• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.3
• /
• pp.401-410
• /
• 1992

The purpose of this study was to investigate the dimensional changes and surface morphology of dentures processed by various polymerization conditions. The measurements were done by taking radiograph and using vernier calipers and each specimen was observed on scanning electron microscope. Results obtained were as follows. 1. The difference of dimensional stability was not recognized between various polymerization conditions(heat-cured resin, pour-type resin, microwave-cured resin, and injection molding resin). 2. There were expansion and shrinkage in the occlusal dimension, shrinkage in the frontal dimension, and expansion in the lateral dimension. 3. Scanning electron microscope pictures of heat-cured resin showed dense and regular surface morphology. 4. Microwave-cured resin surface appeared more regular and smooth than pour-type resin but less dense and more irregular than heat-cured resin. 5. Scanning electron microscope pictures of pour-type resin with the lowest dimensional change showed the most irregular surface morphology.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.17 no.1
• /
• pp.163-171
• /
• 1987

The author has clinically and radiologically investigated 57 cases of odontogenic keratocyst in 47 patients consisted of 26 males and 21 females aged from.2 to 63 years, who were pathologically diagnosed as odontogenic keratocyst at infirmaries of dental colleges, Yonsei University and Seoul national university during 1965-1986. The results were as follows: 1. The peak incidence of the disease was on their teenagers (29.8%). The ratio of Male/Female was 1.23:1 and incidence rate of males showed higher than their counterpart. 2. The most frequent complaints were swelling in (65.9%) followed by pus discharge, unknown mass, pain, residual root. 3. The most common site was mandibular third molar and mandibular ramus region (15.8%) followed by mandibular body and ramus, mandibular third molar, mandibular anterior teeth. Incidence of this disease in mandible was higher than in maxilla. 4. The lesions not associated with adjacent teeth were (14.0%) and in the lesions associated with adjacent teeth (35.1%) showed root resorption, (50.9%) were without root resorption, (35.1%) showed tooth migration and (50.9%) were without tooth migration. 5. The border types of the lesions were scalloped type in (52.6%), smooth type in (47.4%) and morphological type were unilocular in (50.9%), multilocular in (49.1%). 6. The radiologic cyst type of the lesions were follicular type (42.1%) followed by primordial, unclassified odontogenic, residual, lateral periodontal, median mandibular, globulomaxillary type.

• Journal of Korean Physical Therapy Science
• /
• v.16 no.2
• /
• pp.11-17
• /
• 2009

Background: The purpose of this study was to investigate the effects of the body alignment on the type and weight of the bag. Methods: The Subjects(n=62) measured posture alignment and make out the questionnaire. The questionnaire item was type of the bag, weight of the bag, side which carries the bag, and time to carry the bag. The posture alignment measured by global posture system(GPS). GPS Measurement was ASIA, acromion process, medial malleolus on Frontal plane, ear, shoulder joint, knee joint, lateral malleolus on sagittal plane, and trunk rotation on transverse plane. Results: The backpack and shoulder bag was no significant. The width of the strap bag was not significant. The side which carries on shoulder bag was statistical significance(p<.05). The time to carry the bag was statistical significance on change of posture(p<.05). A bag weight was no significant. Conclusion: This research provides the direction and carry the bag in time for the posture. This study showed that type and weight of bag does affect body alignment. This indicates that there is an interaction that plays a crucial roles in the type and weight of bag and the body alignment.

• The korean journal of orthodontics
• /
• v.17 no.1
• /
• pp.23-32
• /
• 1987

There are variations in regional cranial and facial balance as a normal developmental process and regional imbalances often tend to compensate each other to provide functional equilibrium. This study was designed to analyse the patterns of morphologic harmony and inharmony inherent in normal occlusion and malocclusion. The subjects consisted of 92 individuals with normal occlusion and 60 Class III malocclusion patients. Their lateral cephalograms were traced and analysed using the counterpart analysis described by Enlow. The normal occlusion group was divided into Normal Types A and B according to the relative positions of Points A and B. The following conclusions were reached: 1 The normal occlusion consisted of $28.3\%$ of Normal Type A and $69.6\%$ of Normal Type B. 2. The Normal Type A and B differed from each other in the morphology of the cranial base, the mandibular ramus and corpus, and the functional occlusal plane. The Normal Type B showed considerable mandibular protrusion effect in the effective dimension and alignment of the above factors. 3. Most normal individuals showed some degree of disharmony among morphologic factors but the deviations were relatively small. 4. The Normal Type B was less balanced than the Normal Type A. 5. More regional imbalances were involved in Class III malocclusion and the imbalances were more severe.

