• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.265-271
• /
• 2016

DEA is a typical method that allows measurements and evaluations of the efficiency. This study examined the management efficiency of bean farm households to suggest factors that influence the management efficiency. The results showed that a larger cultivation area has more positive effects on the scale efficiency of beans farm households. When summing up farmer's family labor, lease fee, hired labor cost, which are strongly related to the workforce, it reached up to 54.6%. This means that they all occupy more than half of the production cost and they show an increasing trend. Moreover, although the hired labor rate is higher, it has more positive influences on the gross efficiency, technical efficiency and scale efficiency. In addition, the results showed that environmentally-friendly agriculture decreases the efficiency.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.69-75
• /
• 2014

Recently Amore pacific rack-type warehouse fire broke out and argue an urgent improvement of fire protection design code including automatic sprinkler and detection design. Various type of commodities have their unique fire characteristics from fire spread rate and heat lease rate and fire hazard depends on storage height, rack arrangement, aisle width, fire load etc. With increasing ceiling height for more storage space prevent effective water spray of sprinkler head, also delays detection time causes failure of early suppression. To achieve fire protection code performance of this occupancy, Major code articles relating to a classification of commodity, sprinkler system installation, detection and fire fighting are reviewed and suggested based on fire case analysis, code review between country and field survey.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.434-438
• /
• 2012

Purpose: This study was performed in order to improve problems and to seek the efficient operating plan by surveying and analyzing the actual status of operating the agricultural machinery rental business supported by the government. Method: The data was collected through two times of survey targeting lease business operators and the leasing business reports published for the past 3 years ('08~'10) 120 cities and counties. Results: As a result of surveying 120 cities and counties nationwide of operating the agricultural machinery rental business, 96% of agricultural machinery rental businesses were indicated to be operated in the form of short-term rent for about 1~3 days centering on small-sized agricultural machinery and attachment for upland crop. As for the unit number of possessing rental agricultural machinery and the purchase cost, it was indicated to be greatly reduced the agricultural machinery for rice farming and to be expanded into upland crop whose mechanization is insufficient. The annual rental days ('10) are 9.5 days/unit, thereby being a little insufficient. Rental fee for 1 day is 0.2~0.8% of the initial purchase cost of agricultural machine, thereby being greatly lower compared to 2.0% (annually 10-day rent) of the proper rents, resulting in being demanded improvement. Conclusions: To be continuously driven the rental business of agricultural machinery with having the ability to propagate, it is judged to be likely to necessarily collect optimum rental fee in consideration of rental days as well as increasing the use days per unit by buying the agricultural machinery, which is secured the rental demand, and by possessing the reasonable unit number.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.6
• /
• pp.139-149
• /
• 2007

The purpose of this study is to examine the problem of BTL(Build Transfer Lease) projects through comparative analysis on running costs, focusing on primary school, junior and senior high school education facilities, and then to provide useful information on the estimation of running costs by suggesting valid cost criteria. For this, eight schools from A and B consulting firms were sampled from capital region and other areas. Sampled schools were classified into four categories according to school grade, and running cost data are collected and analyzed from relative view points. The results of this study are as follows: 1) running costs which are analyzed by categories show some difference among sub-items, 2) major problems related to running cost prediction of BTL projects are revealed and improvement schemes are suggested for two groups (Owner and Project applicants).

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.2
• /
• pp.93-101
• /
• 2009

BTL projects, which has been 3 years since it was carried out in 2008, trigged the controversy on the adequacy in the calculation of disbursement for Government due to such problems as low earning rate and the burden of service level compared with the project suggestion. Thus, the purpose of this study is to offer a suggestion on the calculation system for the purpose of the standardized - expense appropriation by item and database including the antecedent study on the finance model and the feasibility in BTL projects. The system is composed of 4 steps - project management, basic database, an analysis on expense by item and the result, and an analysis on sensitivity, and it is possible to carry out a comparative analysis on single and multi alternatives by variable change along with the ground on expense calculation.

