• 대한전자공학회논문지SD
• /
• 제39권4호
• /
• pp.35-40
• /
• 2002

일함수가 낮은 바나듐과 몰리브덴을 장벽금속으로 사용하여 초절전형 SBR을 제조하였다. 일함수가 낮은 장벽금속을 사용함으로서 나타나는 역방향 누설전류를 감소시키기 위해 n-Si층에 아르곤 이온을 1×10/sup 14/ ion/㎠, 40 keV로 주입하였다. 제조된 소자의 전기적 특성은 60 A/㎠의 동일한 전류밀도에서 Mo-SBR의 V/sub F/는 0.39 V이고 V-SBR은 0.25 V로서 매우 낮은 V/sub F/를 나타내었다. 이에 따라 아르곤 이온주입에 의해 제조된 Y-SBR의 역방향 누설전류는 일반적인 V-SBR과 비교하여 20㎂ 이상 감소됨을 확인할 수 있었다. 또한, 아르곤 이온주입으로 인한 소자의 특성저하는 나타나지 않았다.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.163-172
• /
• 2011

Oxidation models of a rotor bar and end ring segment in an induction motor are presented to simulate the behavior of an induction machine working with oxidized rotor parts which are modeled as rotor faults in progress. The leakage inductance and resistance of the rotor parts arc different from normal values because of the oxidation process. The impedance variations modify the current density and magnetic flux which pass through the oxidized parts. Consequently, it causes the rotor asymmetry which induces abnormal harmonics in the stator current spectra of the faulty machine. The leakage inductances of the oxidation models are derived by the Ampere's law. Using the proposed oxidation models, the rotor bar and end ring faults in progress can be modeled and simulated with the motor current signature analysis (MCSA). In addition, the oxidation process of the rotor bar and end ring segment can motivate the rotor asymmetry, which is induced by electromagnetic imbalances, and it is one of the major motor faults. Results of simulations and experiments are compared to each other to verify the accuracy of the proposed models. Experiments are achieved using 3.7 kW, 3-phase, and squirrel cage induction motors with a motor drive inverter.

• 대한전자공학회논문지SD
• /
• 제42권1호
• /
• pp.1-8
• /
• 2005

Sol-gel 법을 이용하여 Pt/TiO/sub x/SiO₂/Si 기판 위에 3.14×10/sup -4/㎠ 의 상부전극 면적을 갖는 PLT(5) 박막을 제작하여 스위칭 및 retention 특성에 대해 연구하였다. 4V 에서 3.56×10/sup -7/A/㎠의 누설전류밀도 값을 갖는 우수한 PLT(5) 박막에 펄스전압을 2V 에서 5V 까지 인가하였다. 펄스전압 증가에 따라 스위칭 시간은 0.52㎲ 에서부터 0.14㎲ 까지 감소하는 경향을 나타냈으며, 부하저항을 50Ω 에서 3.3Ω 으로 증가시킴에 따라 스위칭 시간이 0.14㎲에서 13.7㎲ 로 증가하는 것이 관찰되었다. 인가된 펄스 전압에 대한 스위칭 시간의 관계로부터 구한 활성화 에너지(Ea) 는 135kV/cm 이었다. PLT(5) 박막의 이력곡선과 분극 스위칭 실험으로부터 구한 switched charge density 사이의 오차는 약 10% 정도로 비교적 잘 일치하였으며, retention 특성은 105s 이후에도 약 8% 정도의 우수한 분극 감소 특성을 나타내었다.

• 한국재료학회지
• /
• 제10권9호
• /
• pp.607-611
• /
• 2000

고밀도 DRAM에서 박막 커패시터로의 적용을 위해 Zr이 첨가된 (Ba(sub)1-x, Sr(sub)x)TiO$_3$<원문차조> 박막이 r.f. magnetron sputter-ing 법에 의해 제조되었다. 증착된 박막들은 다결정질 구조를 보였으며 증착압력이 감소함에따라 Zr/Ti의 비가 현저히 증가하였으며 본 연구에서는 얻어진 박막들은 100kHz에서 380∼525의 유전상수값을 나타냈다. 전압에 따른 커패시턴스와 분극량의 변화는 이력특성을 크게 보이지 않아 상유전상으로 형성되었음을 보였다. 누설전류밀도는 증착압력이 감소함에 따라 작아지는 경향을 보였고 10mTorr이상에서 증착된 박막의 경우 200kV/cm의 전계에서 10(sup)-7∼10(sup)-8A/$\textrm{cm}^2$의 차수를 갖는 누설전류밀도를 보여 본 연구에서 제조된 (Ba(sub)1-x, Sr(sub)x)(Ti(sub)1-x, Zr(sub)x)O$_3$<원문참조>박막은 고밀도 DRAm을 위한 커패시터에의 적용가능성을 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.347-348
• /
• 2013

To obtain high conversion efficiency in InGaN-based solar cells, it is critical to grow high indium (In) composed InGaN layer for increasing sun light absorption wavelength rage. At present, most InGaN-based solar cells adopt InGaN/GaN multi-quantum-well (MQW) structure for high crystalline quality of InGaN with high In composition. In this study, we fabricated and compared the performances of two types of InGaN/GaN MQW solar cells which have the 15% (SC 15) and 25% (SC 25) of In composition at quantum well layer. Although both devices showed similar dark current density and leakage current, SC 15 showed better performance under AM 1.5G illumination as shown in Fig. 1. It is interesting to note that SC 25 showed severe current density decrease as increasing voltages. As a result, it lowered short circuit current density and fill factor of the device. However, SC 15 showed steady current density and over 75 % of fill factor. To investigate these differencesmore clearly, we analyzed their photoluminescence (PL) spectra under various applied voltages as shown in Fig. 2. At the same time, photocurrent, which was generated by PL excitation, was also measured as shown in Fig. 3. Further, we investigated the relationship between piezoelectric field and performance of InGaN based solar cell varying indium composition.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.348-352
• /
• 2014

