• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.145-151
• /
• 2013

Purpose: In this study, we analyzed how the dose change by field size effects on atomic number of shielding materials while using 6 MeV election beam. Materials and Methods: The parallel plate chamber is mounted in $25{\times}25cm^2$ the phantom such that the entrance window of the detector is flush with the phantom surface. phantom was covered laterally with aluminum, copper and lead which thickness have 5% of allowable transmission and then the doses were measured in field size $6{\times}6$, $10{\times}10$ and $20{\times}20cm^2$ respectively. 100 cGy was irradiated using 6 MeV electron beam and SSD (Source Surface Distance) was 100 cm with $10{\times}10cm^2$ field size. To calculate the photon flux, electron flux and Energy deposition produced after pass materals respectively, MCNPX code was used. Results: The results according to the various shielding materials which have 5% of allowable transmission are as in the following. Thickness change rate with field size of $6{\times}6cm^2$ and $20{\times}20cm^2$ that compared to the field size of $10{\times}10cm^2$ found to be +0.06% and -0.06% with aluminum, +0.13% and -0.1% with copper, -1.53% and +1.92% with lead respectively. Compare to the field size $10{\times}10cm^2$, energy deposition for $6{\times}6cm^2$ and $20{\times}20cm^2$ had -4.3% and +4.85% respectively without shielding material. With aluminum it had -0.87% and +6.93% respectively and with lead it had -4.16% and +5.57% respectively. When it comes to photon flux with $6{\times}6cm^2$ and $20{\times}20cm^2$ of field sizes the chance -8.95% and +15.92% without shielding material respectively, with aluminum the number -15.56% and +16.06% respectively and with copper the chance -12.27% and +15.53% respectively, with lead the number +12.36% and -19.81% respectively. In case of electron flux in the same condition, the number -3.92% and +4.55% respectively without shielding material respectively, with aluminum the number +0.59% and +6.87% respectively, with copper the number -1.59% and +3.86% respectively, with lead the chance -5.15% and +4.00% respectively. Conclusion: In this study, we found that the required thickness of the shielding materials got thinner with low atomic number substance as the irradiation field is increasing. On the other hand, with high atomic number substance the required thickness had increased. In addition, bremsstrahlung radiation have an influence on low atomic number materials and high atomic number materials are effected by scattered electrons.

• Applied Biological Chemistry
• /
• v.39 no.6
• /
• pp.494-500
• /
• 1996

Uptake of hen metal ions by water dropwort (Oenanthe stolonifera DC.) and its cadmium-binding protein were studied to probe for good method to remove heavy metal contaminants from environments. The plant was cultured in the culture medium (pH 7.0) containing the various concentrations of $Cd^{2+}$, $Cr^{3+}$ or $Pb^{2+}$, for 3 and 7 days. The residual heavy metals deposited in roots linearly increased as the metal ions concentration increased up to 17 ppm for $Cd^{2+}$, 20 ppm for $Cr^{3+}$ and 50 ppm for $Pb^{2+}$. Above these concentrations, the plant growth was inhibited and the uptake rates of the metal ions decreased. The heavy metals absorbed by the plant were mostly deposited in roots. In particular, the residual concentration of lead in roots was about four times higher than those of cadmium and chromium. When cultured in the medium containing 20 ppm of each metal ion, 80% of cadmium, 90% of cromium and 96% of lead were deposited in roots out of the total residual metal ions in the plant. These values correspond to 6.1 mg of cadmium, 5.2 mg of chromium and 23.6 mg of lead per one gram of roots tissue on a dry weight basis. A cadmium-binding protein was partially purified by extraction, gel filtration and DEAE-Cellulose chromatography from water dropworts that was grown in the medium containing 20 ppm $Cd^{2+}$. The purified protein was a single band on SDS- and non-denaturing- polyacrylamide gel electrophoresis. Its molecular mass was estimated to be ca. 5,000 dalton by gel filteration. Analysis of amino acid composition of the protein indicated that it had a typical amino acid composition of heavy metal-binding protein in that it contained 27% of acidic amino acids and 9.9% of cysteine. However, it is likely that the protein is a new plant metal-binding protein, since its amino acid composition is somewhat different from those of phytochelatins that have been known so far.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.157-157
• /
• 2015

