. 이 방법들을 한강 하구부에서 관측된 탁도자료에 적용해 본 결과, 면적비법은 합리적으로 결측치를 보완하는 반면, 최소제곱법은 보완자료의 총면적이 원자료에 비해 작아지는 오류가 발생하였다. 따라서 최소제곱법에 비해 면적비법이 결측치 보완에 더 우수한 결과를 제공함을 알 수 있었다. 본 연구에서 개발한 면적비법은 주기성이 뚜렷한 시계열자료의 결측치 보완에 유용하게 쓰일 수 있으리라 기대된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.452-456
• /
• 2009

무심천에 대한 모니터링은 '무심천 살리기'의 일환으로 이루어진 하천종합조사사업으로써 저수량, 홍수량, 생태계 및 하천공법 등에 대한 조사 및 분석을 수행하고 있다. 모니터링은 5년간에 걸친 사업으로 2007년 5월부터 시작하여 2009년 현재 2차년도 사업을 진행중이다. 본 연구에서는 특히 무심천에 적용된 하천공법에 대한 조사 및 분석에 국한하였다. 여기서 2002년부터 자연형 하천정화사업에서 적용했던 공법과 이로 인한 수리인자의 변화를 관찰하고, 저수로 호안을 포함한 각종 하천환경 시설물의 수리적 대응도를 분석하여 개선 방안을 제시한 것이다. 무심천의 조사구간은 미호천 합류부로부터 청원군과의 경계인 지북동 경계점 까지이며, 조사 및 분석한 하천연장은 무심천 본류 12.0 km이다.

• Journal of Microbiology
• /
• v.42 no.1
• /
• pp.51-55
• /
• 2004

The influence of feedstock amino acids, salt, carbon and nitrogen sources on glutathione production by Saccharomyces cerevisiae FF -8 was investigated. Glucose, yeast extract, KH$_2$PO$_4$, and L-cysteine were found to be suitable feedstock. Highest glutathione production was obtained after cultivation with shaking for 72 h in a medium containing glucose 3.0% (w/v), yeast extract 3.0%, KH$_2$PO$_4$ 0.06% and L-cysteine 0.06%. The glutathione concentration achieved using this medium increased 2.27-fold to 204 mg/l compared to YM basal medium.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.21.1-21.1
• /
• 2011

Vertically aligned single-crystal ZnO nanowires have been successfully grown on c-plane sapphire substrate using chemical vapor deposition (CVD) without catalyst. According to growth temperatures, it was changed ZnO growth characteristic. We investigated the effect of substrate temperatures on the growth ZnO films or nanowires on c-plane (0001) sapphire substrates. The ZnO films were acquired at $500^{\circ}C$, whereas the ZnO nanowires were obtained at $600^{\circ}C$, $700^{\circ}C$, and $800^{\circ}C$. The growth behavior diameter and growth rate of ZnO were changed due to different temperature. As a result of analyzing in-plane residual stress by X-ray diffraction, the optimized condition of ZnO nanowires were at $600^{\circ}C$.

• Macromolecular Research
• /
• v.9 no.1
• /
• pp.30-36
• /
• 2001

Polybutadiene latex grafted (g-PB) in g-PB/SAN blends, i.e., acrylonitrile-butadiene-styrene terpolymer (ABS) were partially replaced by acrylonitrile-butadiene copolymer (NBR) with various acrylonitrile (AN) contents. Changes in morphology, physical and rheological properties were examined. The dispersed size of NBR was decreased as the miscibility with matrix SAM, was increased by increasing AN content in NBR upto 50 wt%. Impact strength was enhanced about two-fold due to the NBR dispersed with a slight larger size than the original g-PB. Gloss was effectively reduced as the particle size of NBR was increased. Tensile yield strength was decreased, and elongation at break or yield behavior at low shear rate were increased as g-PB was partially replaced by NBR having AN content less that 40 wt%.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.709-711
• /
• 2006

According as optical storage becomes high-density, numerical aperture increases. Therefore, the shift characteristic of moving parts in an actuator for optical pickup becomes a critical design factor because of decrease in the tilt margin. The tilt angle is maximized when the position of moving parts is in a diagonal direction within a moving range. This is determined by design of structure and magnetic circuit of an actuator. Previous analysis method only predicts linear characteristics of moving parts. However, the result of shift characteristics of the moving parts considering structural and magnetic circuit's nonlinearity following the every position simultaneously shows us more realistic result. Therefore, we present analysis method considering nonlinearity of moving parts' position through FEM package using coupled-field analysis. Then, we will suggest hereafter a design guide by comparing the above results with experimental ones.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.47-47
• /
• 2001

In order to impart dyeablility on to Polypropylene fiber, PP/EVA blend in the form of fibers and film were preparared using melt blending process. Ethylene vinylacetate containing 28wt% of vinylacetate(EVA(28)) was used as a copolymer. In the study of mechanical properties, tenacity and initial modulus decreased with increasing EVA concentrations, whilst extension at break increased with increasing EVA contents. Their results in the dyeing behavior show that dye adsorption increased with increased EVA contents for both blend fibers and films. The extent of dye uptake of red dye to modified polypropylene fibers was greater than that of Blue and Yellow counterparts due to the difference behavior of dye particles in dyeing bath.