• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.287-298
• /
• 2003

The feasibility of using neural networks to model the complex relationship between piezocone measurements and the undrained shear strength of clays has been investigated. A three layered back propagation neural network model was developed based on actual undrained shear strengths, which were obtained from the isotrpoically and anisotrpoically consolidated triaxial compression test(CIUC and CAUC), and piezocone measurements compiled from various locations around the world. It was validated by comparing model predictions with measured values about new piezocone data, which were not previously employed during development of model. Performance of the neural network model was compared with conventional empirical method, direct correlation method, and theoretical method. It was found that the neural network model is not only capable of inferring a complex relationship between piezocone measurements and the undrained shear strength of clays but also gives a more precise and reliable undrained shear strength than theoretical and empirical approaches. Furthermore, neural network model has a possibility to be a generalized relationship between piezocone measurements and undrained shear strength over the various places and countries, while the present empirical correlations present the site specific relationship.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.905-912
• /
• 2004

It is a study LVMPD to solve the fairness problem of inter-session shared bandwidth. Whenever congestion occurs in one session, the highest layer is dropped. Also the highest layer of other sessions in non-congestion is dropped by iner-session fairness. While there is spare bandwidth, receivers of session in non-congestion can't use bandwidth efficiently. In this paper, we proposed a distribution method to use efficiently spare bandwidth that occurred by inter-session fairness. In our method, we considered the highest layer those receivers receiving and the higher layer those receivers requesting. The sender assigns the packet-deleting priority to packets when congestion occurs in receivers, and sets layer add/drop flag when receivers of session in non-congestion request the higher layer. The switch deletes packets with packet-deleting priority and transfers packets with layer add/drop flag for session in non-congestion. Therefore receivers of session in non-congestion can add the higher layer. In experimental results, it was known that proposed algorithm use the inter-session shared bandwidth more effectively compared with already known method.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.891-900
• /
• 2005

This paper studies network recovery methods for WDM optical mesh networks, concentrating on improving spare resource utilization. The resource efficiency can be obtained by sharing spare resources needed for network recovery. To improve the sharability of spare resources in WDM networks, methods to share backup paths us well as spare capacity should be studied. The proposed method in this paper uses multiple ring-covers and this method provides fast and simple recovery operation by exploiting the characteristics of logical ring topology, and also provides efficient resource utilization by using multiple distributed backup paths to improve the sharability of overall spare resources in the networks. This method can provide layered reliability to network service by enabling hierarchical robustness against multiple failures. The performance results show that the proposed method provide improved resource efficiency for single failure and enhanced robustness for multiple failures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.12
• /
• pp.897-903
• /
• 2019

This paper represents an simplified design method of hybrid composites. The proposed method is very simple compared to conventional design approaches and easy to apply to practical design problems. The method is based on not complex optimization approaches but conventional theories. The equivalent dielectric properties concept and multi-layered dielectric slab theory are an important theoretical background of the proposed method. This approach divide the design domain into several domain which have theoretically different electro- agnetic functionality. Then, the domains are expressed by equivalent dielectric properties. Numerical analysis are performed several types of design candidates. S-parameter test for final design was conducted for validate the proposed approach indirectly.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.860-868
• /
• 2008

Seismic safety analysis of rockfill dams are consist of the stability analysis as an simplifed method and the dynamic analysis as an detailed method. When high risk dams such as Multi-purpose dams were often applied detailed method by dynamic analysis, dynamic properties of dam materials such as shear modulus are considered as most important factor. Dynamic material properties such as shear modulus had to be investigated by cyclic triaxial test et al. during design and construction stage but these were not conducted because of the condition of domestic seismic design technique. MASW and SASW methods had been applied as a non destructive method to investigate dynamic material properties of existing rockfill dam, has no problems in dam safety at present. These methods were usually performed under the assumptions that the subsurface can be described horizontally homogeneous and isotropic layers. Recent studies(Marwin, 1993, Kim, 2001) showed that surface waves generated through inclined structures have different characteristics from those through a horizontally homogeneous layered model. further Kim et al(2005) and Min and Kim(2006) showed that central core type rockfill dam overestimated the shear wave velocities as increasing the depth through the 3D numerical modelling dut to the effect of outer rockfill and geometrical reasons In this study the results of shear wave velocities of seven rockfill dams form comprehensive facility review, was carried out from 2003 to 2007, were collected and analysed to establish the shear wave velocity distribution characteristics in increasing confining stress in rockfill dams and surface wave velocity ranges in rockfill dam through MASW and the limitation in application are discussed to be utilized as an reference value for dynamic analysis.