Recently, the growing interest in organic microelectronic devices including OLEDs has led to an increasing amount of research into their many potential applications in the area of flexible electronic devices based on plastic substrates. However, these organic devices require a gas barrier coating to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency OLEDs require an extremely low water vapor transition rate (WVTR) of $1{\times}10^{-6}g/m^2day$. The Key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required ($1{\times}10^{-6}g/m^2day$) is the suppression of defect sites and gas diffusion pathways between grain boundaries. In this study NBAS process was introduced to deposit enhanced film density single gas barrier layer with a low WVTR. Fig. 1. shows a schematic illustration of the NBAS apparatus. The NBAS process was used for the $Al_2O_3$ nano-crystal structure films deposition, as shown in Fig. 1. The NBAS system is based on the conventional RF magnetron sputtering and it has the electron cyclotron resonance (ECR) plasma source and metal reflector. $Ar^+$ ion in the ECR plasma can be accelerated into the plasma sheath between the plasma and metal reflector, which are then neutralized mainly by Auger neutralization. The neutral beam energy is controlled by the metal reflector bias. The controllable neutral beam energy can continuously change crystalline structures from an amorphous phase to nanocrystal phase of various grain sizes. The $Al_2O_3$ films can be high film density by controllable Auger neutral beam energy. we developed $Al_2O_3$ high dense barrier layer using NBAS process. We can verified that NBAS process effect can lead to formation of high density nano-crystal structure barrier layer. As a result, Fig. 2. shows that the NBAS processed $Al_2O_3$ high dense barrier layer shows excellent WVTR property as a under $2{\times}10^{-5}g/m^2day$ in the single barrier layer of 100nm thickness. Therefore, the NBAS processed $Al_2O_3$ high dense barrier layer is very suitable in the high efficiency OLED application.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.425-430
• /
• 2008

Hydrogen sulfide ($H_2S$) is a by-product of metabolism of amino acids including sulfur and alcoholic fermentation, it is generally thought of in terms of a poisonous gas. Though $H_2S$ can have a negative impact on the perceived quality of fermented drinks due to an undesirable aroma, it plays prominent roles as a neuromodulator in the mammalian brain as well as a smooth muscle relaxant. Nowadays studies on the proteins which produce $H_2S$ are carried out in various fields such as structure, function, and metabolism. Here we propose to develop a simple and rapid $H_2S$ forming assay method, which will lead to speed up preparing the $H_2S$ forming proteins for identification by MALDI-TOF MS analysis. We detected three kinds of proteins which produce $H_2S$ in the crude extract of Saccharomyces cerevisiae. Those proteins were cystathionie $\beta$-synthase, O-acetylserine sulfhydrylase, and cystathionine $\gamma$-lyase.

• Analytical Science and Technology
• /
• v.9 no.3
• /
• pp.310-319
• /
• 1996

According to the element analysis of Korean Quartz Porphyry, the ignition loss related to porosity was 7.03, 3.36, 2.09 and 0.73% in the order of Suanbo, Yeachen, Angang and Kyongsan. Extraction of minerals in deionized water and elimination effect of heavy metals in water by Quartz Porphyry were examined. When the Quartz Porphyry of the Suanbo, Yeachen of 0.5~2.0% concentration and the Quartz Porphyry of the Angang of 1.5% concentration were immersed and stirred in deionized water for 3 hours at 180rpm, various minerals concentration of the all stirred water were suitable for potable water. But Quartz Porphyry of the Yeachen was not suitable for potable water because of excess extraction of iron. The elimination rate of lead in single solution was 99% by Quartz Porphyry of the Suanbo, Yeachen and Angang of 3% concentration, Cadmium by Quartz Porphyry of the Suanbo of 7% concentration was eliminated about 98% in 1 hour. The copper was significantly eliminated in Quartz Porphyry of low concentration. Especially in Quartz Porphyry of Angang at 0.4% concentration, the rate of ion exchange was 99% in 4 hours. But elimination effect of arsenic in water by Korean Quartz Porphyry was very low.

