• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2001년도 추계학술강연 및 발표대회
• /
• pp.34-34
• /
• 2001

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.373-376
• /
• 2000

The modified Moonie(Cymbal) transducer has been investigated for an accelerometer application. This paper present a wind-mill type ultrasonic motors using ternary piezoelectric ceramics and aluminum endcaps applied by cymbal transducer. The maximum displacement was increased depend on applied voltage and layer number. The multi-layer was fabricated by tape casting using doctor-blade process. The maximum displacement of multi-layered ultrasonic motor was much higher than that of one-layered.

• 한국자기학회지
• /
• 제8권4호
• /
• pp.231-240
• /
• 1998

고밀도 자성박막헤드 및 센서용 3층 자기저항소자의 제작 및 재생신호특성에 대해 연구하였다. 컴퓨터계산모형에 의해 설계된 3층 자기저항소자의 자기저항곡선은 외부자장 -15~+22 Oe 이상에서 포화되었으며, 이 곡선은 약 4 Oe 정도 선형화영역으로 이동되었다. 실제 제작된 소자에서 자기저항곡선은 외부자장 $\pm$15 Oe 이상에서 포화되었으며, tyjs형화 영역으로 4 Oe 만큼 이동되었다. 실제소자와 계산모형에서의 MR 반응곡선은 서로 잘 일치함을 보였다. 또한 실제소자에서 재생출력신호의 실험결과는 외부자장 $\pm$4 Oe 범위 내에서 정현파를 유지하였다. 이 자장 범위 내에서 3층 자기저항소자로 제작된 헤드는 양호한 재생출력특성을 나타낼 것으로 판단된다. 이는 박막물성을 제어하는 진공증착기술과 소자제작의 효율적인 제조공정으로 사용하는데 유익할 것이다.

• 한국전자파학회논문지
• /
• 제24권2호
• /
• pp.122-127
• /
• 2013

본 논문에서는 적층형 유전체 도파관 필터를 제안한다. 횡 방향으로 공진부가 연결되는 유전체 도파관 필터는 단수가 증가함에 따라 길이가 증가하여 제작시 어려움이 따른다. 제안된 구조는 세라믹을 이용하여 일부 공진부를 적층 형태로 변경하여 설계 제작한 것이다. 상대 유전율이 22인 세라믹을 이용하여 기존의 도파관 필터보다 25 % 정도 크기가 줄었으며, SMD 형태로 PCB에 표면 실장이 가능하도록 하였다.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.272-279
• /
• 2017

The heterocoagulation of latex is a simple and useful method to fabricate various polymer nanocomposites in which a precise control of the colloid stability is essential. In this work, a multi-layered graphenes (MLGs)/poly(styrene-co-butyl acrylate) (P(S-co-BA)) nanocomposite having an excellent dispersion of MLGs was prepared via the sudden heating heterocoagulation process. The P(S-co-BA) component was obtained by emulsion polymerization. This process can effectively shorten the process and particles growth steps. The colloid stability of these dispersions was controlled by factors such as ionic charge, temperature, and reaction times. The influence of these factors on heterocoagulation was evaluated and the properties of the nanocomposites were investigated. The conductivity of the MLGs/P(S-co-BA) nanocomposites increased from -11.53 to -5.70 S/cm for an increase in MLG content from 0.01 to 5 wt%. Moreover, percolation threshold was observed in the case of 0.01 wt% MLGs.

• 한국레이저가공학회지
• /
• 제12권4호
• /
• pp.1-5
• /
• 2009

Conventional patterning based on wet-process for multi-layered film is a relatively complex and costly process though it is a necessary step for fabrication of TFT-LCD module. Recently, a direct pattering by laser has been studied because it is low cost and simple process compared to the wet process. In this work, the selective removal process of multi-layered film (polyimide/indium tin oxide/glass) is studied by modeling the thermal and mechanical behavior for multi-layered structure. Especially, the effects of thickness of polyimide layer are examined.

• Archives of Metallurgy and Materials
• /
• 제67권4호
• /
• pp.1531-1534
• /
• 2022

In this study, a SUS316L membrane having double layered pore structures was fabricated, and the pore characteristics were analyzed after coating with a spherical powder and a flake-shaped powder on a disk-shaped SUS316L support using a wet powder spraying process. The thickness of the coated layer was checked using an optical microscope, and air permeability was measured using a capillary flow porometer. When the coating amount was similar, the fine porous layer prepared using flake powder was thicker and showed higher porosity. In the case of a similar thickness, the case of using flake powder was half of the amount of spherical powder used. Therefore, it was confirmed that it is possible to manufacture a metal membrane having a high filter efficiency even with a small coating amount when using the flake powder.

• 한국분말재료학회지
• /
• 제28권4호
• /
• pp.287-292
• /
• 2021

In this study, the layered structures of immiscible Fe and Cu metals were employed to investigate the interface evolution through solid-state mixing. The pure Fe and Cu powders were cold-consolidated by high-pressure torsion (HPT) to fabricate a layered Cu-Fe-Cu structure. The microstructural evolutions and flow of immiscible Fe and Cu metals were investigated following different iterations of HPT processing. The results indicate that the HPT-processed sample following four iterations showed a sharp chemical boundary between the Fe and Cu layers. In addition, the Cu powders exhibited perfect consolidation through HPT processing. However, the Fe layer contained many microcracks. After 20 iterations of HPT, the shear strain generated by HPT produced interface instability, which caused the initial layered structure to disappear.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.365-366
• /
• 2010

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.302.1-302.1
• /
• 2016

Solution-processed amorphous metal-oxide thin-film transistors (TFTs) are considered as promising candidates for the upcoming transparent and flexible electronics due to their transparent property, good performance uniformity and possibility to fabricate at a low-temperature. In addition, solution processing metal oxide TFTs may allow non-vacuum fabrication of flexible electronic which can be more utilizable for easy and low-cost fabrication. Recently, for high-mobility oxide TFTs, multi-layered oxide channel devices have been introduced such as superlattice channel structure and heterojunction structure. However, only a few studies have been mentioned on the bias illumination stress in the multi- layered oxide TFTs. Therefore, in this research, we investigated the effects of bias illumination stress in solution-processed bilayer oxide TFTs which are fabricated by the deep ultraviolet photochemical activation process. For studying the electrical and stability characteristics, we implemented positive bias stress (PBS) and negative bias illumination stress (NBIS). Also, we studied the electrical properties such as field-effect mobility, threshold voltage ($V_T$) and subthreshold slop (SS) to understand effects of the bilayer channel structure.