• The KIPS Transactions:PartD
• /
• v.16D no.6
• /
• pp.859-870
• /
• 2009

Despite the surge in the research for keyword search method over relational database, only little attention has been devoted to studying on relational data stream.The research for keyword search over relational data stream is intense interest because streaming data is recently a major research topic of growing interest in the data management. In this regard we first analyze the researches related to keyword search methodover relational data stream, and then this paper focuses on the method of minimizing the join cost occurred while processing keyword search queries. As a result, we propose an advanced keyword search method that can yield more meaningful results for users on relational data streams. We also propose a query optimization method using layered-clustering for efficient query processing.

• Journal of Digital Contents Society
• /
• v.8 no.4
• /
• pp.441-449
• /
• 2007

In video coding, motion estimation is a process to estimate the pixel of the current frame from the reference frame, which affects directly the predictive quality and the encoding time. This paper is related to AHHS(Adaptive Hierarchical Hexagon Search) using spatio-temporal motion activity for fast motion estimation. The proposed method defines the spatio-temporal motion activity of the current macroblock using the motion vectors of its spatio-temporally adjacent macroblocks, and then conventional AHS(Adaptive Hexagon Search) is performed if the spatio-temporal motion activity is lower, otherwise, hierarchical hexagon search is performed on a multi-layered hierarchical space constructed by multiple sub-images with low frequency in wavelet transform. In the paper, based on computer simulation results for multiple video sequences with different motion characteristics, the performance of the proposed method was analysed and assessed in terms of the predictive quality and the computational time. Experimental results indicate that the proposed method is both suitable for (quasi-) stationary and large motion searches. The proposed method could keep the merit of the adaptive hexagon search capable of fast estimating motion vectors and also adaptively reduce the local minima occurred in the video sequences with higher spatio-temporal motion activity.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.511-520
• /
• 2000

Ultrasonic pulse echo method comes to be difficult to apply to the multi-layered structure with very thin layer, because the echoes from the top and the bottom of the layer are superimposed. We can easily meet this problem when the silicon chip layer in the semiconductor is inspected by a SAM equipment using fairly low frequency lower than 20MHz by which severe attenuation in the epoxy mold compound of packaging material can be overcome. Conventionally, deconvolution technique has been used for the decomposition of superimposed UT signals, however it has disabilities when the waveform of the transmitted signal is distorted according to the propagation. In this paper, the wavelet transform based deconvolution(WTBD) technique is proposed as a new signal processing method that can decompose the superimposed echo signals with superior performances compared to the conventional deconvolution technique. WTBD method uses the wavelet transform in the pre-stage of deconvolution to extract out the common waveform from the transmitted and received signal with distortion. Performances of the proposed method we shown by through computer simulations using model signal with noise and we demonstrated by through experiments for the fabricated semiconductor sample with partial delamination at the top of silicon chip layer.

• Korean Journal of Remote Sensing
• /
• v.26 no.1
• /
• pp.21-27
• /
• 2010

This paper presents a numerical simulation of the radar backscattering from oil spills on ocean surface. At first, a one-dimensionally rough sea surface is numerically generated for a given wind speed at HEBEI SPIRIT accident. Then, an oil-spilled sea surface is represented with a two-layered medium, which is generated by adding a thin low-dielectric oil layer on the randomly-rough highdielectric sea surface. The backscattering coefficients of various oil-spilled sea surfaces are obtained using the Method of Moments and Monte Carlo technique for various surface roughness, oil-layer thicknesses, frequencies, polarizations and incidence angles. The numerical method is verified with theoretical models for simple structures. The reduction of the backscattering coefficients due to the lowdielectric oil-layers on sea surfaces has been analyzed. These numerical results will help to detect any oil spills on sea surfaces, and consequently, to classify SAR images.

• Journal of Rhinology
• /
• v.25 no.2
• /
• pp.123-129
• /
• 2018

Background and Objectives: Endoscopic repair of cerebrospinal fluid (CSF) leak can avoid morbidity of open approaches and has shown a favorable success rate. Free mucosal graft is a good method, and multi-layered repair is more favorable. The inferior turbinate has been commonly utilized for the free mucosal graft, but we newly designed it as a bone-periosteal-mucosal composite graft for multilayered reconstruction. Subjects and Method: Four subjects with a skull base defect were treated with this method. The inferior turbinate was partially resected including the conchal bone and was trimmed according to defect size. Both bony parts and periosteum were preserved on the basolateral side of the mucosa as a composite graft. The graft was applied to the defect site using an overlay technique. Results: All cases were successfully repaired without any complications. Three of them had a defect size greater than 10-12 mm, and the graft stably repaired the CSF leakage. Conclusion: Endoscopic repair of CSF leakage using inferior turbinate composite graft is a simple and easy method and would be favorable for defect sizes greater than 10 mm.