• Journal of Veterinary Clinics
• /
• v.28 no.6
• /
• pp.581-585
• /
• 2011

Either the fasting during natural molting or the starvation in induced molting would be a severe metabolic stress to laying hens. The metabolic stress during starvation and subsequent refeeding syndrome could lead to unbalance of mineral homeostasis, including $Mg^{2+}$, $K^+$ and P required by ATP synthesis. Since $Mg^{2+}$ is a fundamental ion for normal metabolic processes and stress may not only increase in demands of $Mg^{2+}$ but also produce consequence of $Mg^{2+}$ deficiency, we investigated the changes of blood ionized and total ions related to starvation during molting in laying hens. We founded the significant decrease in blood $Mg^{2+}$ and $K^+$ accompanied by the changes of biochemical parameters relating to increased metabolic stress after molting. These results suggested that appropriate $Mg^{2+}$ and $K^+$ supplements to laying hens could have beneficial effects during molting and subsequent refeeding that could produce a severe hypomagnesemia and hypokalcemia.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.348-351
• /
• 2006

Bipolar plate, which forms about 50% of the stack cost, is an important core part with polymer electrolyte membrane in PEMFC. Bipolar plates have been commonly fabricated from graphite meterial having high electrical conductivity and corrosion resistance. Lately, many researchers have concentrated their efforts on the development of metallic bipolar plate and stainless steel has been considered as a potential material for metallic bipolar plate because of its high strength, chemical stability, low gas permeability and applicability to mass production. However, it has been reported that its inadequate corrosion behavior under PEMFC environment lead to a deterioration of membrane by dissolved metal ions and an increase in contact resistance by the growth of passive film therefore, its corrosion resistance as well as contact resistance must be improved for bipolar plate application. In this work, several types of coating were applied to 316L and their electrical conductivity and corrosion resistance were evaluated In the simulated PEMFC environment. Application of coating gave rise to low interfacial contact resistances below $19m{\Omega}cm^2$ under the compress force of $150N/cm^2$. It also made the corrosion potential to shift in the posit ive direct ion by 0.3V or above and decreased the corrosion current from ca. $9{\mu}A/cm^2$ to ca. $0.5{\mu}A/cm^2$ in the mixed solution of $0.1N\;N_2SO_4$ and 2ppm HF A coat ing layer under potentiostatic control of 0.6V and $0.75V_{SCE}$ for 500 hours or longer showed some instabilities, however, no significant change in coat Ing layer were observed from Impedance data. In addition, the corrosion current maintained less than $1{\mu}A/cm^2$ for most of time for potentiostatic tests. It indicates that high electrical conductivity and corrosion resistance can be obtained by application of coatings in the present work.

