• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.4
• /
• pp.493-503
• /
• 2019

This study is composed of nine treatments [Control : "no neutralizing layer+vegetation layer" 3 cm, Treatment 1 : "no neutralizing layer+vegetation layer" 5 cm, Treatment 2 : "no neutralizing layer+vegetation layer" 7 cm, Treatment 3 :"neutralizing layer (cement 3 %)+ vegetation layer (cement 1 %)" 3 cm, Treatment 4 : "neutralizing layer (cement 3 %)+vegetation layer (cement 1 %)" 5 cm, Treatment 5 : "neutralizing layer (cement 3 %)+vegetation layer (cement 1 %)" 7 cm, Treatment 6 : "neutralizing layer [$(Ca{\cdot}Mg)CO_3$] +vegetation layer" 3 cm, Treatment 7 : "neutralizing layer [$(Ca{\cdot}Mg)CO_3$]+vegetation layer" 5 cm, Treatment 8 : "neutralizing layer [$(Ca{\cdot}Mg)CO_3$]+vegetation layer" 7 cm] to find out the vegetation effects according to neutralizing layer types of the acid drainage slope. There were no significant differences observed in soil hardness and soil moisture content of neutralizing layer type while highly difference of moisture content was observed according to the neutralizing and vegetation layer thickness. As for soil acidity, strong acid was shown in the control, treatment 1 and treatment 2. Neutralizing effects were outstanding in treatments of 3, 4, 5 (cement treatment group), 6, 7 and 8 (limestone treatment group). Concerning plants growth characteristics, surface coverage rates, number of germinating woody plants, plant height, and plant root status, there were excellent effects observed in the experimental groups mixed with cement (treatments 3, 4 and 5) and limestone (treatments 6, 7 and 8). At the initial stage, however, plant roots were negatively affected in cement layer treatments of 3, 4 and 5. However, no difference was shown in each layer thickness on the acid drainage slope whereas 3~5 cm thickness neutralizing layer was appropriate in consideration of economic feasibility.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.1
• /
• pp.9-17
• /
• 2015

The basic flow configuration is composed of a plane, double shear layer where relatively thin mid gas layer is sandwiched between air and fuel stream. The present study describes numerical investigations concerning the combustion enhancement according to a variation of mid layer thickness. In this case, the effect of heat release in turbulent mixing layers is important. For the numerical solution, a fully conservative unsteady $2^{nd}$ order time accurate sub-iteration method and $2^{nd}$ order TVD scheme are used with the finite volume method including k-${\omega}$ SST model. The results consists of three categories; single shear layer consists of fuel and air, inert gas sandwiched between fuel and air, cold fuel gas sandwiched between fuel and air. The numerical calculations has been carried out in case of 1, 2, 4 mm of mid layer thickness. The height of total gas stream is 4 cm. The combustion region is broadened in case of inert gas layer of 2, 4 mm thickness and cold fuel layer of 4 mm thickness compared with single shear layer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.515-518
• /
• 1997

Resident time of the centrifugal extractor for organic phase extraction using a height controlled separator weir and a divert plate is the important factor that affects significantly the chemical material extraction and the productivity in the chemical and mechanical processes. In this paper, it describes the design of the device for extraction of an organic phase from radioactive wastes, and considers phase separating weir and divert disk, both being designed to be adjustable in their positions, for effectively separating an organic phase. A height-adjustable separating weir unit used for separating the organic phase from the aqueous phase using a phase separating weir and designed to control the height of the separating weir as desired so as to allow the weir to be positioned at a boundary layer between two separated phases. The centrifugal extractor controls satisfactorily the mixed reaction time of two phases within the separator regardless of the variations of the mixing ratio of the two phases and the rotating speed of the extractor, is designed to be adjustable in its position in the vertical direction, thus allowing the user to appropriately select the mixed reaction time of the two phases within the extractor as desired. From development of a centrifugal extractor, it can effectively recover such usable elements, and preferably reducing the output quantity of radioactive wastes.

