• Journal of Biosystems Engineering
• /
• v.32 no.6
• /
• pp.395-402
• /
• 2007

This study was carried out as basic researches to develop the leaf vegetable harvester. This study was conducted to investigate physical and rheological properties of bundled leaf vegetables with stem (Chinese leek, Crown daisy and Chamnamul) as test materials held and picked-up by a machine. Stress-strain behavior, stress relaxation, and strain recovery for the bundled materials were analyzed using simple Maxwell model. Physical and rheological properties of the materials were investigated by measuring rupture load, deformation and stress experimentally. Also, strain recovery time when unloading was measured using super high speed camera. Recorded recovery time for stress-strain behavior was0.026 s for Chinese leek with liner strain recovery, 0.046 s for Crown daisy and 0.05 s for Chamnamul with non-linear strain recovery. Furthermore, the strain recovery time for permanent deformation was 0.026 s, 0.046 s, and 0.05 s for Chinese Leek, Crown daisy and Chamnamul, respectively. Finally, strain recovery time and strain recovery ratio for the test materials were 0.17 s, 60.4% in Chinese leek, 0.12 s, 55.3% in Crown daisy, 0.15 s, 58.7% in Chamnamul. Here strain recovery time means that how fast the test materials are recovered from initial deformation and strain recovery ratio means how much the test materials are recovered from initial deformation. The above results show that the test materials can be held enough and moved by the belts.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.36-42
• /
• 2010

In this study, the deformation and stress are analyzed through modal and harmonic response analysis at resonance on leaf spring. The displacement range of 7 to 14 mm is shown at natural frequencies as 6 kinds of resonance modes. The maximum deformation is shown as 8.8781mm at Mode 2. The maximum displacement and stress at leaf spring are shown as 0.0458 mm and 72.533 MPa respectively on 1200 Hz. The comfortability of passenger becomes better on leaf spring at suspension system by use of this design model.

• Structural Engineering and Mechanics
• /
• v.53 no.4
• /
• pp.781-790
• /
• 2015

We apply higher-order beam theory to analyze the deflections and stresses of a cantilevered single leaf flexure in bending. Our equations include shear deformation and the warping effect in bending. The results are compared with Euler-Bernoulli and Timoshenko beam theory, and are verified by finite element analysis (FEA). The results show that the higher-order beam theory is in a good agreement with the FEA results, with errors of less than 10%. These results indicate that the analysis of the deflections and stresses of a single leaf flexure should consider the shear and warping effects in bending to ensure high precision mechanism design.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.5
• /
• pp.1-10
• /
• 2015

This study proposes a method of developing authoring tool that can easily and intuitively generate diverse digital leaves that compose virtual landscape. The main system of the proposed authoring tool consists of deformation method for the contour of leaf blade based on image warping, procedural modeling of leaf vein and visualization method based on mathematical model that expresses the color and brightness of leaves. First, the proposed authoring tool receives leaf input image and searches for contour information on the leaf blades. It then designs leaf blade deformation method that can generate diverse shapes of leaf blades in an intuitive structure using feature-based image warping. Based on the computed leaf blade contour, the system implements the generalized procedural modeling method suitable for the authoring tool that generates natural vein patterns appropriate for the leaf blade shape. Finally, the system applies visualization function that can express color and brightness of leaves and their changes over time using a mathematical model based on convolution sums of divisor functions. This paper provides texture support function so that the digital leaves that were generated using the proposed authoring tool can be used in a variety of three-dimensional digital contents field.

• Tribology and Lubricants
• /
• v.17 no.2
• /
• pp.97-108
• /
• 2001

This paper describes the development of performance analysis technique for a leaf-type gas lubricated fail bearing. Stiffness coefficient and frictional damping due to the slip between all contacts of leaves are evaluated for various leaf structures. The fluid film thickness and pressure distribution are computed but it is not considered the elastic deformation by film pressure. The analysis results include the effects that the curvature radius and the length of leaf and the friction coefficient have on the static and dynamic characteristics of the foil bearings.

