• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.10-22
• /
• 2009

This paper presents an LED lighting system with an LED color control algorithm that can independently change its color temperature and illuminance. To show the validity of the proposed algorithm, it is proven that its solution always exists. The proposed algorithm was applied to the control of an LED module that is composed of red, green, blue, and white (RGBW) LEDs. Its color temperature variation ranged from 3,500~7,500[$^{\circ}K$], and its illuminance ranges from 500~1,500[lux]. Within these range, the color temperature and illuminance deviations are as low as $\pm0.8$[%] when the junction temperature of LEDs are maintained at 40[$^{\circ}C$]. In the range of 30~70[$^{\circ}C$], the measured illuminance and color temperature deviations are as low as 2.1[%] and 3.6[%], and the compensated ones are as low as 1[%] and 0.49[%], when the desired illuminance and color temperature are 1,000[lux] and 6,500[$^{\circ}K$], respectively.nyang.ac.kr).

• Science of Emotion and Sensibility
• /
• v.17 no.3
• /
• pp.29-38
• /
• 2014

The purpose of this study was to verify human physiological responses to emotional lighting system using LED (light emitting diode) flat lighting. Subjects were ten males in their twenties without medical history to eyes. Colors of LED lighting are red, orange, yellow, green, blue, purple and colorless (white). They were stimulated by LED lighting for 5 minutes. We measured body temperature, heart rate variability (HRV) and electroencephalogram (EEG) before and after color stimulus. In case of EEG analysis, relative power ${\alpha}$ wave ratio decreased in the groups of colorless, red and orange color light. Also, sympathetic nerve was more activated than parasympathetic nerve and the body temperature was increased in the groups of colorless, red, orange, yellow color light. On the other hand, relative power ${\alpha}$ wave ratio increased and parasympathetic nerve was more activated than sympathetic nerve and the body temperature was decreased in the groups of green, blue and purple color light. The results imply that the LED color lighting system in the realistic experiment environment. In the future, studies with compounded both colors and modes according to situation or auditory as nature sound or olfactory as aroma will be required.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.12
• /
• pp.920-923
• /
• 2013

In this paper, the characteristics of a carbon nanotube composite heat sink proposed to replace the advanced Al heat sinks for LED lighting devices were studied. Proposed CMP-PLA heat sink was made by mixing 20~70 wt% carbon nanotube, 20~70 wt% bio-degradable polymer of melt-blended PLA (poly lactic acid) and PBS (poly butylene succinate) and PLA nucleating agents composed of the mixture of soybean oil and biotites, at $150{\sim}220^{\circ}C$ with 1,000~1,500 rpm. Optical and electric characteristics of 7.5 W LED lighting devices using heat sinks with such prepared CMP-PLA were investigated. And, the properties of the heat, which was not released from the CMP-PLA type heat sinks, was also investigated. The color temperature of LED lighting devices using the CMP-PLA heat sinks was 5,956 K, which is x= 0.32 and y= 0.34 in the XY chromaticity, and the color rendering index was 75. The luminous flux and the luminous efficiency of LED lighting devices using the CMP-PLA heat sinks was 540.6 lm and 72.68 lm/W respectively. Measured initial temperature of the heat sinks was $27^{\circ}C$, and their temperature increased as time to be saturated at $52^{\circ}C$ after an hour.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1637-1642
• /
• 2015

Next-generation applications using technology IT fused to biological signals from the emotional state to extract a lot of research has been, and the sensitivity of the human sensory functions influences the physiological condition known to be the fact that. In this paper, Propose an Emotional-lighting control algorithm using bio-signals. LED lighting for Emotion light is environmentally friendly and has a high efficiency and long life. In particular, LED lights are different colors represent the possible single light sphere advantages. And, Human sensitivity for determining a more accurate biological signals using EEG was collected using EEG equipment sensitivity was determined to analyze the EEG.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.4
• /
• pp.6-13
• /
• 2012

In this paper, we took an indirect reflectance type that irradiates light from an LED module, which reflects light from a reflector onto the road. This LED pedestrian lighting design produces minimal glare from a relatively simple structure. Using LightTools 7.2, we conducted a study on the varying shape and curvature of the reflector. In order to further investigate this data, we researched the ratio of the DLOR and ULOR, the average illuminance, and the uniformity of the illumination. Based on this research, we selected optimum conditions to realize the actual LED pedestrian lighting using RELUX software. We found the average illuminance value to be 22[1x] and the illuminance uniformity ratio to be 0.23, which met the criteria of the proposed standards set in KS C 7658. In addition, it also satisfied the criteria of the standards set in KS A 3701 by having TI (Threshold Increment) at 7[%].

