• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.395-402
• /
• 2007

This study was carried out as basic researches to develop the leaf vegetable harvester. This study was conducted to investigate physical and rheological properties of bundled leaf vegetables with stem (Chinese leek, Crown daisy and Chamnamul) as test materials held and picked-up by a machine. Stress-strain behavior, stress relaxation, and strain recovery for the bundled materials were analyzed using simple Maxwell model. Physical and rheological properties of the materials were investigated by measuring rupture load, deformation and stress experimentally. Also, strain recovery time when unloading was measured using super high speed camera. Recorded recovery time for stress-strain behavior was0.026 s for Chinese leek with liner strain recovery, 0.046 s for Crown daisy and 0.05 s for Chamnamul with non-linear strain recovery. Furthermore, the strain recovery time for permanent deformation was 0.026 s, 0.046 s, and 0.05 s for Chinese Leek, Crown daisy and Chamnamul, respectively. Finally, strain recovery time and strain recovery ratio for the test materials were 0.17 s, 60.4% in Chinese leek, 0.12 s, 55.3% in Crown daisy, 0.15 s, 58.7% in Chamnamul. Here strain recovery time means that how fast the test materials are recovered from initial deformation and strain recovery ratio means how much the test materials are recovered from initial deformation. The above results show that the test materials can be held enough and moved by the belts.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.36-42
• /
• 2010

In this study, the deformation and stress are analyzed through modal and harmonic response analysis at resonance on leaf spring. The displacement range of 7 to 14 mm is shown at natural frequencies as 6 kinds of resonance modes. The maximum deformation is shown as 8.8781mm at Mode 2. The maximum displacement and stress at leaf spring are shown as 0.0458 mm and 72.533 MPa respectively on 1200 Hz. The comfortability of passenger becomes better on leaf spring at suspension system by use of this design model.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.781-790
• /
• 2015

We apply higher-order beam theory to analyze the deflections and stresses of a cantilevered single leaf flexure in bending. Our equations include shear deformation and the warping effect in bending. The results are compared with Euler-Bernoulli and Timoshenko beam theory, and are verified by finite element analysis (FEA). The results show that the higher-order beam theory is in a good agreement with the FEA results, with errors of less than 10%. These results indicate that the analysis of the deflections and stresses of a single leaf flexure should consider the shear and warping effects in bending to ensure high precision mechanism design.

• 한국컴퓨터그래픽스학회논문지
• /
• 제21권5호
• /
• pp.1-10
• /
• 2015

본 연구는 가상 조경을 구성하는 다양한 종류의 디지털 잎을 쉽고 직관적으로 제작할 수 있는 저작도구 개발방법을 제안한다. 제안하는 저작도구의 핵심 시스템은 영상 워핑기반의 잎몸 윤곽선 변형 방법, 잎맥의 절차적 모델링 그리고 잎의 색과 명암 등을 표현하기 위한 수리모델기반 시각화 방법으로 구성된다. 우선 잎 영상을 입력으로 받아 잎몸에 대한 윤곽선 정보를 찾고, 특징기반 영상 워핑을 활용하여 다양한 잎몸 형상을 직관적인 구조에서 쉽게 생성할 수 있는 잎몸 변형 방법을 설계한다. 그리고 계산된 잎몸 윤곽선을 기반으로 잎몸 형상에 적합한 자연스러운 잎맥 패턴을 생성하는 일반화된 절차적 모델링 방법을 저작도구에 맞게 구현한다. 마지막으로 약수 함수의 합성 기반의 수리모델을 활용하여 잎의 색, 명암 그리고 시간에 따른 변화를 표현할 수 있는 시각화 기능을 적용한다. 제안한 저작도구를 활용하여 제작된 디지털 잎이 다양한 3차원 디지털 콘텐츠 분야에 활용 가능하도록 텍스쳐 지원 기능을 제공한다.

• Tribology and Lubricants
• /
• 제17권2호
• /
• pp.97-108
• /
• 2001

This paper describes the development of performance analysis technique for a leaf-type gas lubricated fail bearing. Stiffness coefficient and frictional damping due to the slip between all contacts of leaves are evaluated for various leaf structures. The fluid film thickness and pressure distribution are computed but it is not considered the elastic deformation by film pressure. The analysis results include the effects that the curvature radius and the length of leaf and the friction coefficient have on the static and dynamic characteristics of the foil bearings.

