• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5502-5512
• /
• 2014

최근까지의 종합군수지원 개발은 정비계획, 지원장비, 보급지원, 군수지원교육 등 ILS 지원성요소의 개발, 획득에 주로 초점을 두었다. 이제는 장기적인 관점에서 무기체계의 운용유지와 총수명주기관리체계(TLCSM)와 같이 지속유지성을 강조하는 제도 등을 고려하여 지원성 분야의 효율성 증대, 비용절감 등 린(LEAN) 관점에서 지원성 전략과 정책이 필요할 때이다. 본 논문에서는 ILS 이론, 린 개념, 린 메인터넌스의 이론적 배경을 살펴보고 이를 바탕으로 군수지원 측면의 린 메인터넌스 프레임워크를 제시하고 정비 전략을 제시하였다. 또한 레이더 체계의 금속형 필터에 대한 린 예방정비(PM) 사례를 정비 시간, 정비 인시, 정비 비용 3가지 측면에서 분석하였다. 마지막으로 무기체계의 지원성요소 측면에서 추진 방향을 제시하였다.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.11-21
• /
• 2013

PURPOSES: As pavement generally provides service shorter than an expected life cycle, maintenance cost increases gradually. In order to help extending the service life and reduce maintenance cost, a new multi-functional composite pavement system is being developed in Korea. METHODS: This study is a part to develop the multi-functional composite pavement and is to investigate the mechanical performances of fiber-reinforced lean concrete for pavement subbase. The inherent problem of fiber reinforced concrete is dispersion of fibers in concrete mix. This study additionally evaluated fiber dispersion characteristics with respect to different fiber types. RESULTS: From the test results, the compressive strengths of the concretes satisfied the required limit of 5MPa at 7days. The standard deviation of the measured number of fibers were lower in the order of nylon, steel fiber and polypropylene. CONCLUSIONS: Reject ash was shown to be satisfactory as a replacement material to Portland cement in lean concrete base. The fiber volume fraction is suggested to be 0.4% even though the fracture toughness did not vary significantly with respect to fiber types. However, fracture energy absorbed up to complete failure increased with the increased fiber volume fraction increment.

• 대한안전경영과학회지
• /
• 제14권2호
• /
• pp.147-158
• /
• 2012

This paper aims to develop a new chain metrics for obtaining lean Overall Equipment Effectiveness(OEE) and present implementation strategy which considers the properties for Total Productive Maintenance(TPM) to reduce machine losses, Performance Analysis and Control(PAC) to reduce labor losses, Lean Production System(LPS) to reduce floor wastes, and Theory of Constraints(TOC) to minimize the problem of Capacity Constrained Resource(CCR). The study reviews the related literatures and reformulates the structure of machine losses, labor losses and field wastes. The research also develops the integrated productivity metrics according to time, units, reliability and maintainability. It is found that the study develops the actual productivity measure in terms of efficiency, effectiveness and standard productivity. In addition to that, it outlines and develops by using the integrated LPS and TPM, lean OEE measures such as Time Based Productivity(TBP), Unit Based Productivity(UBP), and Reliability & Maintainability Based Availability(RMBA). Implication examples are proposed to make it easier and available for practioners to understand the implementation strategies about TPM OEE, lean OEE and TOC OEE. Futhermore related to other studies, the research contributes to create a new chain productivity measures to clear the interrelationship concepts of productivity, efficiency and effectiveness. Moreover the paper develops the enhanced OEE measures by integration of TPM, PAC, LPS and TOC with the perspective of schedule, throughput, reliability, maintainability and availability.

