• 한국환경과학회지
• /
• 제14권6호
• /
• pp.555-563
• /
• 2005

This study presents the characteristics of nocturnal inversion layer and their effect on the concentration variations of surface air pollutants using tethersonde and automatic weather station (AWS, 2 layer tower) system in Ulsan during 2003, The method for the distinction of inversion intensity was decided based on the sum of nocturnal temperature gradient. As the results, there was a close correlation (correlation coefficient of 0,76) between the maximum inversion height obtained from tethersonde and the sum of nocturnal temperature gradient. The air pollutant concentration was also directly proportional to the inversion intensity. When the inversion intensity was strong in the nighttime, ozone $(O_3)$ concentration was lower, while nitrogen dioxide $(NO_2)$ concentration was higher. The carbon monoxide (CO) concentration was gradually higher according to the nocturnal inversion intensity, whereas sulfur dioxide $(SO_2)$ concentration was relatively constant. In addition, we found that there was no correlation between the inversion intensity and TSP concentration.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1376-1380
• /
• 2007

대전입자형 디스플레이는 높은 대조비와 넓은 시야각 그리고 빠른 응답속도를 가졌다. 본 연구에서는 음전하를 띈 노란색 대전입자와 양전하를 띈 검은색 대전입자를 사용하여 화상을 표시하였으며, 기존의 혼합된 대전입자를 충전하는 방식과는 대비 패널의 상판과 하판에 형성된 셀에 두 대전입자를 전계에 의해 각각 어드레싱하였다. 그리고 상판과 하판을 합착한 후 Aging을 하여 패키징을 하였으며, 합착된 패널은 전극 설계에 의해 4 채널의 전극에 Matrix 구동을 했다. 패널에 충전되는 layer 수는 최소 2 layer가 요구되며, 본 연구에서는 대전입자의 layer는 격벽의 높이로 조절하였다. 패키징된 패널의 상판에 양의 전압을 인가한 결과, 노란색 대전입자는 상판의 전극으로 이동하고 검은색 대전입자는 하판의 전극으로 이동하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1651-1652
• /
• 2006

In this study, the 2-step methode by ALD equipment was used to improve the characteristics of ZnO thin films used in a piezoelectric layer when the FBAR devices of a SMR type are fabricated. The Height of formed buffer layer was $400{\AA}$ and ZnO thin film of $13600{\AA}$ was deposited by RF sputter on the buffer layer. When ZnO thin films are deposited, deposition conditions such as pressure, injection time of source and purge time were changed variously. The characteristics of piezoelectric layer such as a crystal orientation and micro-structure of deposited ZnO thin films were studied by SEM, AFM and XRD.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.143-149
• /
• 2008

A numerical study was performed for a vane of a compressor with a high-turning angle and meridional divergence. At first, the effect of the suction position was discussed. Then, the optimal suction position was applied to the cascades with the aspect ratio of 2.53 and 0.3, respectively, to get the knowledge of the effect of the endwall boundary layer removal on the secondary flow along the blade height. At last, using the critical principles of the three-dimensional separation, the topological structures of the flow patterns of the body surfaces and the separation configurations were discussed in detail. The results show that the largest reduction of the total loss can be achieved when the suction slot is near the suction side. The topological structure as well as the separation configuration varies due to boundary layer removal, which restrains the flow separation at the corner and delays or depresses the separation on the suction surface. Compared with the original cascade, the cascade with the endwall boundary layer removal has a higher blade loading along the most span. Furthermore the flow loss decreases and distributes uniformly along the span.

• Steel and Composite Structures
• /
• 제43권2호
• /
• pp.229-240
• /
• 2022

The main objective of this work is presenting a mathematical model for the concrete slab with fiber reinforced polymer (FRP) layer under the impact load. Impacts are assumed to occur normally over the top slab and the interaction between the impactor and the structure is simulated using a new equivalent three-degree-of-freedom (TDOF) spring-mass-damper (SMD) model. The structure is assumed viscoelastic based on Kelvin-Voigt model. Based on the sinusoidal shear deformation theory (SSDT), energy method and Hamilton's principle, the motion equations are derived. Applying DQM, the dynamic deflection and contact force of the structure is calculated numerically so that the effects of mass, velocity and height of impactor, boundary conditions, FRP layer, structural damping and geometrical parameters of structure are shown on the dynamic deflection and contact force of system. Results show that considering structural damping leads to lower dynamic deflection and contact force. In addition, increasing the impact velocity of impactor yields to increases in the maximum contact force and deflection while the contact duration is decreased. The result shows that the contact force and the central deflection of the structure decreases and the contact time decreases with assuming FRP layer.

