• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1127-1132
• /
• 2003

Suspension system of vehicle have enough endurance during its life time to protect passenger. Spring is one of major part of vehicle. Thus, a fatigue strength evaluation for leaf spring based on road load response was carried out. At first, strain of leaf spring is measured on the city condition and proving ground condition. And next, the damage analysis of road load response data was carried out. And fatigue test of leaf spring were also carried out. Based on -N life relation, fatigue life of leaf spring was evaluated at belgian mode, city mode and drawing test specification. After that, it is compared the design life of leaf spring and evaluated fatigue life by belgian mode, city mode and drawing test specification. From the above, the maximum load-fatigue life relation of leaf spring was defined by test. and new test target of belgian mode and city mode was proposed to accept design specification of leaf spring. It is expect that proposed test target can verify leaf spring fatigue endurance at specific road condition.

• 대한임베디드공학회논문지
• /
• 제18권4호
• /
• pp.151-157
• /
• 2023

RPL (IPv6 Routing Protocol for Low-power Lossy Network) is a standardized routing protocol for LLNs (Low power and Lossy Networks) by the IETF (Internet Engineering Task Force). RPL creates routes and builds a DODAG (Destination Oriented Directed Acyclic Graph) through OF (Objective Function) defining routing metrics and optimization objectives. RPL supports a leaf mode which does not allow any child nodes. In this paper, we propose INFRA-RPL which provides a dynamic leaf mode functionality to a leaf node with the mobility. The proposed protocol is implemented in the open-source IoT operating system, Contiki-NG and Cooja simulator, and its performance is evaluated. The evaluation results show that INFRA-RPL outperforms the existing protocols in the terms of PDR, latency, and control message overhead.

• 한국멀티미디어학회논문지
• /
• 제13권10호
• /
• pp.1487-1493
• /
• 2010

H.264는 기존의 표준안들보다 좋은 성능을 내기 위해서 더 세밀하고, 더 많은 움직임 정보를 처리한다. 하지만, 움직임 벡터가 기존 표준안에 비해 높은 비율을 차지하게 되어 이에 대한 고려가 필요하게 되었다. 본 논문에서는 움직임 벡터를 효율적으로 처리하기 위해 단말 모드를 사용하는 새로운 방법을 제안한다. 제안하는 알고리즘은 단말 모드를 이용하여 모드들의 분포를 집중시키고, 더 적은 모드 종류를 이용하여 움직임 벡터의 압축을 수행한다. 본 논문에서 제시하는 알고리즘은 현재의 $4{\times}4$ 움직임 벡터 행렬 뿐만 아니라 $8{\times}8$ 행렬 등으로 확장시킬 수 있다. 제안하는 알고리즘은 헤더에서 12.68%, 전체 비트스트립에서 9.7%의 감소율을 보여준다.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.36-42
• /
• 2010

In this study, the deformation and stress are analyzed through modal and harmonic response analysis at resonance on leaf spring. The displacement range of 7 to 14 mm is shown at natural frequencies as 6 kinds of resonance modes. The maximum deformation is shown as 8.8781mm at Mode 2. The maximum displacement and stress at leaf spring are shown as 0.0458 mm and 72.533 MPa respectively on 1200 Hz. The comfortability of passenger becomes better on leaf spring at suspension system by use of this design model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.515-520
• /
• 2008

This paper develops a mite element model of a polygon mirror scanner motor supported by the sintered bearing and flexible supporting structures to analyze the shock response by using the finite element method and the mode superposition method. The validity of the proposed model is verified by comparing the simulated natural frequencies and shock response with the experimental ones. It investigates the displacement and the stress of the most vulnerable component, i.e. a leaf spring due to shock, and it proposes a robust design of leaf spring of a polygon mirror scanner motor against shock.

• 한국작물학회지
• /
• 제43권3호
• /
• pp.135-140
• /
• 1998

Diallel analysis was conducted with FI's derived from crossing in all combinations without reciprocals among six rice varieties; three tropical japonica and three temperate japonica varieties, with different traits associated with panicle and flag leaf. Epistasis was observed in the number of primary branches (PB) per panicle and of spikelets per panicle, while flag leaf length, flag leaf color, PB length and neck node thickness were explained with the additive-dominance model. The estimated genetic mode of flag leaf length and PB length was a positive complete dominance model with high heritability, and that of flag leaf color and neck node thickness was an incomplete dominance model. In particular, tropical japonica varieties with low-tillering and heavy-panicle appear to have higher number of dominant genes for flag leaf length and PB length than temperate japonica varieties.

