• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.45.1-45.1
• /
• 2009

과학기술위성 3호의 주탑재체인 MIRIS (Multi-purpose InfraRed Imaging System)는 우주관측카메라 (Space Observation Camera, SOC)와 지구관측카메라 (Earth Observation Camera, EOC)가 독립적인 시스템으로 구성되어 있다. 지구관측카메라는 유효 구경 100 mm, F/5의 광학계로 3-5 마이크론 파장영역을 관측하며, 국내에서 개발된 적외선 검출기의 우주 인증 시험과 유사시 한반도 적외선 감시를 주요 목적으로 하고 있다. 고도 700km에서 지상을 볼 때 약 42m/pixel의 공간분해능을 나타낼 것으로 기대하고 있다. 지구관측카메라의 인증 모델(Qualification Model)은 냉동기를 제외한 모든 부품이 국내기술로 제작되었으며, 미러 본딩 및 릴레이 렌즈 조립 기술, 적외선 영상 검교정 기술 등 다양한 경험과 도전을 제공했다. 이 발표에서는 지구관측카메라 인증모델을 이용하여 수행한 주요 시험 과정을 소개한다. 국내 회사 (주)i3 system에서 제작된 적외선 검출기는 $320\times256$ HgCdTe array (평균 양자효율 80% 이상) 이며 77K에서 정상적으로 운영된다. Micro Stirling Cooler에 의해 듀어는 전원을 켠 후 5분 이내에 검출기 운영온도인 77K까지 내려간다. 적외선 광학계의 정렬, 시스템 MTF 측정, 흑체 측정 및 검교정 작업을 수행한 후 야외에서 다양한 경우에 대해 Field Test를 진행했다. 이 발표에서는 Field Test 과정과 이를 통해 얻은 결과를 발표하고, FM (Flight Model) 제작에 있어 수정해야 할 사항들을 제안해 본다.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.44.4-45
• /
• 2009

과학기술위성 3호의 주탑재체인 MIRIS (Multi-purpose InfraRed Imaging System) 적외선우주관측카메라의 인증모델이 조립을 마치고 현재 성능시험이 진행 중이다. MIRIS 적외선광학계는 구경 80mm의 광시야(f/2) 굴절식 망원경으로서, 총 5매의 렌즈로 구성되어 있다. 렌즈들은 S-FPL53, S-TIH6, Fused Silica 등의 재료를 사용해 가공되었으며, MIRIS 관측 파장대역($0.9\sim2.0{\mu}m$)에서 투과율이 극대화되도록 반사억제 코팅이 적용되었다. MIRIS 광학계 및 광기계부 설계에 있어서의 주요 고려사항은, 1) 상온에서 조립된 상태에서 발사 시 위성체가 받는 충격과 진동을 견뎌낼 것, 그리고 2) 발사 후 위성 궤도상에서의 복사냉각을 통해 180K로 열수축된 상태에서 최적의 광학성능을 발휘할 것 등이다. 이러한 설계 개념을 바탕으로 MIRIS 광학계를 제작하였으며, 조립된 인증모델은 진동시험 및 열진공시험을 통과하였다. 이 발표에서는 MIRIS 적외선우주관측카메라 광학계의 인증모델 제작 과정과 부품별 시험, 그리고 조립 후 상온 및 저온성능시험 결과에 대하여 논의 한다.

• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.128-132
• /
• 2020

Total organic carbon (TOC) analysis equipment, which was previously used to prevent eutrophication in advance, is heavy, bulky, and expensive; therefore, so it is difficult to be carried and has been used as an experimental unit. In this study, a through-carbon analysis chip that integrates pretreatment through photocatalytic oxidation and carbon dioxide measurement using a pH indicator was investigated. Both the total carbon - inorganic carbon method and the nonpurgeable organic carbon (NPOC) measurement method require an acidification part for injecting an acid solution for inorganic carbon measurement and removal, an oxidation part for total carbon or NPOC oxidation and a measurement part for Carbon dioxide (CO₂) measurement. Among them, the measurement of oxidation and CO₂ requires physical technology. The proposed TOC analysis chip decomposed into CO₂ as a result of the oxidizing of organic carbon using a photocatalyst, and the pH indicator that was changed by the generated CO₂ was optically measured. Although the area of the sample of the oxidation part and the pH indicator of the measurement part were distinguished in an enclosed space, CO₂ was quantified by producing an oxidation part and a measurement part that shared the same air in one chip. The proposed TOC analysis chip is less expensive and smaller, cost and size are disadvantages of existing organic carbon analysis equipment, because it does not require a separate carrier gas to transport the CO₂ gas in the oxidation part to the measurement part.

• Korean Journal of Materials Research
• /
• v.22 no.8
• /
• pp.433-438
• /
• 2012

A chemical process involves polymerization within microspheres, whereas a physical process involves the dispersion of polymer in a nonsolvent. Nano-sized monodisperse microspheres are usually prepared by chemical processes such as water-based emulsions, seed suspension polymerization, nonaqueous dispersion polymerization, and precipitation polymerizations. Polymerization was performed in a four-necked, separate-type flask equipped with a stirrer, a condenser, a nitrogen inlet, and a rubber stopper for adding the initiator with a syringe. Nitrogen was bubbled through the mixture of reagents for 1 hr. before elevating the temperature. Functional silane (3-mercaptopropyl)trimethoxysilane (MPTMS) was used for the modification of silica nanoparticles and the self-assembled monolayers obtained were characterized by X-ray photoelectron spectroscopy (XPS), laser scattering system (LSS), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), elemental analysis (EA), and thermogravimetric analysis (TGA). In addition, polymer microspheres were polymerized by radical polymerization of ${\gamma}$-mercaptopropyl modified silica nanoparticles (MPSN) and acrylamide monomer via precipitation polymerization; then, their characteristics were investigated. From the elemental analysis results, it can be concluded that the conversion rate of acrylamide monomer was 93% and that polyacrylamide grafted to MPSN nanospheres via the radical precipitation polymerization with AAm in ethanol solvent. The microspheres were successfully polymerized by the 'graft from' method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.547-547
• /
• 2013

This paper presents the understandings carried out for the installation of the hydrogen reservoir of the multi-gap pseudospark switch under developing for the accelerator applications. As a cold cold cathode switch, the pseudospark switch could replace the thyratron switch which has hot cathode and being used well currently in the high power field such as laser and accelerator applications. Especially in the klystron modulator, the key component is a switch which mostly defines the jitter and the instability of the modulator system. To get the less jitter and the instability, we need to find proper range of the pressure for the gas discharge inside gas switch. This could be achieved by the understanding of the characteristic of the nonevaporable getter (NEG) which is used as a hydrogen reservoir for the switch. Therefore we verified the characteristics of the NEG (St 172, Saes) and its installation in the switch. Finally we controlled the getter to find best pressure point for the pseudospark switch.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.40.2-40.2
• /
• 2010