• 한국환경과학회지
• /
• 제13권8호
• /
• pp.721-731
• /
• 2004

The dispersion of suspended particulates in the coastal complex terrain of mountain-inland basin (city)-sea, considering their recycling was investigated using three-dimensional non-hydrostatic numerical model and lagrangian particle model (or random walk model). Convective boundary layer under synoptic scale westerly wind is developed with a thickness of about I km over the ground in the west of the mountain, while a thickness of thermal internal boundary layer (TIBL) is only confined to less than 200m along the eastern slope of the mountain, below an easterly sea breeze circulation. At the mid of the eastern slop of the mountain, westerly wind confronts easterly sea breeze, which goes to the height of 1700 m above sea level and is finally eastward return flow toward the sea. At this time, particulates floated from the ground surface of the city to the top of TIBL go along the eastern slope of the mountain in the passage of sea breeze, being away the TIBL and reach near the top of the mountain. Then those particulates disperse eastward below the height of sea-breeze circulation and widely spread out over the coastal sea. Total suspended particulate concentration near the ground surface of the city is very low. On the other hand, nighttime radiative cooling produces a shallow nocturnal surface inversion layer (NSIL) of 200 m thickness over the inland surface, but relatively thin thickness less than 100m is found near the mountain surface. As synoptic scale westerly wind should be intensified under the association of mountain wind along the eastern slope of mountain to inland plain and further combine with land-breeze from inland plain toward sea, resulting in strong wind as internal gravity waves with a hydraulic jump motion bounding up to about 1km upper level in the atmosphere in the west of the city and becoming a eastward return flow. Simultaneously, wind near the eastern coastal side of the city was moderate. Since the downward strong wind penetrated into the city, the particulate matters floated near the top of the mountain in the day also moved down along the eastern slope of the mountain, reaching the. downtown and merging in the ground surface inside the NSIL with a maximum ground level concentration of total suspended particulates (TSP) at 0300 LST. Some of them were bounded up from the ground surface to the 1km upper level and the others were forward to the coastal sea surface, showing their dispersions from the coastal NSIL toward the propagation area of internal gravity waves. On the next day at 0600 LST and 0900 LST, the dispersed particulates into the coastal sea could return to the coastal inland area under the influence of sea breeze and the recycled particulates combine with emitted ones from the ground surface, resulting in relatively high TSP concentration. Later, they float again up to the thermal internal boundary layer, following sea breeze circulation.

• 한국지반공학회지:지반
• /
• 제14권6호
• /
• pp.153-166
• /
• 1998

본 논문은 균질 및 비균질 낙동강 사질토 지반에서 수평 및 경사하중을 받은 강관 말뚝의 수평거동에 대한 모형실험 결과들을 고찰하였다. 비균질 지반은 상부와 하부층의 2개층으로 이루졌다. 본 연구의 목적은 말뚝의 수평거동에 대한 경사하중$(Q_\beta)$, 말뚝 근입길이에 대한 하부지반의 높이비 (H/S), 그리고 상.하부지반의 지반반력계수비$(E_{h1}E_{h2})$의 영향에 관하여 실험적인 연구를 수행하고 이러한 영향들을 정량화 할 수 있는 실험결과를 얻었다. 모형실험 결과들에 의하면, 비균질 지반에서 수평거동은 다른 인자들보다 $E_{h1}E_{h2}$에 더 의존하는 것으로 나타났다. 균질지반에 대한 비균질 지반의 수평변위비$(y_{H/L}/y_{H/L=0}$)와 말뚝 근입길이에 대한 하부지반의 높이비(H/L)의 관계는 지수 함수식으로 회귀분석 되었다. 경사하중을 받는 경우의 휨 모멘트-깊이 관계는 수평하중을 받는 말뚝의 경우와 상이하게 나타났으며, 상대밀도 90%에서는 최대 휨모멘트 발생깊이는 수평하중을 받는 경우보다 약 70% 깊어졌다.