• Earthquakes and Structures
• /
• v.25 no.2
• /
• pp.135-148
• /
• 2023

The structure-soil-structure interaction (SSSI) effect in adjacent structures may affect the liquefaction-induced damage of shallow foundation structures. The existing studies only analysed the independent effects on the structural dynamic response but ignored the coupling effect of height difference and distance of adjacent structures (F) on liquefied foundations on the dynamic response. Therefore, this paper adopts finite element and finite difference coupled dynamic analysis method to discuss the effect of the F on the seismic response of shallow foundation structures. The results show that the effect of the short structure on the acceleration response of the tall structure can be neglected as F increases when the height difference reaches 2 times the height of the short structure. The beneficial effect of SSSI on short structures is weakened under strong seismic excitations, and the effect of the increase of F on the settlement ratio gradually decreases, which causes a larger rotation hazard. When the distance is smaller than the foundation width, the short structure will exceed the rotation critical value and cause structural damage. When the distance is larger than the foundation width, the rotation angle is within the safe range (0.02 rad).

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2004.11a
• /
• pp.35-36
• /
• 2004

A total of 1.200 eggs obtained from 312-day-old Hy-line Brown layer breeder hens and 319-day-old Hy-line Brown commercial layer hens (600 eggs obtained from each ones) were used to investigate the effects of storage period, storage temperature, and insemination of hens on the change of albumen height, Haugh unit (HU), albumen pH, shell strength, and yolk color. Eggs were stored up to 14 days after lay at $3\;^{\circ}C\;or\;10\;^{\circ}C$ and sampled one day after stored and then 24 hours interval. Longer periods of storage resulted in lower albumen height and HU at both storage temperatures, but in higher albumen pH. The eggs stored at $3\;^{\circ}C$ were generally higher in HU and lower in albumen pH than the ones stored at $10\;^{\circ}C$. There was no statistically difference although the eggs obtained from the non-inseminated-hens were slightly higher in albumen height and HU than the eggs obtained from the inseminated-hens. Whereas, the eggs obtained from the non-inseminated-hens in the albumen pH of eggs stored at $3\;^{\circ}C$ was significantly (P<0.05) higher than the ones obtained from the inseminated-hens, but the albumen pH of eggs stored at $10\;^{\circ}C$ did not differ each other. The mean shell strength of the eggs obtained from the inseminated-hens was significantly (P<0.05) stronger than that of the eggs obtained from the non-inseminated-hens at both storage temperatures. Albumen height and albumen pH were negatively correlated(P<0.01~0.001) in both inseminated and non-inseminated-hen's egg groups. The degree of yolk colors were not significantly changed overall of the experimental periods in both storage temperatures. The study suggests that the change of egg freshness such as albumen height and HU are relatively more associated with storage period and storage temperature than insemination or non-insemination of hens.

• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1485-1496
• /
• 2002

In order to investigate the fire-induced smoke movement in a three-dimensional room with an open door, numerical and experimental study was performed. The center, wall, and corner fire plumes for various sized fires were studied experimentally in a rectangular pool fire using methanol as a fuel. The numerical results from a self-developed SMEP (Smoke Movement Estimating Program) field model were compared with experimental results obtained in this and from literature. Comparisons of SMEP and experimental results have shown reasonable agreement. As the fire strength became larger for the center fires, the air mass flow rate in the door, average hot layer temperature, flame angle and mean flame height were observed to increase but the doorway-neutral-planeheight and the steady-state time were observed to decrease. Also as the wall effect became larger in room fires, the hot layer temperature, mean flame height, doorway-neutral-planeheight and steady-state time were observed to increase. In the egress point of view considering the smoke filling time and the early spread of plume in the room space, the results of the center fire appeared to be more dangerous as compared with the wall and the corner fire. Thus it is necessary to consider the wall effect as an important factor in designing efficient fire protection systems.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1730-1733
• /
• 2007