• 기술발표회
• /
• s.2006
• /
• pp.279-291
• /
• 2006

This study shows decision-making process for selection of cutoff wall on a wastewater treatment project. There are 10 different cut-off wall methods So, we examine the site to gather information for find appropriate methods. After using that information, 10 cutoff wall methods are reviewed for analysis. Through brainstorming, four alternatives are selected for design VE item. Following the standard VE process, we established performance criteria and evaluated function score(F) using questionnaire. The questionnaires, brainstorming and AHP method for weighting on performance criteria and evaluate function score increased the reliability of this selection process. Water Jet method, one of four methods, has the best function score(F=92.71) and the lease construction cost(as cost index 1,000). The value score also highest as 92.7, so we select the method. The result is value innovation type In addition, the authors try to calculate the environmental burden in selection process using LCA. We cannot conduct the full LCA as defined ISO, so perform Simple LCA In LCA result, the cut-off grouting has the least environmental burden as index 9.09E+01 and Water Jet method has following as the second. To selection best method to specific area and purpose, design VE/LCG process used as useful tool and it is needed to develop integrated method that evaluate VEILCC and LCA as one-set process.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.209-222
• /
• 2020

The purpose of this paper is to predict the future changes of housing through the Delphi technique. The targets to predict were set by housing type, housing space, housing demand, and architectural technology. The results were as follows: ① The influences of social and value perspectives on the change of housing type, space, and demand would be high, on the other hands, the influence of political perspective would be low. ② In terms of housing type, the increase in demand for downsizing housing for high-rise buildings and the possibility of realizing remote medical support services and homecare using big data are highly predicted. That is, ③ it is anticipated that IoTs will have a significant influences on future housing changes, and ④ enactment of co-housing and related laws by the sharing economy, services for maintenance through the supply of high-rise and high-density homes, housing support for residents, and advanced lease markets by developed architectural technology are expected as anticipated forms of future housing.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.2
• /
• pp.233-250
• /
• 2008

This paper aims to analyze the characteristics of BTL, and to propose the effective models connecting BTL and project finance, through the analysis of current state and case study of BTL. The main results of this study are as follows. Firstly, BTL business have been increasing fast, and most of projects are middle size projects below 100 billion Won. Nextly, key suggestions for improving BTL business model are analyzed, which are, first, risk allocation between public and private interests, second, improvement of method for selecting private investment consortium, and third, alleviation of long-term burden of local finance. Finally, effective models for connecting BTL and project finance, which are, first, model for using asset backed securities, second, model for dividing project corporations into construction corporation and operation corporation, and third, model for risk allocation between public and private interests.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.192-203
• /
• 2012

As a leading nation of ubiquitous technology, South Korea has been promoting u-City pilot projects throughout the country. According to 'Fundamental Construction Law of u-City,' u-City projects are classified into old-town and new-town types. However, most projects have focused only on the new-town type. Pushing forward large-scale land development projects, Korea Land and Housing Corporation (LH Co.) under Ministry of Land Transport and Maritime Affairs (MLTM) has gained a development profit out of the u-City infrastructure and then donated the infrastructure to a local government without making any plan for operations. In the process of u-City pilot projects, old-towns have been relatively ignored and various of unexpected problems have emerged. Building the u-City of an old-town is not easy due to many constraints such as huge initial investment, long validity and verification procedures, lack of useful services for citizens, lack of professional outsourcing methods for business promotion, high operating costs of the integrated control center, inadequate law related, insufficient institutional requirements and so on. This paper introduces a case study on u-City development for an old-town, Ansan City, as a private investment project. The case will help boost u-City projects for old-towns by solving their problems and providing an effective operational mechanism. As the first BTL (Build-Transfer-Lease) project for constructing u-City, 'Broadband Information Network Development Project' of Ansan City will provide a reference model of expanding u-City projects for other cities.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.43-59
• /
• 2012

As contemporary building construction type is getting higher and deeper,construction equipment usage is getting more, and related fatal accidents are on an increasing trend. In these days, due to the deteriorating construction business circumstance, job finding problem of equipment operator, and dumping contract, equipment lease suppliers are putin jeopardy. In high-rise building construction, especially tower crane, mobile elevated work platform and other High place operation cars among construction equipment cause many critical accidents because of drop supply of construction biding bringing out dumping contract could cause unsafe and poor construction management. Because of this, a method was drawn which could grasp the present state of construction equipment management and manage safety of the equipment more easily for accident prevention by choosing 2 kinds of Construction equipment which cause safety accident frequently among the equipment mainly used in construction site. This study suggested a method about construction equipment safety management using "smart phone" base which could be used in safety management for construction equipment by whomever in construction site. After attachment of QR code included safety checklist, It became possible that site managers could check more efficiently by scanning with their smart phone when they inspect equipment. Moreover, by the construction interested who didn't know what and how they have to inspect could point out unsafe condition in the early stage of equipment entering or take unsafe one out of the site by using new smart phone safety checking system is installed, it became possible that critical accident caused by construction equipment was prevented in advance.