• Korean Journal Plant Pathology
• /
• v.10 no.3
• /
• pp.181-191
• /
• 1994

Occurrence of diseases in economic resource plants in Korea is poorly known. This paper reports short descriptions on symptom, occurrence condition, pathogen, and some phytopathological notes for each 10 fungal plant diseases new to Korea; leaf spot of Rosa multiflora with Seimatosporium discosioides causing leaf spot and defoliation, leaf blight of Equisetum arvense with Titaeospora equiseti causing leaf spot to leaf blight, leaf blight of Setaria viridis with Phyrenochaeta setariae causing leaf spot of Aster tataricus with Septoria astericola causing leaf spot and black spot, powdery mildew of Clematis fusca var. coreana with Erysiphe ranunculi causing powdery mildew and dwarfing, powder mildew of Ligularia stenocephala with Erysiphe galeopsidis causing powdery mildew and dwarfing, powdery mildew of Phlox subulata with Erysiphe cichoracearum causing powdery mildew and defoliation tar spot of Lonicera japonica with Rhytisma lonicericola causing tar spot and dwarfing, white rust of Pharbitis nil with Albugo ipomoeae-pandulatae causing white rust and deformation, and white rust of Achyranthes japonica with Albugo achyranthis causing white rust and defoliation.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.482-487
• /
• 2001

Leaf type foil bearings have been used successfully in many aerospace applications such as air cycle machines, turbocompressors and turboexpander. These applications are characterized by light loads, constant speeds and low to moderate temperatures. But, as system on start-up or shutdown, sliding contact between the shaft and foil surfaces cause wear. So, in present study, to understand pressure-flow characteristics and deformation of foil bearing, flow/structure interaction analysis was used. and using this method, 2D and 3D calculation was peformed for shape of foil bearing to know circumferential direction flow and leakage flow characteristics of axial direction.

• Journal of Plant Biology
• /
• v.39 no.3
• /
• pp.215-221
• /
• 1996

Sorghum leaf tissues showing the early acute response of systemic infection with maize dwarf mosaic virus (MDMV) strain A, contained unusual virus-induced cytological modifications including cell wall thickenings and protrusions, intercellular vesicles termed as "paramural bodies", modified plasmodesmata, abnormal plastids, and cylindrical inclusion bodies. Abnormal cell wall, some of which associated with paramural bodies, was frequently contained modified plasmodesmata. Various abnormal plastids were located within infected cells of leaf tissues showing the early acute response. The most important changes in chloroplast seen in the tissues are the presence of small vesicles, deformation of membranes, reduction in granal stack height, disappearance of osmiophilic globules and degeneration of stuctures. The cytological modification was not occurred in nucleus but a group of degenerated mitochondria with abnormal membranes attached to cylindrical inclusion bodies were observed. It was hard more or less to prove the relationship clearly between virus and cellular organelles in virus replication.plication.

• Journal of Digital Contents Society
• /
• v.16 no.2
• /
• pp.235-244
• /
• 2015

This study proposes a leaf modeling method that uses feature-based warping for efficient generation of various digital leaves. The proposed method uses warping method, one of image processing application techniques that can control various shapes of leaves in an easy, intuitive way, and generate natural patterns of veins efficiently. First, information on approximated contour is detected from a leaf blade image to identify the shape of a blade. Based on this, control line is automatically calculated to be used for feature-based warping. Then, control line-based warping is conducted to modify forms of leaf blade images in an intuitive way, automatically generating leaves of various shapes. And natural vein patterns are generated by applying a contour-based venation growth algorithm from contour information of the modified leaf blade images. This study performs experiments to verify whether various shape of leaves that comprise plants can be efficiently generated using a sample binary image of a blade. Also, we demonstrate that express the natural growth of leaves by applying warping to the growth of the leaf blade.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.155-159
• /
• 2020

In this study, the structural analyses were performed on the number of leaf springs in large truck. The deformations were small for all four models. The maximum stress of model A was found to be the largest, and that of model D was the smallest. Model A was seen about 1.87 times larger than model D and about 1.52 times larger than model B. The maximum stresses of models C and D were seen to be less. In terms of the effect to reinforce one more overlapping spring, The effect of the enhancement of the strength of model D was shown to be small by comparing with model C. Therefore, model C with three overlapping springs is thought to be efficient in design and good in strength. The structural strength of leaf spring can be evaluated by applying this study result to the leaf spring at large truck. And it is seen that the result can be the design of the leaf spring with durability at large truck and the aesthetic convergence.