• 건설관리
• /
• 제16권6호
• /
• pp.28-31
• /
• 2015

• 대한안전경영과학회지
• /
• 제17권1호
• /
• pp.321-335
• /
• 2015

This study introduces the methods to apply and develop the integrated Cost of Quality (COQ) and Time-Driven Activity-Based Costing (TDABC) model for seeking not only quality improvement but also reduction of overhead cost. Inefficient and uneconomical COQ activities can be identified by using time driver which also maximizes the quality improvement for Prevention-Appraisal- Failure (PAF) quality costs. In contrast, reduction of the indirect cost of unused capacity resource using Quality Cost Capacity Ratio (QCCR) of TDABC minimizes overhead cost for COQ activities. In addition, linkage between Overall Equipment Effective (OEE) and Time Driver develops the integrated system of Total Productive Maintenance (TPM) and TDABC model. Lean OEE maximizes when an Unused Time (UT) of TDABC that are TPM losses and lean wastes reduces whereas the TPM Cost Capacity Ratio (TCCR) of TDABC minimizes indirect cost for non-value added TPM activities. Numerical examples are derived to better understand the proposed COQ/TDABC model and TPM/TDABC model from this paper. From the proposed model, process mapping and time driver of TDABC are known to lessen indirect cost from general ledger of comprehensive income statement with a better quality innovation and improvement of equipment.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권5호
• /
• pp.692-698
• /
• 2005

Two experiments were conducted to examine the effect of graded levels of dietary chromium and leucine, and different fat sources on performance and body composition of broiler chickens. The results showed that chromium picolinate at 0.5 ppm significantly (p<0.05) lowered the carcass fat level. Gut weight and carcass water content were increased as a result of chromium treatment. Body weight, plucked weight, carcass weight, abdominal fat pad weight, breast yield and feed efficiency were unaffected by chromium treatment. Leucine did not interact with chromium to effect lean growth. Dietary leucine above the recommended maintenance level (1.2% of diet) markedly (p<0.001) reduced the breast muscle yield. The addition of fish oil to broiler diets reduced (p<0.05) the abdominal fat pad weights compared to birds on linseed diets. Fish oil is believed to improve lean growth through the effects of long chain polyunsaturated fatty acids in lowering the very low-density lipoprotein levels and triglyceride in the blood, in the meantime increasing glucose uptake into the muscle tissue in blood and by minimizing the negative impact of the immune system on protein breakdown. The amount of fat in the diet (2% or 4%) did not affect body composition.

• Journal of Community Nutrition
• /
• 제5권1호
• /
• pp.21-28
• /
• 2003

A study was conducted to investigate the anthropometric indices, fat distribution, eating habits and levels of daily physical activity based on the body mass index (BMI ; kg/㎡) of 180 female college students. This stady was based on survey 2001 using a questionnaire. The results are as follow ; The mean age, height, weight and BMI were 20.41 ${\pm}$ 1.82 years, 161.86 ${\pm}$ 4.51cm, 53.49 ${\pm}$ 7.02kg, and 20.43 ${\pm}$ 2.65kg/㎡, respectively. The group with BMI of under 20 (the lean group) comprised 48.9% : the group with BMI of 20 to 25 (the normal group) comprised 44.4% and the group with BMI of over 25 (the obese group) comprised 6.7% of the subjects. Even though the lean and the normal groups were determined according to BMI. 12.5% of the lean group and 31.3% of the normal group had more than 25% body fat. Of the students, 11.5% of the lean group, 25.0% of the normal group and 58.3% of the obese group had of more than 0.8 waist/Hip Ratio (WHR). The medical problems suffered by the subjects were constipation (24.4%), gastroenteritis (20.6%), anemia(15.0%) and edema(13.3%), which was a result of their eating habits. Out of all the subjects, 27.2% ingested their meals irregularly, 74.4% skipped breakfast, and 92.4% of the lean group, 89.2% of the normal group and 81.8% of the obese group ingested snacks on a daily basis. Their favorite types of snacks were cookies breads and cakes (33.7%), spicy sliced rice cakes pork sausage and boiled fish cakes (18.5%), fruits (15.2%), juices and sodas (13.5%) and hamburgers and pizzas (3.9%). Their consumption of high calorie and processed foods was high, Of the subjects, 38.9% ate out daily. 45.1% had tried weight loss. Those with large upper bodies comprised 11.5%, large intermediate bodies 18.5% and large lower bodies 69.0%. Most of the students were dissatisfied with their body snaps. Of the subjects, 95.1% exercised irregularly. Daily physical activity tended to increase significantly with an increase in BMI : the lean group's average energy consumption was 1509.40㎉ the normal group's was 1792.21㎉ and the obese group's was 2334.63㎉, which were below the recommended value. This study suggests that the maintenance of an ideal weight, the improvement of eating habits and adequate exercise are needed for female college students to improve their health and nutritional status. (J Community Nutrition 5(1) 21∼28, 2003)