• 한국식물병리학회지
• /
• 제10권3호
• /
• pp.181-191
• /
• 1994

Occurrence of diseases in economic resource plants in Korea is poorly known. This paper reports short descriptions on symptom, occurrence condition, pathogen, and some phytopathological notes for each 10 fungal plant diseases new to Korea; leaf spot of Rosa multiflora with Seimatosporium discosioides causing leaf spot and defoliation, leaf blight of Equisetum arvense with Titaeospora equiseti causing leaf spot to leaf blight, leaf blight of Setaria viridis with Phyrenochaeta setariae causing leaf spot of Aster tataricus with Septoria astericola causing leaf spot and black spot, powdery mildew of Clematis fusca var. coreana with Erysiphe ranunculi causing powdery mildew and dwarfing, powder mildew of Ligularia stenocephala with Erysiphe galeopsidis causing powdery mildew and dwarfing, powdery mildew of Phlox subulata with Erysiphe cichoracearum causing powdery mildew and defoliation tar spot of Lonicera japonica with Rhytisma lonicericola causing tar spot and dwarfing, white rust of Pharbitis nil with Albugo ipomoeae-pandulatae causing white rust and deformation, and white rust of Achyranthes japonica with Albugo achyranthis causing white rust and defoliation.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.482-487
• /
• 2001

Leaf type foil bearings have been used successfully in many aerospace applications such as air cycle machines, turbocompressors and turboexpander. These applications are characterized by light loads, constant speeds and low to moderate temperatures. But, as system on start-up or shutdown, sliding contact between the shaft and foil surfaces cause wear. So, in present study, to understand pressure-flow characteristics and deformation of foil bearing, flow/structure interaction analysis was used. and using this method, 2D and 3D calculation was peformed for shape of foil bearing to know circumferential direction flow and leakage flow characteristics of axial direction.

• Journal of Plant Biology
• /
• 제39권3호
• /
• pp.215-221
• /
• 1996

Sorghum leaf tissues showing the early acute response of systemic infection with maize dwarf mosaic virus (MDMV) strain A, contained unusual virus-induced cytological modifications including cell wall thickenings and protrusions, intercellular vesicles termed as "paramural bodies", modified plasmodesmata, abnormal plastids, and cylindrical inclusion bodies. Abnormal cell wall, some of which associated with paramural bodies, was frequently contained modified plasmodesmata. Various abnormal plastids were located within infected cells of leaf tissues showing the early acute response. The most important changes in chloroplast seen in the tissues are the presence of small vesicles, deformation of membranes, reduction in granal stack height, disappearance of osmiophilic globules and degeneration of stuctures. The cytological modification was not occurred in nucleus but a group of degenerated mitochondria with abnormal membranes attached to cylindrical inclusion bodies were observed. It was hard more or less to prove the relationship clearly between virus and cellular organelles in virus replication.plication.

• 디지털콘텐츠학회 논문지
• /
• 제16권2호
• /
• pp.235-244
• /
• 2015

본 논문에서는 다양한 디지털 잎을 효율적으로 생성하기 위하여 특징기반 워핑을 활용한 잎 모델링 방법을 제시한다. 제안하는 방법은 다수의 다양한 잎의 형상을 쉽고 직관적으로 제어하고 이를 통해 자연스러운 잎맥 패턴을 효과적으로 성장할 수 있도록 영상처리 응용 기술 중 하나인 워핑 방법을 활용한다. 먼저 잎몸 영상으로부터 잎몸의 형상을 판단할 수 있는 근사화된 컨투어 정보를 찾고, 이를 기반으로 특징기반 워핑에 사용되는 제어선을 자동으로 계산한다. 다음으로 제어선기반 워핑을 통해 잎몸 영상을 직관적으로 변형함으로써 다양한 형상을 갖는 잎을 자동으로 생성할 수 있다. 그리고 변형된 잎몸 영상의 컨투어 정보들로부터 컨투어기반 잎맥 성장 알고리즘을 적용하여 자연스러운 잎맥 패턴을 생성한다. 본 논문에서는 잎몸에 해당하는 샘플 이진영상 한 장을 사용하여 식물을 구성하는 다양한 형상의 잎을 효율적으로 생성 가능한지 여부를 실험을 통해 입증한다. 또한 워핑을 잎몸의 성장에 적용하여 잎의 자연스러운 성장을 표현할 수 있음을 확인한다.

• 한국융합학회논문지
• /
• 제11권12호
• /
• pp.155-159
• /
• 2020

본 연구에서는 대형트럭의 판스프링의 개수에 대한 구조 해석을 수행하였다. 변형량은 4가지 모델들이 공히 작게 나왔다. Model A의 응력이 가장 큰 것으로 나타났고 Model D의 응력이 가장 작은 것으로 나타났다. Model A의 최대 응력이 Model D에 비하여 약 1.87배로 크게 나왔고 Model B에 비하여 약 1.52배 정도로 크게 나타났다. Model C와 Model D의 최대응력은 적게 나왔다. Model D가 Model C에 비하여 겹판 스프링을 한 개 더 보강한 효과로 보면 그 강도의 향상의 효과는 작게 나타났다. 따라서 겹판 스프링 3개인 Model C가 설계상 효율적이고 강도면에서도 좋다고 사료된다. 본 연구 결과를 대형트럭에서의 판스프링에 적용함으로서 판스프링의 구조 강도를 평가할 수 있고 그리고 그 결과가 대형트럭에서의 내구성이 있는 판스프링의 설계와 미적인 융합이 될 수 있다고 보인다.