• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.113-119
• /
• 2012

This paper describes the design and control of a phase shift full bridge converter with a current doubler, which can be used for the on-board charger for the lead-acid battery of electric forklifts. Unlike the common resistance load, the battery has a large capacitance element and it absorbs the entire converter output ripple current, thereby shortening the battery life and degrading the system efficiency. In this paper a phase shift full bridge converter with a current doubler has been adopted to decrease the output ripple current and the transformer rating of the charger. The charge controller is designed by using the small signal model of the converter, taking into consideration the internal impedance of the battery. The stability and performance of the battery charger is then verified by constant current (CC) and constant voltage (CV) charge experiments using a lead-acid battery bank for an electric forklift.

• International Journal of Internet, Broadcasting and Communication
• /
• 제4권1호
• /
• pp.8-12
• /
• 2012

The purpose of this study is to review the possible effect of the learning paradigm shift from traditional method to ubiquitous learning. What are the societal issues that need to be address in order to design a new pedagogical platform trending from e-learning to m-learning and now the u-learning? That without the proper study of how learning environment may affect the learning process of an individual will lead to poor quality of education. This new era of learning environment offer a big opportunity for "anytime, anywhere" learning. Thus, Lifelong learning is at hand of everyone. Maximizing the benefit of new trend will be a great help and addressing the limitations will lead to quality education.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권1호
• /
• pp.36-41
• /
• 2004

The blanking of thin sheet metal using progressive dies is an important process on production of precision electronic machine parts such as IC leadframe. This paper summarizes the results of simulating the progressive blanking process by means of LS/DYNA. In order to verify the influence of blanking order on the final lead profile and deformed configuration, simulation technique has been proposed and analyzed using a commercial FEM code, LS/DYNA. The results of FE-simulations are in good agreement with the experimental result. After then, to construct rule base in progressive blanking process, FE-simulation has been performed using a simple model. Based on this result rule base is set up and then the blanking order of inner lead is rearranged. Consequently, from the results of FE-simulation using suggested method in this paper, it is possible to predict the shift of lead to manufacture high precision lead frame in progressive blanking process. The proposed method can give more systematic and economically feasible means for designing progressive blanking process.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2021년도 제64차 하계학술대회논문집 29권2호
• /
• pp.691-694
• /
• 2021

The malalignment of the trunk causes abnormal stress in a specific area and lead to trunk instability. The purpose of this study was to investigate the correlation between the angle between the infrasternal angle and the trunk side shift distance. The participants in this study 22 subjects were participated. The infrasternal angle and trunk side shift distance were measured using a camera and analyzed using the Image J program. The correlation between the asymmetry of the infrasternal angle and trunk side shift distance was moderate (r=-0.413; p=0.028). According to the asymmetry of the infrasternal angle, it was confirmed that trunk lateral shift appeared in a specific direction. Based on result, it suggests that infrasternal angle and trunk side shift should be considered in the intervention plan of patients with asymmetry of the infrasternal angle.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권7호
• /
• pp.458-461
• /
• 2005

Power dissipated during test application is substantially higher than power dissipated during functional operation which can decrease the reliability and lead to yield loss. This paper presents a new technique for power minimization during test application in full scan sequential circuits. This paper shows freezing of combinational logic parts during scan shift operation in test mode. The freezing technique leads to power to minimization. Significant power reduction in the scan techniques is achieved on ISCAS 89 benchmarks.

• Bulletin of the Korean Chemical Society
• /
• 제6권2호
• /
• pp.63-67
• /
• 1985

The NMR chemical shift arising from 3d electron spin dipolar nuclear spin angular momentum interactions for a 3d$^2$ system in a strong crystal field environment of octahedral symmetry has been investigated when the fourfold axis is chosen to be our axis of quantization. The NMR shift is separated into the contribution of 1/R$^5$ and 1/R$^7$ terms. A comparision of the multipolar terms with nonmultipolar results shows that the 1/R$^5$ term contributes dominantly to the NMR shift and there is in good agreement between the exact solution and the multipolar results when R ${\ge}$ 0.25. A temperature dependence analysis may lead to the results that the 1/T$^2$ term has the dominant contribution to the NMR shift for a paramagnetic 3d$^2$ system but the contribution of the 1/T term may not be negligible.

