• Steel and Composite Structures
• /
• v.21 no.3
• /
• pp.479-500
• /
• 2016

Seismic design criteria allow enhancing the structural ductility and controlling the damage distribution. Therefore, detailing rules and design requirements given by current seismic codes might be also beneficial to improve the structural robustness. In this paper a comprehensive parametric study devoted to quantifying the effectiveness of seismic detailing for steel Moment Resisting Frames (MRF) in limiting the progressive collapse under column loss scenarios is presented and discussed. The overall structural performance was analysed through nonlinear static and dynamic analyses. With this regard the following cases were examined: (i) MRF structures designed for wind actions according to Eurocode 1; (ii) MRF structures designed for seismic actions according to Eurocode 8. The investigated parameters were (i) the number of storeys; (ii) the interstorey height; (iii) the span length; (iv) the building plan layout; and (v) the column loss scenario. Results show that structures designed according to capacity design principles are less robust than wind designed ones, provided that the connections have the same capacity threshold in both cases. In addition, the numerical outcomes show that both the number of elements above the removed column and stiffness of beams are the key parameters in arresting progressive collapse.

• Journal of the Korean housing association
• /
• v.19 no.2
• /
• pp.83-91
• /
• 2008

Recently, many urban traditional houses have been replaced by villas and apartments for the inconvenience of lifestyle. The aim of this study is to survey the present distribution condition, research the extension and alteration, focused on Korean urban traditional houses in Cheongju which is the old city in an inland area, and inquire into the behavior patterns of an aged living alone livelihood and a large household. As a result, in the typical 'ㄱ' types of central inland houses, all the rear and side parts are nearly extended except facades facing court, while the detached houses for an aged living alones and tenants have enlarged rooms, kitchen and 'Daecheong' within the existing wooden framework. We could grasp the enlargement of room, 'Daecheong', corridor, and storage in the layout of the existing house. There are so many alterations such as the stand-up kitchen and a water closet. A new extension on an old house was intensely built for tenants.

• Journal of Korea Multimedia Society
• /
• v.21 no.4
• /
• pp.499-512
• /
• 2018

The application of analytical techniques for the rational determination of problems arising from management science and corporate management. In a way that is the opposite of the repair plan that can predict accurate results is increasing utilization of the complex-based analysis methodology. In this study, we examined the application of physical space and the methodological utilization of the pedestrian model analysis that applied the simulation to the Health Checkup Center. The conclusions are as follows. First, the spatial analysis and measurement for empirical research has confirmed that the efficiency assessment through the pedestrian model simulation can lead to an objective evaluation. Second, it seems to be able to reduce the queue through a change in the number of services of the low-pressure and the hearing laboratory, the recovery room with a high proportion of male disturbances and relatively long use time. The third, the spatial density analysis and the time required to reduce the density change in comparative analysis, and the spatial layout changes, the increase in the capacity of 80 people, approximately 16 minutes to shorten the process duration.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.4
• /
• pp.207-221
• /
• 2010

This study aim to suggest how alter the korean traditional image design for umbrellas by sublimation transfer digital textile printing. Umbrellas are highly depend on design and made from polyester fiber which is proper item to utilize sublimation transfer digital textile printing. Sublimation transfer digital textile printing system can use computer system to create the delicate high dense images and one full layout through the hole umbrella. It can create distinctive style of design compare with former screen printing umbrella design. As a result of this study, Korean traditional images were adopted and recreated for umbrellas as the modern practical item. 7 of umbrella designs were developed and sample umbrellas could be produced in short period comparing with screen printing process. Through this study, as green printing process, sublimation transfer digital textile printing will be more applied to manufacture high quality textile products along with design development, thus it is expected as an alternative plan to leads growth of umbrella industries.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.5
• /
• pp.70-78
• /
• 2003

From the viewpoint of the importance of the division theory based on topography(pyungsu) derived from the uniqueness in topography, not to mention of the function of ridge in ruban areas, the destroy of ridges should be prevented from the development of hill areas. This study intends to propose the basic concepts and principles to protect the ridge axis with green in open space and landscape planning. The main results are summarized as follows : First, eco-bridge across the ridges will be connected for the purpose of ecosystem restoration. Second, the protection and restoration of green ridge axis can be completed by Green Structure Plan which has principles and standards such as. - layout of development axis and establishment of rules on preservation - the practical use of various preservation methods and the standards suitable to the methods - laying down the standards of restoration according to the height from ground level - the application of zoning such as height district and urban design for preservation Finally, the design of implementation tools must be needed for protection and restoration.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.3
• /
• pp.1731-1738
• /
• 1969