• 한국화재소방학회논문지
• /
• 제29권4호
• /
• pp.15-20
• /
• 2015

이 연구는 노인관련시설에 스프링클러 설치유무와 종류에 따른 연기층 및 공기층의 온도변화와 연기층의 높이변화를 화재시뮬레이션을 통해 비교한 것으로 복사열은 거실에 표준반응형 헤드가 작동한 경우는 플래시오버 발생조건을 초과하였으나 조기반응형 헤드는 플래시오버가 발생되지 않는 것으로 나타났다. 인체표면의 경우도 조기 반응형 헤드가 작동하면 열유속의 최대값이 $2,293W/m^2$에 머물러 인체화상 위험조건인 $4,000W/m^2$ 이하가 되어 거주자가 열에 의해 인체화상은 입지 않는 것을 알 수 있다. 화재실의 최고온도는 연기층 및 공기층 모두 인명안전기준을 초과하였으나 일정시간 후 급격히 하강하여 인명안전기준에서 요구하는 온도 이하로 유지되는 것을 알 수 있었다. 연기층의 높이는 조기반응형 헤드가 작동하면 연기층을 1.1 m 이상으로 유지할 수 있어서 표준반응형 헤드가 작동한 경우보다 연기층 하강을 더 지연시킬 수 있음을 알 수 있다.

• Journal of Magnetics
• /
• 제7권3호
• /
• pp.63-71
• /
• 2002

Three fabrication techniques for forming thin barrier layer with uniform thickness and large barrier height in magnetic tunnel junction (MTJ) are discussed. First, the effect of immiscible element addition to Cu layer, a high conducting layer generally placed under the MTJ, is investigated in order to reduce the surface roughness of the bottom ferromagnetic layer, on which the barrier is formed. The Ag addition to the Cu layer successfully realizes the smooth surface of the ferromagnetic layer because of the suppression of the grain growth of Cu. Second, a new plasma source, characterized as low electron energy of 1 eV and high density of $10^{12}$ $cm^{-3}$, is introduced to the Al oxidation process in MTJ fabrication in order to reduce damages to the barrier layer by the ion-bombardment. The magnetotransport properties of the MTJs are investigated as a function of the annealing temperature. As a peculiar feature, the monotonous decrease of resistance area product (RA) is observed with increasing the annealing temperature. The decrease of the RA is due to the decrease of the effective barrier width. Third, the influence of the mixed inert gas species for plasma oxidization process of metallic Al layer on the tunnel magnetoresistance (TMR) was investigated. By the use of Kr-O$_2$ plasma for Al oxidation process, a 58.8 % of MR ratio was obtained at room temperature after annealing the junction at $300{^{\circ}C}$, while the achieved TMR ratio of the MTJ fabricated with usual Ar-$0_2$ plasma remained 48.4%. A faster oxidization rate of the Al layer by using Kr-O$_2$ plasma is a possible cause to prevent the over oxidization of Al layer and to realize a large magnetoresistance.

• 한국습지학회지
• /
• 제10권3호
• /
• pp.9-26
• /
• 2008

순천만에서 갈대군락이 저토의 이화학적 특성에 미치는 영향과 갈대군락의 증가형태를 파악하기 위해 1999년과 2000년에 갈대군락의 폭을 측정하고 2007년에 갈대군락의 형성정도에 따라 3개 지역을 선정하여 깊이별 저토의 수분함량, 염분농도, 유기물함량, 황함량, 질소함량, 탄소함량 및 수소함량을 조사하였다. 갈대군락의 유무와 관계없이 육지와 멀리 격리되어 있을수록, 수로와 가까이 있을수록 저토 내 수분함량이 많고 염분도가 높았다. 또한 표층의 유기물함량은 갈대의 현존량과 비례하였지만 하층의 것은 오래된 갈대군락에서 오히려 낮았다. 황함량은 나지(0.23%)나 근래에 형성된 갈대군락(0.21%)보다 오래된 갈대군락(0.33%)에서 높았고, 탄소, 질소 및 수소의 함량은 표층에서 현저히 높고 하층에서 낮아 대체로는 유기물함량과 유사한 경향성을 보였지만 하층으로 감에 따라 감소하거나 증가하는 경향은 일치하지 않았다. 갈대군락 폭의 증가는 1999년에 $2.33{\pm}0.73m$, 2000년에 $3.65{\pm}1.64m$이었으며 연도에 따라, 군락에 따라, 방향에 따라 다양하여 일정한 경향성이 없었다. 이러한 갈대군락의 증가 특성에 의해 시간의 경과에 따라 전체적으로 원형의 군락을 이루는 것으로 생각되었다. 매해 증가한 지역에서 갈대의 밀도와 초장은 가장자리로 갈수록 감소하였다. 또한 하나의 군락에서 밀도는 방향(육지 혹은 해양)에 따른 경향성은 없었으나 초장은 북쪽 혹은 육지방향이 남쪽 혹은 해양방향보다 작은 것으로 나타났다.