• 제목/요약/키워드: Least-Mean-Square

검색결과 690건 처리시간 0.027초

Orbit Determination of High-Earth-Orbit Satellites by Satellite Laser Ranging

  • Oh, Hyungjik;Park, Eunseo;Lim, Hyung-Chul;Lee, Sang-Ryool;Choi, Jae-Dong;Park, Chandeok
    • Journal of Astronomy and Space Sciences
    • /
    • 제34권4호
    • /
    • pp.271-280
    • /
    • 2017
  • This study presents the application of satellite laser ranging (SLR) to orbit determination (OD) of high-Earth-orbit (HEO) satellites. Two HEO satellites are considered: the Quasi-Zenith Satellite-1 (QZS-1), a Japanese elliptical-inclinedgeosynchronous-orbit (EIGSO) satellite, and the Compass-G1, a Chinese geostationary-orbit (GEO) satellite. One week of normal point (NP) data were collected for each satellite to perform the OD based on the batch least-square process. Five SLR tracking stations successfully obtained 374 NPs for QZS-1 in eight days, whereas only two ground tracking stations could track Compass-G1, yielding 68 NPs in ten days. Two types of station bias estimation and a station data weighting strategy were utilized for the OD of QZS-1. The post-fit root-mean-square (RMS) residuals of the two week-long arcs were 11.98 cm and 10.77 cm when estimating the biases once in an arc (MBIAS). These residuals were decreased significantly to 2.40 cm and 3.60 cm by estimating the biases every pass (PBIAS). Then, the resultant OD precision was evaluated by the orbit overlap method, yielding three-dimensional errors of 55.013 m with MBIAS and 1.962 m with PBIAS for the overlap period of six days. For the OD of Compass-G1, no station weighting strategy was applied, and only MBIAS was utilized due to the lack of NPs. The post-fit RMS residuals of OD were 8.81 cm and 12.00 cm with 49 NPs and 47 NPs, respectively, and the corresponding threedimensional orbit overlap error for four days was 160.564 m. These results indicate that the amount of SLR tracking data is critical for obtaining precise OD of HEO satellites using SLR because additional parameters, such as station bias, are available for estimation with sufficient tracking data. Furthermore, the stand-alone SLR-based orbit solution is consistently attainable for HEO satellites if a target satellite is continuously trackable for a specific period.

화학계량학적 방법을 사용한 Triton X-100이 함유된 1-(2-Thiazolylazo)-2-Naphthol을 사용한 구리, 니켈과 아연의 동시 분광광도법적 정량 (Simultaneous Spectrophotometric Determination of Copper, Nickel, and Zinc Using 1-(2-Thiazolylazo)-2-Naphthol in the Presence of Triton X-100 Using Chemometric Methods)

  • Low, Kah Hin;Zain, Sharifuddin Md.;Abas, Mhd. Radzi;Misran, Misni;Mohd, Mustafa Ali
    • 대한화학회지
    • /
    • 제53권6호
    • /
    • pp.717-726
    • /
    • 2009
  • Triton X-100이 함유된 상태에서 정색시약인 1-(2-thiazolylazo)-2-naphthol이 첨가된 물에서 구리 (II), 니켈(II)과 아연(II)의 동시 분광광도법적 정량을 위한 다변량 모델들이 개발되었다. 분광학적 간섭의 단점을 극복하기 위해서, 주성분회귀분석법(PCR)과 부분최소자승법(PLS) 다변량 분석법적 접근이 적용되었다. 다양한 시험 세트를 사용하여 본 방법의 수행이 입증되었고 그 결과들이 비교되었다. 일반적으로 PLS와 PCR 모델들 사이에 분석적 수행에서의 심각한 차이가 없었다. $Cu^{2+}$, $Ni^{2+}$ and $Zn^{2+}$ 의 세 성분들을 사용한 예측의 제곱근 평균 제곱 오차(RMSEP)들은 각각 0.018, 0.010, 0.011 ppm이었다. 또한 감도, 분석감도, 검출한계(LOD)와 같은 가치들의 측면들이 평가되었다. 본 논문에서 제안하는 과정이 화합물 혼합용액과 수돗물 속의 $Cu^{2+}$, $Ni^{2+}$ and $Zn^{2+}$의 동시 검출에 적용되었을 때에 높은 신뢰도가 성취되었다.