• 한국해양공학회지
• /
• 제5권1호
• /
• pp.64-70
• /
• 1991

The design theory of roller gate has been systematized laying more emphasis on practical formulas than theoretical ones and the design procedure of the existing gate facilites is reviewed and analyaed on economical viewpoint and safety factor. The design theory of timoshenko, the thechnical standards for hydraulic gate and penstock of Japan, and the design standards for waterworks structures of Germany are applied to the study of optimal design of a gate leaf. In this study, gate leaf which is now being operated for water control at the seadike, estuary dam and reservoir dam are adopted as a mode, and a new design method by the computer is proposed through the variation of design elements within practical ranges. As a result, safety factor and economical design can be made by using T-beams to the horizontal and vertical beam of the gate leaf instead of H-beams used in the existing seadike roller gate at Asan, and total weight of gate leaf is reduced by the present optimization.

• Journal of Plant Biology
• /
• 제18권1호
• /
• pp.1-10
• /
• 1975

Development of a model system for mode of action studies of $SO_2$ was attempted with a plant tissue. Leaf disks, 1.0cm diameter, cut from the lamina of lettuce leaves, were floated on the testing medium and placed in light or dark condition to investigate the discoloration pattern with various sources of $SO_2$. Discoloration of leaf disks tended to be more serious with higher concentrations of $SO_2$ and on exposure to the light. Leaf disks were more severely discolored at lower pH with constant SO2 concentration. These discoloration patterns were highly reproducible and similar in all sources of $SO_2$. Spectrophotometric evidence suggested that light-mediated discoloration of leaf disks in the presence of $SO_2$ might occur mainly through chlorophyll ${\alpha}$ degradation.

• 한국환경복원기술학회지
• /
• 제16권2호
• /
• pp.53-61
• /
• 2013

The present study elucidated the growth properties of Sasa borealis communities distributed in the lower layer of deciduous broadleaf forests in temperate zones and analyzed the correlation between the growth properties of S. borealis and positional environmental factors. The higher the culm height of S. borealis was, the higher the values of the leaf number, leaf area, and foliage layer thickness became. This might be because as the culm height of S. borealis increased, the acquisition of light sources became easier so that the biomass of leaves increased simultaneously for smooth anabolism. S. borealis seem to change their growth mode for smooth acquisition of light resources. The culm density of S. borealis and the leaf number, leaf area and foliage layer thickness of S. borealis did not show any clear correlation. The values of the culm height, leaf number, leaf area, and foliage layer thickness of S. borealis as the above altitude of the location of S. borealis increased. It seems like that growth conditions such as temperatures and winds are deteriorated as the above altitude of the location of S. borealis increased so that S. borealis becomes smaller. No clear correlations were shown between the physiochemical properties of soil and S. borealis' growth properties. It seems like that the growth of S. borealis complexly intertwined with diverse environmental factors and that due to the physiological integration of S. borealis, certain physiochemical properties do not unilaterally affect S. borealis' growth properties.

• Journal of Applied Biological Chemistry
• /
• 제52권4호
• /
• pp.187-194
• /
• 2009

참당귀 뿌리로부터 2종의 pyranocoumarin 성분을 분리하고 그들의 구조는 NMR 분석에 의해 각각 decursinol angelate(1), decursin(2)로 결정하였다. 이들 화합물에 대하여 hACAT 저해활성을 검정해본 결과, decursinol angelate(1)가 약한 저해활성을 나타낸 반면 decursin(2)은 hACAT1와 hACAT2에 대하여 $IC_{50}$ 값이 각각 137, $168\;{\mu}M$로서 우수한 저해활성을 나타내었다. 한편, 참당귀의 뿌리를 비롯한 꽃, 종자, 잎 등 여러부위에서 decursinol angelate(1), decursin(2)를 정량분석하였는데, 이때 LC/MS/MS(ESI, positive ion mode, MRM mode) 분석을 이용하였다. Decursinol angelate의 함량은 뿌리>잎>종자>꽃 순으로 높았으며, decursin의 함량은 뿌리>종자>꽃>잎 순으로 높게 측정되었다. 이상의 결과들은, 참당귀의 decursin이 동맥경화와 같은 심혈관 질환의 개선과 치료를 위해 유용하게 이용될 수 있음을 시사하였다. 또한 뿌리 이외에 그 동안 이용되지 않고 있던 참당귀 꽃, 잎과 같은 비상용부위에도 기능성물질인 decursin, decursinol angelate이 상당량 함유되어 있음이 구명되어 이러한 부위도 새로운 천연 기능성 소재로서 활용될 수 있음을 기대할 수 있었다.