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.10
• /
• pp.830-836
• /
• 2012

An efficient cooling system is essential for the electronic packaging such as a high-luminance LED lighting. A special heat transport technology, Pulsating Heat Pipe (PHP), can be applied to the cooling of LED lighting. In this paper, the operational characteristics of the PHP in the imposed thermal boundary conditions of LED lighting were experimentally investigated. The experimental PHP was made of copper tubes of internal diameter of 2.1 mm. The working fluids of ethanol, FC-72, water, acetone and R-123 were chosen for comparison. The results showed that an optimum range of charging ratio exists for high cooling performance; 50% for most of the fluids. Among the five working fluids, water showed the highest heat transfer rate of 260 W. Two distinguished characteristics of pulsating direction were identified. It is also identified that high vapor pressure gradient is one of key parameters for better heat transfer performance.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1643-1653
• /
• 2014

This paper presents the design and implementation of a wind-solar hybrid power system for LED street lighting and an isolated power system. The proposed system consists of photovoltaic modules, a wind generator, a storage system (battery), LED lighting, and the controller, which can manage the power and system operation. This controller has the functions of maximum power point tracking (MPPT) for the wind and solar power, effective charging/discharging for the storage system, LED dimming control for saving energy, and remote data logging for monitoring the performance and maintenance. The proposed system was analyzed in regard to the operation status of the hybrid input power and the battery voltage using a PSIM simulation. In addition, the characteristics of the proposed system's output were analyzed through experimental verification. A prototype was also developed which uses 300[W] of wind power, 200[W] of solar power, 60[W] LED lighting, and a 24[V]/80[Ah] battery. The control system principles and design scheme of the hardware and software are presented.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.332-342
• /
• 2018

This study is aimed at suggesting information about technical choices for designing LED camping lights based on emotional lighting contents of integrated IOT and design areas which take a central role in creation and knowledge based industries and the procedure for materializing them. 'i-Light,' a portable LED camping light, is 'connected lighting' connecting men, space and emotion and a smart camping light based on IOT and emotional lighting contents. 'i-Light' has two functions. One is about lighting for adjusting color and color temperature naturally and the other is about safety for detecting harmful gases. 'i-Light' also has various emotional functions for experiencing interaction and taste of light. For the purpose, portable LED camping lights were designed, first of all, and then a highly color rendering/full-color lighting module, a smart sensor module and an IOT device platform were developed. In addition, efforts were made to establish detailed data about emotional lighting contents and to develop a Web application based on them. Finally, prototypes of portable LED camping lights were made to get a test bench and usability evaluation from related organizations. According to the results, all of 12 developed emotional lighting contents and three IOT safety sensors were suitable and prototypes were satisfactory. This paper will suggest a direction about actual technical choices for development of contents and products integrating artificial intelligence and big data and about the procedure for materializing them.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.188-199
• /
• 2019

In this study, research trends were investigated by examining important academic research on museum lighting that has been carried out in Korea over the past 30 years. The aim was to highlight important studies conducted in Korea on material deterioration caused by museum lighting and to examine the current status of research on LED light sources to provide direction for future research. The ultimate goal of studies on museum lighting is to improve the long-term conservation effects, and this study examined the latest light sources of each era. Prior to the 1990s, the effects of light sources on relics were assessed by investigating incandescent light bulbs and fluorescent lamps, the first museum exhibition lighting. Then in the 1990s, the introduction of halogen lamps and HID lamps led to the analysis of the characteristics of a light source itself and the introduction of illumination standards. In the 2000s, the lighting environment of museums was investigated based on the characteristics of the light sources that had been studied, and in terms of preservation, research was conducted not only to improve the conservation of relics but also to improve the sentiments of visitors. After 2010, LED lamps were introduced; therefore, material deterioration studies on LED lamps were expanded. During this period, enhancements to LED light sources were made, such as reducing the blue spike area and increasing color rendering. With the development of lighting used in museums and art galleries, the direction of the display preservation criteria has led to the need to prepare advanced standards, covering all aspects from the center of illumination to the consideration of the color of an object and the speed of radiation from the light source. Regular studies of museum lighting in a long-term perspective should be planned to standardize the more advanced conditions of material discoloration.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.161-164
• /
• 2008

ELS(Edge Light System)을 이용한 40W조명 시스템을 개발하기 위하여, ELS에 적합한 LED를 선정하고, 색온도 제어라 광색제어를 위한 구동회로 및 제어회를 설계 제각 하였으며, 0.5W R,G,B 4 IN 1 Package 를 적용하여 LED 180EA를 사용하여 LED Lighting System을 개발하였다. ELS LED Lighting System은 40W급 LED SMPS 구동회로 및 광색/색온도 제어회로 설계, 면발광을 위한 ELS 설계, 방열 설계 및 기구 구조 설계를 통하여 개발되었으며, 직접 시제품을 제작하고 그 성능을 측정하였다.