전통 메주 제조과정에 있어서 근적외 모니터링 가능성 조사 (Feasibility of near-infrared spectroscopic observation for traditional fermented soybean production)

  • 전재환;이선미;조래광
    • 한국식품저장유통학회지
    • /
    • 제24권1호
    • /
    • pp.145-152
    • /
    • 2017
  • 본 연구에서는 전통 재래식 콩된장의 제조공정을 과학적으로 해석하기 위한 연구의 일환으로 생메주의 건조 및 발효과정에 있어서 수분함량과 단백질 분해에 의한 아미노산 생성과정을 근적외 분광법으로 쉽게 판단 할 수 있는지 그 가능성을 조사하였다. 생메주를 일정한 크기($3{\times}4{\times}3cm$)로 잘라서 수분이 30%가 되도록 $25^{\circ}C$ 항온기에 3주간 발효시킨 모델계 발효메주를 만들어 가시광-근적외 스펙트럼을 측정하여 해석하였다. 발효가 진행됨에 따라 수분이 감소되면서 수분과 관련이 있는 1,430 nm대의 흡광도가 감소 및 시프트 되는 것이 관찰되었고, 발효기간이 길어질수록 아미노산과 관련이 있는 2,050 nm대의 흡광도가 증가하는 것을 관찰 할 수 있었다. 전통 재래식 발효메주를 속부분과 겉부분으로 분리하여 1,000-2,250 nm에서의 가시광 스펙트럼과 근적외 스펙트럼 데이터로 판별분석한 결과, 겉부분과 속부분이 잘 판별되었고, 가시광 보다는 근적외 영역에서 잘 구분되었다. 이들 전통메주중의 아미노산 농도를 비파괴 측정하기 위해 PLSR한 결과 $R^2$은 0.9 이상이며, RMSECv 0.23%로 나타났으며, 전통메주중의 수분함량도 $R^2$ 0.81, RMSECv 0.83%이어서 근적외 분광법으로 전통메주의 품질을 비파괴 측정 가능할 것으로 판단되었다.

Effectiveness of Cognitive Behavioral Therapy Techniques for Control of Pain in Lung Cancer Patients: An Integrated Review

  • Phianmongkhol, Yupin;Thongubon, Kannika;Woottiluk, Pakapan
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제16권14호
    • /
    • pp.6033-6038
    • /
    • 2015
  • Background: Experience of lung cancer includes negative impacts on both physical and psychological health. Pain is one of the negative experiences of lung cancer. Cognitive behavioral therapy techniques are often recommended as treatments for lung cancer pain. The objective of this review was to synthesize the evidence on the effectiveness of cognitive behavioral therapy techniques in treating lung cancer pain. This review considered studies that included lung cancer patients who were required to 1) be at least 18 years old; 2) speak and read English or Thai; 3) have a life expectancy of at least two months; 4) experience daily cancer pain requiring an opioid medication; 5) have a positive response to opioid medication; 6) have "average or usual" pain between 4 and 7 on a scale of 0-10 for the day before the clinic visit or for a typical day; and 7) able to participate in a pain evaluation and treatment program. This review considered studies to examine interventions for use in treatment of pain in lung cancer patients, including: biofeedback, cognitive/attentional distraction, imagery, hypnosis, and meditation. Any randomized controlled trials (RCTs) that examined cognitive behavioral therapy techniques for pain specifically in lung cancer patients were included. In the absence of RCTs, quasi-experimental designs were reviewed for possible conclusion in a narrative summary. Outcome measures were pain intensity before and after cognitive behavioural therapy techniques. The search strategy aimed to find both published and unpublished literature. A three-step search was utilised by using identified keywords and text term. An initial limited search of MEDLINE and CINAHL was undertaken followed by analysis of the text words contained in the title and abstract, and of the index terms used to describe the article. A second search using all the identified keywords and index terms was then undertaken across all included databases. Thirdly, the reference list of all identified reports and articles were searched for additional studies. Searches were conducted during January 1991- March 2014 limited to English and Thai languages with no date restriction. Materials and Methods: All studies that met the inclusion criteria were assessed for methodological quality by three reviewers using a standardized critical appraisal tool from the Joanna Briggs Institute (JBI). Three reviewers extracted data independently, using a standardized data extraction tool from the Joanna Briggs Institute (JBI). Ideally for quantitative data meta-analysis was to be conducted where all results were subject to double data entry. Odds ratios (for categorical data) and weighted mean differences (for continuous data) and their 95% confidence intervals were to be calculated for analysis and heterogeneity was to be assessed using the standard Chi-square. Where statistical pooling was not possible the finding were be presented in narrative form. Results: There were no studies located that met the inclusion requirements of this review. There were also no text and opinion pieces that were specific to cognitive behavioral therapy techniques pain and lung cancer patients.Conclusions: There is currently no evidence available to determine the effectiveness of cognitive behavioural therapy techniques for pain in lung cancer patients.