MIRIS 우주관측카메라는 과학기술위성 3호의 주탑재체로서 $0.8{\sim}2.0{\mu}m$의 근적외선영역에서 우주배경복사와 우리은하 평면의 Pa-$\alpha$ survey 관측을 목적으로 한다. 이러한 임무를 수행하기 위해 MIRIS 우주관측카메라에는 MCT(HgCdTe) IR 검출기가 사용되고 6개의 필터를 장착할 수 있는 필터휠이 설계되었으며, 열잡음을 줄이고 원하는 SNR을 얻기 위해 모두 100K 이하로 냉각이 요구된다. 효과적인 냉각 및 저온유지를 위해서 외부의 열을 1차적으로 차단하는 Cryostat 외부용기와 100K 이하로 냉각되는 내부 Cold Box의 이중구조를 가지는 Dewar가 설계 되었다. 내부 Cold Box의 냉각은 소형 stirling cooler로 이루어지고 외부의 열 유입량이 Cooler의 냉각용량을 넘지 않도록 설계하였다. Cryostat 외부용기는 radiation cooling으로 냉각되어 200K 이하의 온도를 유지하며 내부 Cold Box로의 열유입을 최소화하기 위해 GFRP(Glass Fiber Reinforced Plastic) 단열 지지대와 MLI(Multi Layer Insulation)가 사용된다. 또한 100K으로 냉각시 필터고정부와 Cold Box 구조에서 일어날 수 있는 구조적인 피로도를 줄이고 열변형에 의한 문제를 방지하기 위한 고려가 설계에 포함되었다. FM(Flight Model)은 고진공 환경의 우주공간에서 문제가 발생하지 않도록 설계되었다. 또한 EQM 진동시험결과를 토대로 발사환경에서 발생하는 강한 진동을 견딜 수 있도록 FEM(Finite Elements Method) 구조해석을 통하여 필터고정부에 flexible structure 설계와 완충제를 추가하고 필터휠 구동부와 harness 고정부 및 cooler 지지부를 비롯한 전체 구조물에서 충분히 진동을 극복할 수 있도록 설계하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.56.1-56.1
• /
• 2010

MIRIS(Multipurpose InfraRed Imaging System)는 과학기술위성 3호의 주 탑재체로서 2011년 발사예정인 다목적 적외선 카메라 시스템이다. MIRIS는 우주관측 카메라와 지구관측 카메라로 구성되어 있으며, 우주관측 카메라는 $0.9-2.0{\mu}m$ 영역에서 3.67 deg. x 3.67 deg. FOV로 우리 은하평면 survey 관측과 우주배경복사(CIB) 관측을 수행할 것이다. 현재 MIRIS는 비행모델 개발 마무리 단계에 있으며, 검교정 시험, 열-진공 시험, 진동 시험 등을 수행하고 나면 2010년 말 위성 본체와의 조립을 진행할 것이다. 우주관측 카메라는 궤도상에서 태양, 지구의 적외선 복사와 망원경과 검출기 주변에서 발생하는 열잡음을 줄이기 위해 냉각이 필요하며, 제한된 위성의 무게와 부피, 전력등의 요구조건들 때문에 망원경 및 구조체의 복사냉각(Passive Cooling) 방법을 선택하였다. Passive cooling으로 우주관측 카메라의 망원경이 200K 이하로 냉각되면, dewar에 설치된 소형 냉각기를 가동하여 적외선 센서를 80K로 냉각한다. 위성체 내벽과 우주관측카메라의 각 구조체들 사이의 복사를 차단하기위해 30층의 MLI를 적용 하였고, 각 구조체들간의 열전도를 최소화하기위해 GFRP supporter를 적용하였다. 이 실험은 천문(연)에서 자체 제작한 열-진공 챔버를 활용하여 진행하였으며, 이미 인증모델에 대한 passive cooling 실험을 두 차례 실시하였고, 그 실험 결과를 반영하여 최종 비행모델에 대한 실험을 수행하였으며, 그 실험 결과에 대해 논의 하고자 한다.