In light of the sure protection function, the most important factors of a varistor are the clamping voltage ratio and degradation characteristics. The degradation characteristics of Pr/Co/Cr/Er co-doped zinc oxide varistors were investigated by impulse currents (0.4~2.1 kA) stress for the specified content of $Er_2O_3$ (0.5 and 2.0 mol%). The varistor doped with 2.0 mol% $Er_2O_3$ exhibited the best clamp characteristics, with the clamp voltage ratio (K) in the range of K = 1.63~1.88 at the impulse currents of 5-50 A. However, the varistor doped with 0.5 mol% exhibited excellent electrical stability, with variation rates for the breakdown field, for the nonlinear coefficient, and for the leakage current density of -6.9%, -12.6%, and -14.3%, respectively, after application of an impulse current of 2.1 kA. In contrast, the varistor doped with 2.0 mol% was destroyed after application of an impulse current of 1.2 kA.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.735-744
• /
• 2000

The electrical procerties and stability of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_2$O$_3$-Er$_2$O$_3$ (ZPCCE) based varistors were investigated in the Er$_2$O$_3$content range of 0.0 to 4.0 mol%. ZPCCE ceramics containing 2.0 mol% Er$_2$O$_3$ exhibited the highest density of 5.74 g/㎤ corresponding to 99.3% of theoretical density. The varistors with 0.5 mol% and 2.0 mol% Er$_2$O$_3$exhibited a relatively satisfying nonlinearity, which the nonlinear exponent is 40.50 and 47.15, respectively and the leakage current is 2.66 $mutextrm{A}$, respectively. Under more severe d.c. stress, such as (0.80 V$_{1mA}$/9$0^{\circ}C$/12h)+(0.85 V$_{1mA}$115$^{\circ}C$/12h)+(0.90 V$_{1mA}$12$0^{\circ}C$/12h)+(0.95 V$_{1mA}$1$25^{\circ}C$12h), they showed a very excellent stability, which the variation rate of the variator voltage is -0.89% and -0.15%, the variation rate of the nonlinear coefficient is -4.67% and -3.56%, and the variation rate of leakage current is -6.02% and -19.56%, respectively. It is surely bellived that ZnO-0.5 mol% Pr$_{6}$O$_{11}$-1.0 mol% CoO-0.5 mol% Cr$_2$O$_3$-x mol% Er$_2$O$_3$(x=0.5, 2.0) based varistors will be greatly contributed to develop the advanced Pr$_{6}$O$_{11}$-based ZnO varistors in future.uture. future.uture.

• 한국세라믹학회지
• /
• 제39권12호
• /
• pp.1128-1132
• /
• 2002

MFS-FET(Metal-Ferroelectric-Semiconductor Field Effect Transistor) 구조의 비휘발성 기억소자용 $ReMnO_3$(Re:Y, Ho, Er) 박막을 금속 유기 화학 기상 증착법(MOCVD)으로 증착하였다. $ReMnO_3$ 박막을 Si(100) 기판 위에 700${\circ}C$-2시간 증착 시켜 결정화를 위해 대기 중에서 900${\circ}C$-1시간 열처리 시 육방정계(hexagonal) 단일상의 $ReMnO_3$ 박막을 형성하였다. 육방정계 단일상 구조에서 $ReMnO_3$ 박막의 강유전 특성은 c-축 배향성에 의존하였으며, c-축 배향성이 우수한 $YMnO_3$ 박막의 잔류 분극(Pr) 값은 105 nC/$cm^2$로 가장 우수하였다. 또한 누설 전류 밀도(leakage current density) 값은 미세구조의 결정립 크기에 의존하였으며, 결정립 크기가 100∼150 nm인 $YMnO_3$ 박막의 누설 전류 밀도 값은 인가전압 0.5 V에서 $10^{-8}$ A/$cm^2$을 나타내었다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.69-72
• /
• 2012

In this study, deposition of low-dielectric constant SiOC(H) films by conventional plasma-enhanced chemical vapor deposition (PECVD) were investigated through various characterization techniques. The results show that, with an increase in the plasma power density, the relative dielectric constant (k) of the deposited films decreases whereas the refractive index increases. This is mainly due to the incorporation of organic molecules with $CH_3$ group into the Si-O-Si cage structure. It is as confirmed by FT-IR measurements in which the absorption peak at 1,129 $cm^{-1}$ corresponding to Si-O-Si cage structure increases with power plasma density. Electrical characterization reveals that even after fast thermal annealing process, the leakage current density of the deposited films is in the order of $10^{-11}$ A/cm at 1.5 MV/cm. The reliability of the SiOC(H) film is also further characterized by using BTS test.

• 전기의세계
• /
• 제23권4호
• /
• pp.39-45
• /
• 1974

In most previous research work, the transverse edge effect has been allowed for only by use of a relativity-increase factor. This paper gives a more exact treatment. A two-dimensional-field analysis is presented for the problem of sheet rotor linear induction motor with finite width the method used takes account of flux leakage in the space between the stator and secondary sheet rotor as well as in the secondary itself. Equations are derived for the flux density distribution in the air gap and for the starting face, in each case as a function of stator current. The cross gap flux density peaks towards athe edge of the stator. This phenomena is known as the transverse edge effect. Measurements of the flux density in the air gap and starting force on a linear induction motor with sheet rotor of different width showed a reasonable agreement,suggest that it would be desirable to take into account also, at least for this motor in which severe redistribution occurs.