• Structural Engineering and Mechanics
• /
• v.5 no.5
• /
• pp.529-539
• /
• 1997

This paper deals with the bending problem of a variable-are-length elastica under moment gradient. The variable are-length arises from the fact that one end of the elastica is hinged while the other end portion is allowed to slide on a frictionless support that is fixed at a given horizontal distance from the hinged end. Based on the elastica theory, exact closed-form solution in the form of elliptic integrals are derived. The bending results show that there exists a maximum or a critical moment for given moment gradient parameters; whereby if the applied moment is less than this critical value, two equilibrium configurations are possible. One of them is stable while the other is unstable because a small disturbance will lead to beam motion.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1129-1133
• /
• 2001

An upper bound elemental technique(UBET) has been carried out to predict the forming load, the deformation pattern and the extruded length of the lateral extrusion of a spider for the automotive universal joint. For the upper bound analysis, a kinematically admissible velocity field(KAVF) is proposed. From the proposed velocity field, the upper bound load, the deformation pattern and the average length of the extruded billets are determined by minimizing the total energy consumption rate which is a function of unknown velocities at each element. Experiments are carried out with antimony-lead billets at room temperature using the rectangular shaped punch. The theoretical prediction of the forming load, the deformation pattern and the extruded length are good in agreement with the experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.1
• /
• pp.154-161
• /
• 2001

A UBET analysis has been carried out to predict the forming load and the extruded length of forward and backward extrusion of hexagonal and trochoidal wrench colts. For the upper bound load and the average length of the extruded billets are determined by minimizing the total energy consumption rate which is a function of unknown velocities and parameters at each element. Experiments are carried out with antimony-lead billets at room temperature using hexagonal and trochoidal shaped punches. The theoretical predictions of the forming load and the extruded length are in good agreement with the experimetal results.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.96-103
• /
• 1999

A kinematically admissible velocity field is derived to analyze the forming load and the extruded length in the extrusion/forging process of trochoidally headed bars from round billets. The forming load and the extruded length are obtained by minimizing the total energy-consumption rate. Experiments are carried out with lead billets at room temperature using trochoidally shaped punches. The theoretical predictions of forming load and extruded length are in good agreement with the experimental results.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.31-34
• /
• 2002

In this study, thermal analysis of a thermal capacitor, which is used to cool the current lead in conduction-cooled superconducting systems, was done. The temperature difference across a thermal capacitor was calculated by using heat conduction equation. Effect of heat load, total thickness, height and length of a thermal capacitor on the temperature difference were show. Using the results in this work, total thickness and heat height of a thermal capacitor can be determined for given heat load and given temperature difference. This work can be used practically in design for every superconduction system using a current lead.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.5
• /
• pp.826-841
• /
• 1995

This study is concerned with the functional utility of movement in sleeve from an ergonomic viewpoint. Experiments were carried out which include 43 upper extremity segments, 21 motions and 35 female subjects. The major conclusions of the study are. 1. The expansion rate of upper extremity was higher in length than in circumference mesurements. The amounts of expansion were, especially high (more than 60mm) for inner arm length, axillary arm circumference, and outer arm length. Therefore, a lot of ease is necessary for these parts. On the other hand, armhole circumference, forearm circumference, and wrist circumference had low rates of expansion. The sleeve cap length was also contracted in all motions. 2. The expansion rate and the range of expansion and contraction were higher in the upper arm than in the forearm. The main points of expansion were the axillary and elbow parts. The segment of maximum expansi (rate of 44.8%) was Iii of axillary parts. As the body surface expands mainly in some segments, it is desirable to allow ease to the main segments of expansion. 3. In a basic sleeve, necessary ease was lacking in the measurements for outer arm length and axillary arm circumference, while it was too large in armhole circumference, forearm circumference, wrist circumference, and sleeve cap length. Therefore, a basic sleeve is inadequate as a functional sleeve for hard work in point of functional utility of movement. Wider application of these findings would lead to an improvement in the comfort of workers.