As semiconductor and MEMS devices become smaller, testing process during their production should follow such a high density trend. A circuit inspection tool "probe card" makes contact with electrode pads of the device under test (DUT). Nowadays, electrode pads are irregularly arranged and have height difference. In order to absorb variations in the heights of electrode pads and to generate contact loads, contact probes must have some levels of mechanical spring properties. Contact probes must also yield a force to break the surface native oxide layer or contamination layer on the electrodes to make electric contact. In this research, new vertical micro contact probe with bellows shape is developed to overcome shortage of prior work. Especially, novel bellows shape is used to reduce stress concentration in this design and stopper is used to change the stiffness of micro contact probe. Variable stiffness can be one solution to overcome the height difference of electrode pads.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.2
• /
• pp.55-65
• /
• 2008

This study was surveyed to analyze vegetation structure of mountainous wetlands in Chung-ju city and around area from September to November, 2006. 6 sites of total 15 potential mountainous wetlands were discriminated throughout field survey. By classification system of mountainous wetlands presented in manual of forest wetlands research, types of wetlands were classified into slant and a flat. Many sites were covered with land plants as Pueraria thunbergiana and so on. To understand vegetation structure of mountainous wetlands, Height, DBH (diameter at breast height), DI (Dominance Index), Sociability and Constancy were surveyed and Based on this result, a projection chart was drawn. As results, Salix koreensis in tree layer and Persicaria thunbergii and Impatiens textori in herb layer were surveyed as broadly distributed species. This study is mainly focused on vegetation condition of mountainous wetlands. But, it will be needed studying on classification system of mountainous wetland type and functional assessment for conservation or management of wetlands.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.1
• /
• pp.1-13
• /
• 2010

This study was accomplished to identify and analyze vegetation structure of Mountainous Wetlands in Dan-yang and around area, and surveyed from September to November, 2006. 6 sites of total 16 potential Mountainous Wetlands by GIS based wetland forecasting system (Korea National Arboretum, 2006) were identified as wetlands throughout field survey by the indicators such as hydrology, soil and vegetation. By classification system of Korea National Arboretum (2006), types of wetlands were classified into 3 slope-types and 3 flat-types. To understand vegetation structure of wetlands, height, DBH (diameter at breast height), DI (Dominance Index), sociability and constancy were surveyed and the projection diagram and charts ware drawn. As results, Salix koreensis in woody plant layer and Persicaria thunbergiiin and Juncus effusus var. decipiens in herb layer were surveyed as broadly distributed species. The wetlands of Dan-yang around area were similar to those of Chung-ju around area, but the species of plants and hydrology conditions were different. This study is mainly focused on vegetation condition of Mountainous Wetlands. But, further studies on functional assessment for management and restoration of wetlands were necessary.

• Journal of Plant Biology
• /
• v.35 no.2
• /
• pp.125-134
• /
• 1992

Taxonomic account is given to the five species of Scytosiphonaceae, Colpomenia peregrina (Sauvageau) Hamel, Endarachne binghamiae J. Agardh, Hydroclathrus clathratus (C. Agardh) Howe, Petalonia fascia (O. F. Muller) Kuntze, and Scytosiphon lomentaria (Lyngbye) Link, collected from Ullungdo Island, Korea. C. peregrina, introduced for the first time in Korea, is similar to C. sinuosa (Roth) Derbes et SolieI in outer appearance but is distinguished by absence of cuticle over the plurilocular sporangial sori. E. binghamiae accords well with American plants but varies in height and width of the thallus according to seasons. H. clathratus has small cortical cells and large clear medullary cells. P fascia is characterized by one to two celled small cortical layer and two to four celled large medullary layer. S. lomentaria shows variation in gross morphology, especially in height and width of thallus according to seasons.easons.