• 제목/요약/키워드: Leading Pattern Group

검색결과 34건 처리시간 0.026초

Comprehensive review of membranoproliferative glomerulonephritis: spotlighting the latest advances in revised classification and treatment

  • Jeong Yeon Kim
    • Childhood Kidney Diseases
    • /
    • 제27권2호
    • /
    • pp.64-69
    • /
    • 2023
  • Membranoproliferative glomerulonephritis (MPGN) is a complex group of renal diseases characterized by a specific pattern of glomerular injury that includes thickening of the capillary wall and mesangial expansion, leading to a heterogeneous group of conditions. This review article offers a comprehensive overview of MPGN, its new classification, pathophysiology, diagnostic evaluation, and management options.

대기전력 차단시점 발견을 위한 모델링과 그룹생성 알고리즘 구현 (Modeling for Discovery the Cutoff Point in Standby Power and Implementation of Group Formation Algorithm)

  • 박태진;김수도;박만곤
    • 한국멀티미디어학회논문지
    • /
    • 제12권1호
    • /
    • pp.107-121
    • /
    • 2009
  • 대기전력(Standby power) 소모가 발생하는 첫 번째 요인은 전원에서 IC로 들어오면서 거쳐야하는 기동전압 때문이며 나머지 하나는 IC가 동작할 때의 전류 때문이다. 본 논문에서는 대기전력 상태와 차단 시점의 패턴분석을 통해서 자동 On/Off할 수 있도록 하는 간단한 모듈장치 구성과 알고리즘 적용에 목적을 두었다. 이를 위해서 전력 신호분석과 모델링에 근간을 두었으며 대기전력 절감을 위해서 On/Off 차단기준을 마련했다. On/Off 차단 시점을 찾기 위해서 $1^{st}$ SCS와 $2^{nd}$ SCS의 차분값(subtraction value), 그리고 콘센트로부터 유입된 초당 샘플링 계수에 대한 중간값(median value)을 중요한 파라미터로써 정의한 다음 대기전력 상태에서의 유사그룹 및 유력패턴 그룹 생성 알고리즘을 수행했다.

  • PDF

보건소 노인 영양 개선 사업 : 영양밀도와 섭취 식품군의 다양성에 의한 노인 영양 평가 (Elderly Nutrition Improvement Program in the community health center : Nutritional evaluation of the elderly using the Index of Nutritional Quality and food group intake pattern)

  • 임경숙
    • 대한영양사협회학술지
    • /
    • 제3권2호
    • /
    • pp.182-196
    • /
    • 1997
  • Physiological changes that affect nutrient absorption and utilization occur in older adults, and the collection of nutritional information is an important part of examining the nutrition and health issue. A nutritional survey using the 24-hour recall method was performed to identify nutritional quality and leading patterns of food group intake for protein, vitamin C, P and Fe were over 1, whereas those for vitamin A, $B_1$, $B_2$, niacin and Ca were below 1. The MAR(Mean Adequacy Ratio) was relatively low(0.75). The percentage of energy from carbohydrate, protein, and fat was 65.1, 15.6, and 19.5, respectively, thus the quantities of energy source were ideal. The Older subjects revealed poorer nutrition quality than the younger subjects did. The food group intake pattern of the elderly was not diverse, only 9% of them consumed all food groups in a day. These results suggest that nutritional guidelines for older Koreans should focus on the maintenance of adequate energy intake. In addition, selection of foods with high protein and calcium, such as dairy food, should be emphasized, particularly in the older elderly. Nutrition programs should target individuals at risk of not receiving enough nutrients, like the oldest elderly, and persons with lower education.

