• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.4
• /
• pp.353-359
• /
• 1999

Purpose : A new method of lateral cephalometric analysis for midface, focusing on zygomatic bone, was created in this study, and measured in Korean adults. The purposes of this study are understanding about new approach for midfacial depression, especially zygomatic bone, and using to make adequate diagnosis and treatment plan. Materials and methods : In this study, esthetic Korean adults, 25 males and 25 females who were between $0^{\circ}$ and $4^{\circ}$ in ${\angle}ANB$, and between 62% and 70% in P/A facial height ratio, and had normal overbite and overjet, were used. Orbitale(Or) and Soft tissue orbitale(Or') were used for indicators of anteroposterior position of zygomatic area. And, mean value and standard deviation of linear and angular measurements, and ratio about each linear measurements, were obtained. then, standard deviation diagram - wiggle diagram - was made for visualization of results. Results : Mean values, standard deviations and ranges of 19 measurements were obtained, and among them, 5 linear measurements that had large standard deviation were excluded and the others were used for making standard deviation diagram. In standard deviation diagram, the following results were obtained. 1. If the measurements are located on more left side of mean-value-vertical -line, the potential of midfacial hypoplasia are stronger, especially zygomatic area. 2. If the measurements are located on more right side of mean-value-vertical-line, the potential of midfacial hypoplasia are decreased. Conclusion : This study presented a new method of lateral cephalometric analysis focusing on zygomatic bone in Korean adults. We expect that the results of this study can be used as parameter when clinicians make decisions about diagnosis and treatment plan for rehabilitation of esthetics and function. But, it is necessary to prove its usefulness, and to further evaluate the results.

• The KIPS Transactions:PartD
• /
• v.19D no.4
• /
• pp.281-292
• /
• 2012

A wide variety of smartphone applications is increasing the usage time of smartphone. Due to the increased time, it becomes difficult to providing stable services to users with limited battery capacity. The past works have been performed the power management of mobile device toward long-lasting battery development or low-power electric devices. However as the complexity of software embedded into system are increased, the research interests of the software power analysis is also increased. Among these studies on the software power analysis, model-based analysis technique is one of major interests because it can be able to analyze the power consumption before the development of source codes, then the analysis result can be used in the development of the software system, This paper suggests a model-based power analysis technique using UML state machine diagram. Our proposed technique estimates the power consumption by the simulation of Perti-net which is transformed from the state machine diagram.

• Spatial Information Research
• /
• v.15 no.3
• /
• pp.203-218
• /
• 2007

The purpose of this article is to set up the scientific and reasonable norm of location and service area determination instead of the pro-administrative lacking availability, so as to propose more practical and reasonable standard of space unit for the location of facilities. This article has accepted the method of Voronoi Diagram as a new scientific and reasonable criteria. The article chooses and realizes a model that can propose a new service area, transform and apply to improve its reality, and assesses which has more reality and compatibility by comparing the models. The result from this procedure can be adapted in objectification of the service area determination and formation of the standard space unit.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.4 no.1
• /
• pp.11-22
• /
• 1984

In the straight beam inspection of ultrasonic wave, the method for evaluating flaw size by AVG diagram is useful as a method for the quantitative evaluation of results of ultrasonic flaw detection. This study was carried out the measure the size of circular flat flaw with the inclination by straight beam inspection and could be decreased the error of application due to the inclination of flaw by AVG diagram in consideration of correction coefficient. From the result of the experiment, the error by means of the application of experimental values to AVG diagram was increased as the inclination angle grows. Also, it n s increased the error of application as the detecting frequency and diameter of flaw grows in the same inclination angle. In case of diameter of flaw 6mm, AVG diagram could be applied to the inclination angle $3^{\circ}$ for 5 MHz, $7^{\circ}$ for 2.25 MHz, $15^{\circ}C$ for 1 MHz in the range of 20% error and the theory was concided with the experiment to $5^{\circ}C$ for 5 MHz, $10^{\circ}C$ for 2.25 MHz, $15^{\circ}C$ for 1 MHz in the range of 10% error by correction eq. (45) due to the inclination angle. Therefore, it is considered that the results obtained from this study will be somewhat helpful informations for the size evaluation of circular flat flaw with the inclination.

• The KIPS Transactions:PartD
• /
• v.16D no.4
• /
• pp.517-526
• /
• 2009

It is possible to indicate the complex design and execution of object-oriented program with dynamic UML diagram. This paper shows the way how to make several test cases from sequence, state, and activity diagram among dynamic UML diagram. Three dynamic UML diagrams about withdrawal work of ATM simulation program are drawn. Then different test cases are created from these diagrams using previously described ways. To evaluate effectiveness of test cases, mutation testing is executed. Mutants are made from MuClipse plug-in tool based on Eclipse which supports many traditional and class mutation operators. Finally we've got the result of mutation testing and compare effectiveness of test cases, etc. Through this document, we've known some hints that how to choose the way of making test cases.

• Korean Journal of Materials Research
• /
• v.33 no.5
• /
• pp.205-213
• /
• 2023

This paper reports the results of an experimental examination using X-rays to test annealing materials for lapped bearing steel (STB2), to confirm the validity of the weighted averaging analysis method. The distribution behavior for the α_𝜓-sin²𝜓 diagram and the presence or absence of differences in the peak method, half-value breadth method, and centroid method were investigated. When lapping the annealed bearing steel (STB2) material, a residual stress state with a non-directional steep gradient appeared in the surface layer, and it was found that the weighted averaging analysis method was effective. If there is a steep stress gradient, the sin²𝜓 diagram is curved and the diffraction intensity distribution curve becomes asymmetric, resulting in a difference between the peak method, half-value breadth method, and centroid method. This phenomenon was evident when the stress gradient was more than 2~3 kg/mm²/㎛. In this case, if the position of the diffraction line is determined using the centroid method and the weighted averaging analysis method is applied, the stress value on the surface and the stress gradient under the surface can be obtained more accurately. When the stress gradient becomes a problem, since the curvature of the sin²𝜓 diagram appears clearly in the region of sin²𝜓 > 0.5, it is necessary to increase the inclination angle 𝜓 as much as possible. In the case of a lapping layer, a more accurate value can be obtained by considering 𝜎₃ in the weighted averaging analysis method. In an isotropic biaxial residual stress state, the presence or absence of 𝜎₃ can be determined as the presence or absence of strain for sin²𝜓≈0.4.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.479-480
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.671-672
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.449-450
• /
• 2009

• Atmosphere
• /
• v.30 no.2
• /
• pp.141-154
• /
• 2020

Seasonal forecast is growing in demand, as it provides valuable information for decision making and potential to reduce impact on weather events. This study examines how operational climate prediction systems can be reliable, producing the probability forecast in seasonal scale. A reliability diagram was used, which is a tool for the reliability by comparing probabilities with the corresponding observed frequency. It is proposed for a method grading scales of 1-5 based on the reliability diagram to quantify the reliability. Probabilities are derived from ensemble members using hindcast data. The analysis is focused on skill for 2 m temperature and precipitation from climate prediction systems in KMA, UKMO, and ECMWF, NCEP and JMA. Five categorizations are found depending on variables, seasons and regions. The probability forecast for 2 m temperature can be relied on while that for precipitation is reliable only in few regions. The probabilistic skill in KMA and UKMO is comparable with ECMWF, and the reliabilities tend to increase as the ensemble size and hindcast period increasing.