1. For the purpose of analyzing the plan of new reclamation project and its evaluation, actual studies for the existing polders are required. 2. The variations of the salt content of soil, yields and staus of its plantation have been studied for six areas reclaimed in relatively recent years, including Kangwha, Daechon, Chopo, Eushin, Kwangyang and Chinkyo. 3. The annual yields from the project were only 52 percent in the first year as compared with kilograms per 10 a. in the Hachirogata polder in Japan. 4. Such a low productivity in the existing polders in Korea is chiefly by the high ground water table, unfavourable conditions of subdrainage in the root zone, and saline damages of existing high salt content. That is because the depth of drainage ditches is too shallow and layout distance between every drainage ditches is also too long. 5. In order to overcom such a uncertiainties, the drainagedistance suitable for these areas has been Calculated by using the Donnans formula. Applying to the formula, drainage facilities are so densie that land use capability may be decreased. 6. For the purpose of ensuring the effective desalinization and high land use capability, feasible interval to establish the culvert has been studied in accordance with both formulas of Donnan and Hoogan. 7. In order to accomplish the early desalinization in both areas of new reclamation or existing polders, the problems of internal drainages should be resolved. for this puprose in addition to the endeavour of the personnels actually engaged in such works. The actual support of the related agencies for financial assitance is required.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.2
• /
• pp.116-123
• /
• 2018

These days, geographic information system has released in everyday life and industries. However, the shipyard only uses it to manage the layout of the yard. In this study, we apply the Geographic Information System to shipbuilding block logistics simulation to analyse the behavior of bogies and forklifts carrying blocks and materials in the shipyard. The shipyard manages daily block logistics plans at the execution planning stage. However, since it is a daily plan, it is difficult to respond to an unexpected situation immediately, and application to judge a certain value or higher value is insufficient. Therefore, a simulation model was created using the shape and attribute information inherent in the geographic information system to verify and improve the block logistics of the mid-and long-term yards. Through this simulation model, we will analyse loads on the workplace, stockyard, and road, and contribute to overall logistics improvement from the point of view of resource planning. In addition, the results of the simulation are reflected in the planning, to help support various decisions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.4
• /
• pp.362-373
• /
• 2012

The ship recycling industry is growing rapidly. It is estimated that the International Maritime Organization's (IMO) decision to phase-out single hull tankers by 2015 will result in hundreds of ships requiring disposal. At present, the ship recycling industry is predominantly based in South Asia. Due to the bad practice of current scrapping procedure, the paper will highlight the harm occurring to health, safety and environment. The efforts of the Marine Environment Protection Committee (MEPC) which led to the signing of the Hong Kong International Convention are also reviewed. The criteria and standards required to reduce the risk and damage to the environment are discussed and a proposed plan for the safe scrapping of ships is then presented. A technological and economic study for the ship recycling in Egypt is carried out as a case study. This includes the ship recycling facility size and layout. The equipment and staff required to operate the facility are also evaluated. A cost analysis is then carried out. This includes site development, human resources, machineries and equipment. A fuzzy logic approach is used to assess the benefits of the ship breaking yard. The use of the fuzzy logic approach is found suitable to make decisions for the ship breaking industry. Based on given constraints, the proposed model has proved capable of assessing the profit and the internal rate of return.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.7
• /
• pp.349-361
• /
• 2002

Occasionally, equipment in a distribution system fails due to damage from weather, vandalism, or other causes. Failures and unexpected events do not always occur as and where expected. Therefore, a good contingency plan, multi-zone or otherwise, provides flexibility by locating switches at various strategic locations so that parts of a feeder can be picked up in the event of line outages at various places. It is possible to create feeder system layout that achieve remarkable contingency support economics, even as their normal peak loading levels approach thermal capacity, by utilizing six, seven, or even nine switchable zones per feeder. But many switchable zones per feeder are of questionable practicality and effectiveness, because of the complexity and time required for the switching operation. In practice, a zonal scheme with between three and four zones will usually provide complete contingency backup for all feeders. Line switches have both capital and maintenance costs, the planning for multi-zonal schemes is considerably more difficult than or loop or single-zone systems, and the required switching operations required during contingencies take more time. But multi-zonal schemes are used because these costs come to far less than the cost of additional capacity required for loop or single-zone. In this paper, we present the optimal number of switchable zones per feeder in Kora distribution system.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.31-35
• /
• 2001

Simulation --- The ideal tool for BPR. Work now and CASE tools are static modeling tools. Based on our own customers surveys, we have discovered that the use of process modeling tools thus far has focused on modeling the current(What-Is) state of a business. We have found that 90 percent of reengineering projects, the modeling tools of choice have been flowcharting tools. Static models offer help in understanding the overall nature of an existing process. However, static models can not really help you see the step by step motions towards completion of your goals. In static modeling, you see two pictures in time, usually taken at the current state and final state models of your reengineering project. Static models are usually not object oriented, therefore can not show facility or office layout and movement of entities and objects throughout the facility. However, this does not mean that static modeling does not have its application nor add value to the user as in a few success stories. Simulation helps the team analyze the complex aspects of the project. Many times a plan that looks good on paper might turn out entirely different when put into action. Therefore, simulation helps you look at how situations might work before actual implementation. In particular, computer simulation models help you view a reengineered condition before they are rolled-out. Items such as a lead time and resource allocation.