  • PDF

중앙형 추간판탈출증의 진단에서 체열촬영의 의의 (A Study on the Infrared Thermographic Imaging in Diagnosis of the Central Type of Herniated Disc)

  • 송봉근;이종덕;박용현;송운용;김중길
    • Journal of Acupuncture Research
    • /
    • 제15권2호
    • /
    • pp.301-310
    • /
    • 1998
  • Infrared thermographic imaging visualizes noninvasively various abnormal condition by detecting the skin temperature. As the imaging represents the objective condition by the changes in blood flow under the control of autonomic nervous system, it is used to diagnosis and monitor the lumboscral radiculopathy. And asymmetry is important in the diagnosis of disc herniation. The most common type of disc herniation occurs psoterolaterally. This frequently causes nerve root compression leading to a radiculopathy in the distribution of the involved nerve root, most of which also provoke the asymmetric changes in thermography. Central disc herniation, which accounts for 5% to 35% of disc herniation, is typically associated with low back pain. But radiculopathy is usually abscent unless central disc heriniaton is large enough to cause compression of the cauda equina. To evalute the diagnostic value of the thermographic imaging in the diagnosis of central disc herniation, the imaging of 15 normal subjects and 48 patients with central disc herniation documented by CT scan were analyzed. The patients had either bilateral radiculophathy or no radiculopathy. The imaging of patient group with non rediculopathy did not show any significant thermal difference to control. While bilateral radiculopathy group reveled hypothermic pattern compared twith control. Thermal difference between left and right side did not present any significance in non radiculopathy group but hypothermia in bilateral radiculopathy group. Large herniation group demonstrated hyperthemic pattern while the others showed no significant change. Cranial caudal thermal difference did not show any difference between experiment groups. These results shows that infrared thermographic imaging can be used central disc herniation with bilateral radiculopathy, while it seems to little useful on the diagnosis of non radiculopathic disc herniation.

  • PDF

재일한국인의 생활문화의 이질화와 적응과정에 관한 보건학적 연구(제 1보 한국, 재일한국인, 일본의 사인구조분석 (A comparative Study of Changing Pattern of Cause of Death Analysis of Korean, Korean in Japan and Japanese)

  • 김정근;장창곡;임달오;김무채;이주열
    • 한국인구학
    • /
    • 제15권2호
    • /
    • pp.15-59
    • /
    • 1992
  • After world war II Japanese life expectancy has been improved remarkably, and reached the highest level in the world around late 1970's. The life expectancy of Korean has also shown tremendous improvement in recent years with about 20 year's gap from the Japanese. The reason of rapid improvement of life expectancy can be explained by changes in the structure of cause of death due to health system, living standard, social welfare, health behavior of individuals and so on. Korean in Japan is placed under different situations from both Korean in Korea and Japanese in these regards, and expected to show different picture of cause of death pattern. The objective of this study is the comparision of changing patterns of cause of death of three population groups, Korean in Japan, Korean in Korea and Japanese, and to investigate the reasons which effect to the structural difference of mortality cause with special emphasis on health ecological aspects. One of the major limitations of the Korean causes of death statistics is the under-registration which ranges about 10% of the total events, and inaccuracy of the exact cause of death. Some 20% of registered deaths were unable to classify by ICD. However, it is concluded that the Korean data are evaluated as sufficient to stand for over-viewing of trends of cause of death pattern. The evaluation is done by comparing data from registration and field survey over the same population sample. Population data of Korean in Japan differ between two sources of data; census and foreigner's registration. Correction is done by life table method under the assumption that age-specific mortality pattern would accord with that of the Japanese. The crude death rate was lowest among Korean in Japan, 5.7 deaths per 1,000 population in 1965. The crude death rates of Korean in Japan and Japanese are increasing recently influenced by age structure while Korean in Korea still shows decreasing tendency. The adjusted death rate is lowest among Japanese, followed by Korean in Japan, and Korean in Korea. The leading causes of death of Korean in Korea until 1960's was infectious diseases including pneumonia and tuberculosis. The causes of death structure changed gradually to accidents, neoplasm, hypertensive disease, cerebro-vascular disease in order. The main difference in cause of death between Korean and Japanese if high rate of liver diseases and diabetes for both Korean in Japan and Korea. A special feature of cause of death among Korean in Korea is remakably high rate of hypertensive disease, which is assumed to be caused by physicians tendency in choosing diagnostic categories. The low ischemic heart disease and high vasculo-cerebral disease are the distinctive characteristic of the three population groups compared to western countries. Specific causes of death were selected for detailed sex, age and ethnic group comparisons based on their high death rates. Cancer is the cause of death which showed most dramatical increase in all three population groups. In Korea 20.1% of all death were caused by cancer in 1990 compared with 10.5% in 1981. Cancer of the liver is the leading cause of cancer death among Korean in Japan for both sexes, followed by cancer of the lung and cancer of the stomach, while that of Korean in Korea is cancer of the stomach, followed by cancer of the liver and cancer of the lung for male. Causes of infant mortality were examined among the three population groups since 1980 on yearly bases. For both Japanese and Korean in Japan, leading cause of death ranks as conditions originating in the perinatal period, congenital anomalies, accidents and other violent causes. Trends since 1980 for these two population groups in the leading cause of infant mortality showed no changes. On the contrary, significant changes in leading cause of death structure in Korea were observed : the ranking of leading cause of death in 1981 were congenital asnomalies, pneumonia bronchitis, infectious disease, heart disease, conditions originating in the perinatal period, accident and other violent causes ; in 1990 the ranking shifted to congenital anomalies, accident, pneumonia bronchities, conditions originating in the perinatal period, infectious disease. The mortality rate by congenital anomalies in Korea continuously grew than any other causes. Larger increase ocurred during the 1990's