• Resources Recycling
• /
• v.9 no.1
• /
• pp.52-62
• /
• 2000

In order to maximize the recycling of converter slag to the more valuable fields, such as high quality aggregates for construction, cement industry and flux for ion making. It will be very important to control the compositions and properties of converter slag to suit the purpose of utilizastion. In this study, converter slag (STELCO, CANADA) was mixed with 5%~30% $SiO_2$and 7% carbon, and then reduced at $1650^{\circ}C$. After the reduction was completed, the reformed slags were cooled to room temperature in the furnace. All of the slags were then characterized using SEM-EDX, XRD and chemical analysis. Also the compressive strengths and densities of the reformed slags were measured to compare with natural aggregates. XRD analysis shows that th phases of reformed slags are changed from bredigite+merwinite mixed phases of 10% $SiO_2$added reduction to akermanite phases of 20% and 30% $SiO_2$ added reduction. But the SEM-EDX analysis revealed that the phase distribution of the reformed slags was changed very sensitively and complicately depends on the change of slag compositions. And also the properties of reformed slags are changed very much depend on the phase distribution. About one third of Cadmium and on fifth of Vanadium are remained in reduction reformed converter slag. Another heavy metal elements such as cobalt, zinc, lead are removed up to more than 90-95% of original slag. The compressive strength and density of 25% $SiO_2$ added and reformed slag is very near to natural granite. This is superior more than 10% to Thyssen's $SiO_2$ added and oxidized converter slag aggregates.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.46-49
• /
• 2003

Cu have been widely used as signal transmission materials for electrical electronic components owing to its high electrical conductivity. However, it's size have been limited to small ones due to its poor mechanical properties, Until now, strengthening of the copper at toy was obtained either by the solid solution and precipitation hardening by adding alloy elements or the work hardening by deformation process. Adding the at toy elements lead to reduction of electrical conductivity. In this aspect, if carbon nanofiber is used as reinforcement which have outstanding mechanical strength and electric conductivity, it is possible to develope Cu matrix nanocomposite having almost no loss of electric conductivity. It is expected to be innovative in electric conduct ing material market. The unidirectional alignment of carbon nanofiber is the most challenging task developing the copper matrix composites of high strength and electric conductivity In this study, the unidirectional alignment of carbon nanofibers which is used reinforced material are controlled by drawing process in order to manufacture the intermediary materials for the carbon nanofiber reinforced Cu matrix nanocomposite and align mechanism as well as optimized drawing process parameters are verified via experiments and numerical analysis. The materials used in this study were pure copper and the nanofibers of 150nm in diameter and of $10~20\mu\textrm{m}$ In length. The materials have been tested and the tensile strength was 75MPa with the elongation of 44% for the copper it is assumed that carbon nanofiber behave like porous elasto-plastic materials. Compaction test was conducted to obtain constitutive properties of carbon nanofiber. Optimal parameter for drawing process was obtained by experiments and numerical analysis considering the various drawing angles, reduction areas, friction coefficient, etc Lower reduction areas provides the less rupture of cu tube is not iced during the drawing process. Optimal die angle was between 5 degree and 12 degree. Relative density of carbon nanofiber embedded in the copper tube is higher as drawing diameter decrease and compressive residual stress is occurred in the copper tube. Carbon nanofibers are moved to the reverse drawing direct ion via shear force caused by deformation of the copper tube and alined to the drawing direction.

• Journal of Life Science
• /
• v.27 no.6
• /
• pp.708-725
• /
• 2017

Ionizing radiation is enough energy to interact with matter to remove orbital electrons, neutrons, and protons in the atom. Ionizing radiation like this leads to oxidizing metabolism that alter molecular structure through direct and indirect interactions of radiation with the deoxyribonucleic acid in the nucleus and cytoplasmic organelles or via products of cytoplasm radiolysis. These ionization can result in tissue damage and disruption of cellular function at the molecular level. Consequently, ionizing radiation-induced modifications of ion channels and transporters have been reported. When the harmful effects exceed those of homeostatic biochemical processes, induced biological changes persist and may be propagated to progeny cells. Also, Reactive oxygen species formed on the effect of ionizing radiation can get across into neighboring cells through the cell junctions that are responsible for intercellular chemical communication, and may there bring about changes characteristic to radiation damage. Depending on radiation dose, dose-rate and quality, these protective mechanisms may or may not be sufficient to cope with the stress. This paper briefly reviewed reports on ionization radiation effects on cellular level that support the concept of radiation biology. A better understanding of the biological effects of ionizing radiation will lead to better use of and better protection from radiation.