고흥지방 기상요인과 감자의 생육 및 수량과의 관계 (Relationship between Meteorological Elements and Yield of Potato in Goheung Area)

  • 박희진;권병선;신종섭
    • 한국자원식물학회지
    • /
    • 제14권2호
    • /
    • pp.133-138
    • /
    • 2001
  • 1987년부터 1995년까지 전남 고흥군의 농가포장에서 감자의 주요특성과 재배기간중 관측된 기상자료를 이용하여 생육 및 수량과 기상요인과의 상관관계, 분석 및 수량추정식을 유도한 결과는 다음과 같다. 1.기상요인 중 변이가 큰 것은 3월과 4월의 최저기온으로서 변이계수는 각각 368.0%, 126.0%였으며 5, 6월의 평균기온, 최고기온 및 최저기온은 비교적 변이가 적 었다. 2. 생육 및 수량형질의 변이계수에서 수량은 3.7%로 매우 낮아 품종고유의 유전특성의 지배를 많이 받는 반면, 경장은 14.3%, 경수는 9.3%로 높아서 어느정도 환경요인에 영 향을 받는것으로 나타났다. 3. 4월의 강수량 및 6월의 평균기온과 수량간에는 부의 상관으로 나타났다. 4. 생육 및 수량간에 는 모두가 정의 상관으로 유의성이 인정되었으며 4월의 강수량을 이용하여 경장을 추정한 결과 $Y_1$: 82.47-0.11X ($R^2$=0.3959)의 직선 회귀식을 유도할 수 있었고, 역시 4월의 강수량을 이용하여 수량을 추정한 결과 $Y_2$: 2003.61-0.94X ($R^2$=0.5418)의 직선 회귀식을 얻을 수 있었으며 이들에 대한 분산분석에서도 유의성이 인정되었기에 수량에 대한 추정식을 이용하여 이론적 수량과 실제 수량의 오차를 구한 결과 값이 같아서 잘 적중되었다.

  • PDF

Bis(ethylenediamine) cuprate(II)$\cdot$Dichromate의 합성 및 결정구조 연구 (Synthesis and Structure of Bis(ethylenediamine) cuprate(II)$\cdot$Dichromate)

  • 김승빈;남궁해
    • 한국결정학회지
    • /
    • 제16권1호
    • /
    • pp.38-42
    • /
    • 2005
  • Bis(ethylenediamine) cuprate(II)$\cdot$dichromate $Cu(C_2H_8N_2)_2{\cdot}Cr_2O_7$의 결정구조는 a=5.682(1), b=8.567(2), c=14.839(3) ${\AA},\;{\alpha}=97.50(2),\;{\beta}=101.06(1),\;{\gamma}=109.38(2)^{\circ}$, 삼사정계(Triclinic), 공간군 P-1, 공간군 번호 2이며, Z=2, V=653.9(2) ${\AA}^3,\;D_c=2.030gcm^{-3},\;{\mu}=3.273mm^{-1}$이었다. 구조분석은 중금속법으로 풀었으며, 최소 자승법으로 정밀화하였고, 최종 신뢰도 값들은 2291개의 회절반점에 대하여 $R_1=0.0256,\;R_w=0.0708,\;R_{all}=0.0316,\;S=1.151$이었다. 구리 착이온의 Cu-N의 평균 거리가 2.010(3) $\AA$이고, 면에 거의 수직으로 Cu-O 평균거리가 2.525(2) $\AA$로써 찌그러진 팔면체 구조를 하고 있다. 두 가지 이온들은 [111]-방향을 따라서 사슬구조를 형성하고, 이 축을 포함한 이차원 (0-11)면상에 놓인 인접한 축들 사이에는 N1-O5와 N3-O1 수소결합으로 연결되어 있다.