• Journal of the Korean Society of Combustion
• /
• v.21 no.2
• /
• pp.29-37
• /
• 2016

This study described the experimental investigations of combustion instability in a model gas turbine combustor. Strong coupling between pressure oscillations and unsteady heat release excites a self-sustained acoustic wave, which results in a loud and annoyed sound, and may also lead to a structural damage to the combustion system. In this study, in order to examine the combustion instability phenomenon of a dual swirling combustor configuration, the information of heat release and pressure fluctuation period with respect to the variation in both thermal power and combustor length was collected experimentally. As a result, the fundamental acoustic frequency turned out to increase with the increasing thermal power without respect to the combustor length. The frequency response to the combustor length was found to have two distinct regimes. In a higher power regime the frequency significantly decreases with the combustor length, as it is expected from the resonance of gas column. However, in a lower power regime it is almost insensitive to the combustor length. This insensitive response might be a result of the beating phenomenon between the interacting pilot and main flames with different periods.

• Journal of Nutrition and Health
• /
• v.20 no.4
• /
• pp.225-236
• /
• 1987

This study was performed to investigate the effects of lead poisoning and different levels of dietary lipid on lead and lipid metabolism in the rats. Forty eight male weanling rats of Sprague-Dawley strain weighing 73.1$\pm$11.1g were blocked into 6 groups according to body weight. Dietary lipid were given at the lev딘 of 5, 20 and 40% of total caloric intake and lead were either administered or not. The results obtained are summerized as follows ; 1) Food intake, weight gain, F.E.R. liver and epididymal. fat pad weights, weight and length of bone, hematocrit and hemoglobin content in Pb-adminstered groups were lower than these in Pb-free groups. 2) Plasma lipid and cholesterol levels were tended to be higher in Pb-administered groups than in Pb-free groups, while liver lipid and cholesterol levels were tended to be lower in Pb-adminstered groups. 3) Fecal dry matter excretion was tended to be higher in Pb-adminstered groups than in Pb-free groups, and were increased with increasing dietary lipid level. Daily fecal excretions of lipid and cholesterol were higher in high lipid groups than in low lipid groups and these levels were even higher in the animals exposed to Pb than in Pb-free groups. 4) Pb contents in blood, liver, kidney and bone were significantly higher in Pb administered groups than in Pb-free groups. Pb levels of blood, liver and bone did not show any significant difference among groups with different levels of dietary lipid, but Pb concentration in kidney of Pb-adminstered groups increased with increasing dietary lipid level.

• Molecules and Cells
• /
• v.42 no.10
• /
• pp.729-738
• /
• 2019

Autophagy is an important process for protein recycling. Oligomerization of p62/SQSTM1 is an essential step in this process and is achieved in two steps. Phox and Bem1p (PB1) domains can oligomerize through both basic and acidic surfaces in each molecule. The ZZ-type zinc finger (ZZ) domain binds to target proteins and promotes higher-oligomerization of p62. This mechanism is an important step in routing target proteins to the autophagosome. Here, we determined the crystal structure of the PB1 homo-dimer and modeled the p62 PB1 oligomers. These oligomer models were represented by a cylindrical helix and were compared with the previously determined electron microscopic map of a PB1 oligomer. To accurately compare, we mathematically calculated the lead length and radius of the helical oligomers. Our PB1 oligomer model fits the electron microscopy map and is both bendable and stretchable as a flexible helical filament.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.515-522
• /
• 1991

Determining the motion using optimal technique about traveling time and trajectory planning has been studied often in recent years, but the study of determining the optimal robot dimensions is rare, the authors attempt to find out the least driving torques and energy as the optimization of link length ratio referred to 2R SCARA and 3R robot manipulators. For the given linear path with triangular velocity profile, the inverse kinematic and dynamic problems are examined in order to lead into solution of problem, which is suggested for optimal design of link lengths. Accordingly, optimal link length ratio is obtained with respect to each case.