  • PDF

RFID TAG 미세패턴 성형을 위한 공구혼 진동해석 (Modal Analysis of an Ultrasonic Tool Horn for RFID TAG Micro-pattern Forming)

  • 김강은;이봉구;최성주
    • 한국산학기술학회논문지
    • /
    • 제17권12호
    • /
    • pp.652-658
    • /
    • 2016
  • 본 논문에서는 유한 요소법(FEM) 시뮬레이션을 사용하여 초음파 미세패턴 성형에 사용되는 초음파 공구혼을 이론적 연구와 유한요소해석을 통하여 조사 하였다. 이 방법은 FEM 해석으로 얻어진 초기 설계 추정치에 기초한다. 초음파 미세패턴 성형에 필요한 고유주파수와 공구 혼의 공진주파수를 유한요소해석을 통하여 예측하였다. ANSYS S/W를 이용한 FEM 분석은 초음파 혼의 진동모드 형상의 최적 설계기술로 공진 주파수를 예측하기 위해 사용하였다. 초음파 진동자에 전원이 공급되면, 초음파 진동자에 공급된 전기에너지가 기계적인 운동에너지로 변환되어 진동이 발생하게 된다. 초음파 공구혼의 종진동 에너지를 이용하여 절연시트위에 RFID TAG 패턴 성형을 하게 된다. 초음파 진동을 이용한 마이크로 단위의 형상정밀도 향상을 위해서는 공구혼의 종진동모드만을 이용하여 성형 해야 한다. 본 연구에서는 초음파 마이크로패턴 성형에 필요한 공구혼의 고유진동수 및 진동모드를 갖는 설계변수를 고찰하고, 유한요소해석 결과를 바탕으로 공구혼을 제작함으로써 마이크로패턴 성형에 응용하고자 한다. 유한요소해석 결과를 바탕으로 RFID TAG의 미세패턴 성형을 위한 초음파 공구혼의 최적설계 및 제작에 반영하였다.

He-Cd 레이저와 근접장현미경을 이용한 폴리머박막 나노리소그라피 공정의 특성분석 (Characteristics of nanolithograpy process on polymer thin-film using near-field scanning optical microscope with a He-Cd laser)

  • 권상진;김필규;천채민;김동유;장원석;정성호
    • 한국레이저가공학회지
    • /
    • 제7권3호
    • /
    • pp.37-46
    • /
    • 2004
  • The shape and size variations of the nanopatterns produced on a polymer film using a near-field scanning optical microscope(NSOM) are investigated with respect to the process variables. A cantilever type nanoprobe having a 100nm aperture at the apex of the pyramidal tip is used with the NSOM and a He-Cd laser at a wavelength of 442nm as the illumination source. Patterning characteristics are examined for different laser beam power at the entrance side of the aperture($P_{in}$), scan speed of the piezo stage(V), repeated scanning over the same pattern, and operation modes of the NSOM(DC and AC modes). The pattern size remained almost the same for equal linear energy density. Pattern size decreased for lower laser beam power and greater scan speed, leading to a minimum pattern width of around 50nm at $P_{in}=1.2{\mu}W\;and\;V=12{\mu}m/s$. Direct writing of an arbitrary pattern with a line width of about 150nm was demonstrated to verify the feasibility of this technique for nanomask fabrication. Application on high-density data storage is discussed.