• 한국산업보건학회지
• /
• 제33권2호
• /
• pp.206-214
• /
• 2023

Objectives: To determine the effect of the various type and number of shift work on sociopsychological stress in the university hospital nurses in Seoul, South Korea. Methods: Data was collected through a self-administered questionnaire that included general characteristics, the type and number of shift work in the past 4 weeks and the an sociopsychological stress based on PWI-SF. Logistic regression analysis was conducted to analyze the effect of shift work by types on sociopsychological stress of university hospital nurses using SAS 9.4 and it adjusted general characteristics by the additional models. Results: When the number of night shift work 3 or 4 compared to 0, sociopsychological stress was significantly high(OR=2.16, 95% CI=1.29-3.65). When 5 or more, it was higher(OR=2.39, 95% CI=1.55-3.72). Two continuous night shift work compared to 0 increased sociopsychological stress(OR=2.37, 95% CI=1.49-3.81) and 3 or more even more(OR=2.70, 95% CI=1.72-4.27). If the shift work type changes 14 or 15 times compare to below 11, sociopsychological stress is increased and even higher when 15 or more times but it's not significant after adjusting for covariates. Conclusions: It suggests that workplace with nurse expose to shift work should be on lookout for more than three night shift work, more than two continuous night shift work and more than 14 shift work change which can lead to burnout, absenteeism, depression and decreased productivity.

• Steel and Composite Structures
• /
• 제5권2_3호
• /
• pp.235-246
• /
• 2005

Local buckling is a major consideration in the design of thin-walled cold-formed steel sections. The main effect of local buckling in plate elements under longitudinal compressive stresses is to cause a redistribution of the stresses in which the greatest portion of the load is carried near the supporting edges of the plate junctions. The redistribution produces increased stresses near the plate junctions and high bending stresses as a result of plate flexure, leading to ultimate loads below the squash load of the section. In singly symmetric cross-sections, the redistribution of longitudinal stress caused by local buckling also produces a shift of the line of action of internal force (shift of effective centroid). The fundamentally different effects of local buckling on the behaviour of pin-ended and fixed-ended singly symmetric columns lead to inconsistencies in traditional design approaches. The paper describes local buckling and shift of effective centroid of thin-walled cold-formed steel channel columns. Tests of channel columns have been described. The experimental local buckling loads were compared with the theoretical local buckling loads obtained using an elastic finite strip buckling analysis. The shift of the effective centroid was also compared with the shift predicted using the Australian/New Zealand and American specifications for cold-formed steel structures.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.712-717
• /
• 2007

This study deals with the TE(Transmission Error) of gear tooth profile by modifying a profile and lead of a surface of tooth. First, we experimentally confirmed that the TE is a synthesis of the sliding velocity between both gears. Since various types of TE appear in the experiments, we introduced definition of transmission error and the optimism design by modifying a surface parameters. The test stand's performance is then evaluated through a series of multiple torque transmission error tests. Comparisons are made between data recorded before and after the test stand's redesign, and subsequently repeatability studies are performed to verify the veracity of the measured data. Finally, the experimental results are compared to the analytical predictions of two different gear analysis programs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.97-98
• /
• 2006

This study deals with the Transmission Error of gear tooth profile by modifying a Profile and lead of a surface of Tooth. First, we experimentally confirmed that the Transmission Error is a synthesis of the sliding Velocity between both gears. Since various types of Transmission errors appear in the experiments, we introduced definition of Transmission Error and The Optimism Design by modifying a surface parameters The test stand's performance is then evaluated through a series of multiple torque transmission error tests. Comparisons are made between data recorded before and after the test stand's redesign, and subsequently repeatability studies are performed to verify the veracity of the measured data. Finally, the experimental results are compared to the analytical predictions of two different gear analysis programs.