Genetic and Non-genetic Factors Affecting Mortality in Lori-Bakhtiari Lambs

  • Vatankhah, M.;Talebi, M.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제22권4호
    • /
    • pp.459-464
    • /
    • 2009
  • Data and pedigree information for Lori-Bakhtiari sheep used in this study were 6,239 records of lamb mortality from 246 sires and 1,721 dams, collected from 1989 through 2007 from a Lori-Bakhtiari flock at Shooli station in Shahrekord. The traits investigated were cumulative lamb mortality from birth up to 7 days, up to 14 days, up to 21 days, and up to 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 and 12 months of age. The models included fixed factors that had significant effects and random direct genetic, maternal genetic and maternal permanent environmental effects. Variance components were estimated using the restricted maximum likelihood procedure applying three animal models with and without maternal and common environmental effects. The overall mean of cumulative lamb mortality rate was 22.95% from birth to 1 year of age, while the overall mortality rate up to 3 and from 3 to 6 months of age was 6.14% and 12.76%, respectively. The mortality rate after 6 months of age declined as the lambs grew older. The age of dam had no important effect on lamb mortality. The type of birth was more important during the preweaning period than at later ages, and lamb mortality rate was higher in twins. The year of birth, month of birth and sex of lamb significantly (p${\leq}$0.01) affected the cumulative lamb mortality rate at all ages. The least square mean of mortality during the final one-third of the lambing period was higher than the first and middle onethird of the lambing period. Male lambs were found to be at a higher risk of mortality than females. Birth weight of the lamb had a highly significant (p${\leq}$0.01) effect on lamb mortality at all ages as a quadratic regression. Direct and maternal heritability estimates of lamb mortality ranged from 0.01 to 0.13 and 0.01 to 0.05, respectively. Direct heritability increased with age of lamb, while maternal effects (genetic and common environmental) were important in the preweaning period. These results indicate that lamb mortality can be reduced first through farm management practices and secondly by genetic selection. Both animal and maternal effects should be considered in breeding programmes for reducing lamb mortality at preweaning.

슬관절의 등속성 최대 반복 신전시 Hilbert-Huang 변환과 AR 모델을 이용한 근피로 평가 (Muscle Fatigue Assessment using Hilbert-Huang Transform and an Autoregressive Model during Repetitive Maximum Isokinetic Knee Extensions)

  • 김효신;최승욱;윤애란;이소은;신기영;최재일;문정환
    • Journal of Biosystems Engineering
    • /
    • 제34권2호
    • /
    • pp.127-132
    • /
    • 2009
  • In the working population, muscle fatigue and musculoskeletal discomfort are common, which, in the case of insufficient recovery may lead to musculoskeletal pain. Workers suffering from musculoskeletal pains need to be rehabilitated for recovery. Isokinetic testing has been used in physical strengthening, rehabilitation and post-operative orthopedic surgery. Frequency analysis of electromyography (EMG) signals using the mean frequency (MNF) has been widely used to characterize muscle fatigue. During isokinetic contractions, EMG signals present strong nonstationarities. Hilbert-Haung transform (HHT) and autoregressive (AR) model have been known more suitable than Fourier or wavelet transform for nonstationary signals. Moreover, several analyses have been performed within each active phase during isokinetic contractions. Thus, the aims of this study were i) to determine which one was better suitable for the analysis of MNF between HHT and AR model during repetitive maximum isokinetic extensions and ii) to investigate whether the analysis could be repeated for sequential fixed epoch lengths. Seven healthy volunteers (five males and two females) performed isokinetic knee extensions at $60^{\circ}/s$ and $240^{\circ}/s$ until 50% of the maximum peak torque was reached. Surface EMG signals were recorded from the rectus femoris of the right thigh. An algorithm detecting the onset and offset of EMG signals was applied to extract each active phase of the muscle. Following the results, slopes from the least-square error linear regression of MNF values showed that muscle fatigue of all subjects occurred. The AR model is better suited than HHT for estimating MNF from nonstationary EMG signals during isokinetic knee extensions. Moreover, the linear regression can be extracted from MNF values calculated by sequential fixed epoch lengths (p> 0.0I).