  • PDF

Interference effects in a group of tall buildings closely arranged in an L- or T-shaped pattern

  • Zhao, J.G.;Lam, K.M.
    • Wind and Structures
    • /
    • 제11권1호
    • /
    • pp.1-18
    • /
    • 2008
  • Interference effects in five square tall buildings arranged in an L- or T-shaped pattern are investigated in the wind tunnel. Mean and fluctuating shear forces, overturning moments and torsional moment are measured on each building with a force balance mounted at its base. Results are obtained at two values of clear separation between adjacent buildings, at half and a quarter building breadth. It is found that strong interference effect exists on all member buildings, resulting in significant modifications of wind loads as compared with the isolated single building case. Sheltering effect is observed on wind loads acting along the direction of an arm of the "L" or "T" on the inner buildings. However, increase in these wind loads from the isolated single building case is found on the most upwind edge building in the arm when wind blows at a slight oblique angle to the arm. The corner formed by two arms of buildings results in some wind catchment effect leading to increased wind pressure on windward building faces. Interesting interference phenomena such as negative drag force are reported. Interference effects on wind load fluctuations, load spectra and dynamic building responses are also studied and discussed.

A Novel High Performance Scan Architecture with Dmuxed Scan Flip-Flop (DSF) for Low Shift Power Scan Testing

  • Kim, Jung-Tae;Kim, In-Soo;Lee, Keon-Ho;Kim, Yong-Hyun;Baek, Chul-Ki;Lee, Kyu-Taek;Min, Hyoung-Bok
    • Journal of Electrical Engineering and Technology
    • /
    • 제4권4호
    • /
    • pp.559-565
    • /
    • 2009
  • Power dissipation during scan testing is becoming an important concern as design sizes and gate densities increase. The high switching activity of combinational circuits is an unnecessary operation in scan shift mode. In this paper, we present a novel architecture to reduce test power dissipation in combinational logic by blocking signal transitions at the logic inputs during scan shifting. We propose a unique architecture that uses dmuxed scan flip-flop (DSF) and transmission gate as an alternative to muxed scan flip-flop. The proposed method does not have problems with auto test pattern generation (ATPG) techniques such as test application time and computational complexity. Moreover, our elegant method improves performance degradation and large overhead in terms of area with blocking logic techniques. Experimental results on ITC99 benchmarks show that the proposed architecture can achieve an average improvement of 30.31% in switching activity compared to conventional scan methods. Additionally, the results of simulation with DSF indicate that the powerdelay product (PDP) and area overhead are improved by 28.9% and 15.6%, respectively, compared to existing blocking logic method.

The Sliding Window Gene-Shaving Algorithm for Microarray Data Analysis

  • 이혜선;최대우;전치혁
    • 한국생물정보학회:학술대회논문집
    • /
    • 한국생물정보시스템생물학회 2002년도 제1차워크샵
    • /
    • pp.139-152
    • /
    • 2002
  • Gene-shaving(Hastie et al, 2000) is a very useful method to identify a meaningful group of genes when the variation of expression is large. By shaving off the low-correlated genes with the leading principal component, the primary genes with the coherent expression pattern can be identified. Gene-shaving method works well If expression levels are varied enough, but it may not catch the meaningful cluster in low expression level or different expression time even with coherent patterns. The sliding window gene-shaving method which is to apply gene-shaving in each sliding window after hierarchical clustering is to compensate losing a meaningful set of genes whose variation is not large but distinct. The performance to identify expression patterns is compared for the simulated profile data by the different variance and expression level.

  • PDF