• 한국연소학회지
• /
• 제20권4호
• /
• pp.10-18
• /
• 2015

Combustion instability is a major issue in design and maintenance of gas turbine combustors for efficient operation with low emissions. With the thermoacoustic view point the instability is induced by the interaction of the unsteady heat release of the combustion process and the change in the acoustic pressure in the combustion chamber. In an effort to study the combustion dynamics of gas turbine combustors, Morgans et al (2014) have developed OSCILOS (open source combustion instability low order simulator) code and it is currently available online. In this study the code has been utilized to predict the combustion instability of a reported case for lean premixed gas turbine combustion, and then its prediction results have been compared with the corresponding experimental data. It turned out that both the predicted and the experimental combustion instability results agree well. Further the effects of some typical inlet acoustic boundary conditions on the prediction have been investigated briefly. It is believed that the validity and effectiveness of the open source code is reconfirmed through this benchmark test.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권11호
• /
• pp.479-489
• /
• 2020

The purpose of this paper is to uncover whether and how contextual factors (information exchange, participation, trust in management, and training), relate to resistance to change. It also explores the mediating effect of perceived impact of change on the relations between contextual factors and resistance to change. This study is conducted in several manufacturing plants in food processing industry in Vietnam, which is implementing a top-down large-scale change - Lean transformation, adopting Total Productive Maintenance (TPM) program, to be specific. The findings suggest that all four contextual factors are negatively associated with resistance to change, in which training had the strongest impact. Also, the perceived change impact partially mediates the relationships between the four contextual factors and resistance to change. The practical implications of this paper are that employees who receive adequate, timely and useful information relating to change are less likely to show opposing behaviors towards change. Fostering trust in management among employees, and employee involvement in decision-making, also have a significant influence when addressing employee resistance to change. Employees who are well-trained, well-equipped with tools and knowledge about the change, are less likely to resist as they view the benefits of changes more significant than the risks.

• 품질경영학회지
• /
• 제44권3호
• /
• pp.639-648
• /
• 2016

Purpose: Existing precedent studies include success factors of individual management innovation activities constantly. However, those studies have limitations about the common key success factors of individual management innovation activities. Methods: For this study, we investigate the key success factors using literature research of the most typical management innovation activities adopted and implemented by many companies in Korea, such as 6sigma, TQM, Lean 6sigma, ERP, TPM, BPR, Project Management, System Engineering. Factors emerging repeatedly was combined into common factors and inherent factors that are necessary for the success of individual management innovation activities are designated to essential factors. Results: 'Essential factors for Six Sigma' consist of 5 items. Black belt operating system, personnel management system linkage, the correct management of the data, perform improvement projects associated with financial performance financial result, linked to financial performance improvement project, project progress management. 'Essential factors of TQM' are arranged 4 items. Quality team's independence and role, goal-setting, Quality Information System, corporate's philosophy of quality first. 'Essential factors of Lean Six Sigma' are the selection of value stream which is based on the customer needs and the value creation and identify the project based on the selected value in the company. 'Essential factors of ERP' are investigated 6 items. Ongoing system maintenance and upgrades, the measurement and support of user satisfaction, the operating systems and the policies for the maintenance, IT infrastructure, change adaption condition monitoring, focusing on improving business performance. 'Essential factors for TPM' are arranged 4 items. Motivated and energetic Bottom-Up, CEO's recognition of the importance facility management, long-term perspective of necessity and ongoing patience. 'Essential factors for BPR' are the pursuit of change process and the staff's sense of crisis management. 'Essential factors for Project Management' are the strategy that reduce the risk management skills through risk management and the understanding and organized management for the project participant's needs. 'Essential factors for System Engineering' consist of 2 items. The first is the design for the best balanced system with pre-analysis about the compromise the cost, schedule and the performance. The second is the analysis of large problem into small problems which can solved. We have found the solution considering components of the interface through the systematic perspective. Conclusion: Common factors and essential factors presented in this study will properly help to introduce the individual management innovation activities for the each business sector and implement management innovation. After this study, new literature research that reflect new studies should accomplish steadily.