• (The)Study of the Eastern Classic
• /
• no.34
• /
• pp.63-88
• /
• 2009

This paper was a quest of pattern of holding "Dae Hak - the Great Learning" during Joseon Period having investigated the characteristics of the Essentials of the Studies of the Sages(聖學輯要, Seong Hak Jibyo) that was compiled by Lee I was a reinterpretation of the Great Learning, and also academic enrichment. During the period of Joseon Dynasty, the Great Learning had held the most important position as core scripture in the intellectual society that pursued Seong Hak(聖學, sage learning). Throughout the Joseon Period, the Great Learning was the essential text for the Emperorship Learning(帝王學, Jewang Hak) as well as Seong Hak, and it can also be said that Seong Hak Jibyo compiled by Yulgok - the courtesy name of Lee I, was the comprehensive collections thereof. While compiling Seong Hak Jibyo, Yulgok presented a model of Seong Hak of Joseon, which was based on "the Great Learning". Yul Gok organized the system of "Seong Hak Jibyo" largely in five parts, and properly arranged the Three Cardinal Principles(三綱領, samgangryeong) and Eight Articles or Steps(八條目, paljomok) therein. Particularly, in the Chapter Two, "Cultivating Oneself(修己, sugi)", Yulgok deal with 'being able to manifest one's bright virtue'(明明德, myeong myeong deok) among the Three Cardinal Principles as the core curriculum, meanwhile, Yulgok also covered "Investigation of things, gyeongmul(格物)," "Extension of knowledge, chiji(致知)," "Sincerity of the will, Seongui(誠意)," "Rectification of the mind, Jeongshim(正心)," "Cultivation of the personal life, susin(修身)," among Paljomok(eight steps) as the ultimate purpose of 'Stopping in perfect goodness'(止於至善, jieojiseon) These well preserve the principal system of Confucianism where "Cultivating oneself and regulating others (修己治人, sugichiin)" are core value, and his instructions as such also back up academic validity logically by presenting specific guidelines for practice according to each domain. Reinterpretation of "The Great Learning" by Yulgok in Seong Hak Jibyo is an arena to investigate the characteristics of Confucianism in Joseon Period, which was different from that of China, furthermore, such guidelines might take a role as criteria to understand the characteristics of humans and learning possessed by Korean people.

• The Journal of Dong Guk Oriental Medicine
• /
• v.6 no.1
• /
• pp.129-136
• /
• 1997

We inquired into tile origins, pathologies, theraphies and prescriptions of Jungpung(中風) especially on the ground of Keokchiyeron(格致餘論) Dangeosimbub(丹溪心法) written by JuJinHyoung(朱震亨) as medical books, from this study we could get that conclusions. 1. According to special feature of the theroies of JuJinHyoung's(朱震亨) Jungpung(中風) he thought pathologies of Jungpung(中風) as "sub seong dam dam seong yeol yeol seong pung 濕生痰痰生熱 熱生風" through studying stress on regional characteristics and thought much of dam(痰) as one of major elements of internal causes. 2. He suggested chi-dam(治痰) in the first place in the treatment of Jungpung(中風) and emphasises the treatment using Succus Pyllostachyos(竹瀝), waterly extracted Rhizoma Zingiberis(薑汁) in that they had the virtues of sodam-ganghwa(消痰降火), geo-gyeongrak(開經絡), haeng-heolgi(行血氣) 3. He treated differently whether a man in fat and thin, and have right or left hemiplegia, but he prescribed herb-medications on the principle that that medications should have the virtues of chi-dam(治淡).

• Journal of Pharmacopuncture
• /
• v.17 no.2
• /
• pp.57-66
• /
• 2014

Objectives: This study was performed to analyze single dose toxicity and the lethal dose of Scolopendrid Pharmacopuncture in rats. Methods: All experiments were conducted at the Korea Testing & Research Institute (KTR), an institution authorized to perform non-clinical studies, under the regulations of Good Laboratory Practice (GLP). Sprague-Dawley rats were chosen for the pilot study. Doses of Scolopendrid pharmacopuncture, 0.1, 0.5, and 1.0 mL, were administered to the experimental group, and 1.0 mL doses of normal saline solution were administered to the control group. This study was conducted under the approval of the Institutional Animal Ethic Committee. Results: No deaths or abnormalities occurred in any of the groups. No significant changes in the weight, hematological parameters or clinical chemistry were noted between the control group and the experimental group. To check for abnormalities in organs and tissues, we used microscopy to examine representative histological sections of each specified organ; the results showed no significant differences in any of the organs or tissues. Conclusion: The above findings suggest Scolopendrid Pharmacopuncture is a relatively safe to use for treatment. Further studies on the subject should be conducted to yield more concrete evidence.