세 가지 방식으로 제작한 하악 총의치의 중합 전후에 따른 인공치아 위치 3차원 분석 (Three-dimensional analysis of artificial teeth position according to three type complete mandibular denture before and after polymerization)

  • 박진영;김동연;김원수;이광영;정일도;배소연;김지환;김웅철
    • 대한치과기공학회지
    • /
    • 제40권4호
    • /
    • pp.217-224
    • /
    • 2018
  • Purpose: The aim of this study was to evaluate accuracy of three type complete mandibular denture of before and after polymerization. Methods: Mandibular edentulous model was selected as the master model. 15 study models were made by Type IV stone. Wax complete mandibular dentures were produced by the denture base and artificial teeth. Before and after curing, STL files were obtained using a blue scanner. By superimposing the digitized complete mandibular denture data(after curing) with the CAD-reference(before curing) three-dimensionally, visual fit-discrepancies were drawn by calculating the root mean square (RMS) and visualized on a color-difference map. Each calculated RMS-value was statistically analyzed by 1-way analysis of variance(ANOVA) (${\alpha}=.05$). Results: Mean(SD) RMS-values was OM group $88.98(6.10){\mu}m$, BM group $82.35(13.46){\mu}m$, BDM group $77.83(9.46){\mu}m$. The results of the 1-way ANOVA showed no statistically significant differences in the RMS values of the Three groups for the material (P > .241). Conclusion : Deformation of artificial teeth position was observed in all groups after resin polymerization. But the values, all group were within the clinically acceptable range. The values of BDM group showed the least deformation than the other two groups.

정규크리깅을 이용한 우리나라 주변해역 일평균 해수면온도 격자지도화 및 내삽정확도 분석 (Ordinary Kriging of Daily Mean SST (Sea Surface Temperature) around South Korea and the Analysis of Interpolation Accuracy)

  • 안지혜;이양원
    • 한국측량학회지
    • /
    • 제40권1호
    • /
    • pp.51-66
    • /
    • 2022
  • 해수면온도는 지구 시스템에서 가장 중요한 메커니즘의 하나인 대기-해양의 상호작용을 단적으로 나타내며, 기후변화를 이해하는 데 필수적인 해양 기상요소이다. 이에, 공백 없이 시공간해상도가 일정한 격자자료는 해수면온도연구에 있어 그 활용도가 매우 높다. 이 논문에서는 2020년 해양 실측자료 137개 지점으로부터 최적화된 베리오그램을 도출하고 이를 이용한 정규크리깅을 통해 우리나라 주변해역의 일평균 해수면온도 격자지도를 산출하고 그 정확도를 평가하였다. 베리오그램 최적화는 가중최소제곱법을 이용하였고, 내삽정확도 검증을 위하여 공간적인 치우침이 없도록 객관적인 샘플링 기준을 적용하여 암맹평가를 수행하였다. 4회에 걸친 암맹평가 결과, 평균제곱근오차 0.995~1.035℃, 상관계수 0.981~0.982의 상당히 높은 정확도를 나타냈다. 계절별로는 여름철의 정확도가 상대적으로 약간 낮게 나타났는데, 이는 태풍의 영향으로 인한 급격한 수온 변동 때문으로 사료된다. 또한 가까운 바다보다 먼 바다에서, 동해, 남해보다 서해에서 상대적으로 정확도가 높게 나타났는데, 이는 가까운 바다에서 종종 반폐쇄해 지형으로 인해 해수의 물리적인 특성에 차이가 발생할 수 있기 때문인 것으로 보인다. 향후에는 계절별, 해역별 특성을 반영하는 SST 추정기법의 개선이 필요할 것이며, 개선된 자료는 우리나라 주변해역의 고품질 SST 합성장을 산출하는 앙상블 멤버로 활용될 수 있을 것으로 기대한다.