• Fashion & Textile Research Journal
• /
• v.4 no.1
• /
• pp.64-70
• /
• 2002

The purpose of this study is to know the change of somatic characteristics according to the time. To find out the change of body type of the early twenties who were in 1990 and 1999, the anthropometric and the photographic measurements of the two periods were compared respectively. T-test was applied and the figure of body frame and lateral body type were analyzed. By comparing the anthropomentric measurements of 1999 with 1990, it was known that the proportion of lower half of body increased and the legs and arms became longer. The shape of bust was slightly centered and the angle of shoulder decreased. From the analysis of the photographic measurements and the comparison the body type of 1999 with that of 1990, the tendency of change in upper body was to bend backward and the ratio of straight type increased in 1999.

• Journal of the Korean Home Economics Association
• /
• v.34 no.2
• /
• pp.183-199
• /
• 1996

The objective of this study was to provide fundamental data on somatotype for elderly women by classifying the somatotype and analysing the 3 characteristics of their somatotype. The subject were 368 women of 60~84 years old, they were analyzed indirect photography. To find out differences among the age groups, the 368 subjects were grouped into two age groups (Group 1 ; age 60 to 69, Group 2 ; aged 70 to 84). Data were analyzed using Factor analysis, Cluster analysis, duncan test and Analysis of variance. Through the factor analysis, 27 items from photometric measurements respectively. Cluster analysis was applied for classification of somatotype. The results of this study were as follows. 1. The characteristics of Elderly women's somatotype were bending of the upper-torso, fatness of the waist and abdomen, drooping of the bust and shoulder and hip. In addition, height, girth, depth and width items were decreased in their sizes respectively. 2. The characteristics of clusters were as follows. Type 1 was straight somatotype in which the plumb line through tragion, the bust depth and under bust depth region laterally. Type 2 was swayback somatotype in which the upper portion of protruding point on the back was bent forward but the lower portion of protruding point had a characteristics of turning over somatotype. Type 3 was bending somatotype. Namely, this type was shorter than average and below the average fatness. Generally, the lateral view silhouette of elderly women was the straight type and changed into bending type as the age increases.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.5 no.2
• /
• pp.155-160
• /
• 2006

Purpose: To evaluate the results of meniscal repair and partial meniscectomy of lateral meniscus injury associated with tibial plateau fracture. Materials and Methods: Between February 1993 and August 2004, 24 cases (23 patients) of lateral meniscus tear with tibial plateau fracture were evaluated retrospectively. The most frequent type of tear was the longitudinal tear of the meniscocapsular junction (14 cases, 66.7%). All fractures were reduced under the control of arthroscopic and image intensifier. Arthroscopic repair of the longitudinal tear of the lateral meniscus or arthroscopic partial meniscectomy was performed. The final results were evaluated with the Ikeuchi criteria and Lysholm score. Results: At the final follow-up, the outcome was excellent in 12 cases (85.7%), good in 1 case (7.1%) and fair in 1 case (7.1%) among 14 cases of meniscal repair, and the excellent in 4 cases (66.7%) and good in 2 cases (33.3%) among 6 cases of partial meniscectomy according to the Ikeuchi criteria, There was a significant improvement of Lysholm score after surgery, 92.3 postoperatively compared with 56.6 preoperatively (p<0.0001, paired t-test). Conclusion: The fracture of the lateral tibial plateau did not seem to affect on the healing of the meniscus repair and partial meniscectomy.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.691-704
• /
• 2007

Between 1997 May and 2007 May, One hundred and seventeen patients were treated. There were 129 cases of sinus elevation using a lateral window opening procedure and 258 implants placed simultaneously or delayed. The cumulative survival rate of the implants calculated. The implants were evaluated according to surgical site, quality and quantity of bone, graft material, membrane used, the length and diameter of the implant and complications. 1. The 10-year cumulative survival rate of the implants by sinus augmentation using lateral window approach was 96.90%. 2. There was no difference in the survival rate between the implant placed simultaneously with sinus elevation (one stage) and the procedure performed in the delayed procedure (two stage). 3. There was no difference in the survival rate according to the type and amount of graft materials. 4. There was no difference in the survival rate according to the implant site, bone quality and quantity. 5. There was no difference in the survival rate when the $CollaTape^{(R)}$ or Gore-Tex was placed in the window of the lateral wall. 6. There was no difference in the survival rate of the implant length and diameter. 7. The survival rate was as low as 75.00% when there were more than two complications. Implant placement with sinus augmentation using the lateral window approach is a predictable treatment method. Although the vertical height of residual ridge is insufficient and the quality of bone is poor, the normal survival rate of the implants would be expected if an appropriate graft material and membrane is used with greater effort to prevent complications.

• Journal of Fashion Business
• /
• v.6 no.6
• /
• pp.78-88
• /
• 2002

The purpose of this study is to provide for some basic data useful to production of the apparels fit and measured well for the Chinese men. For this purpose, 389 men aged between 20 and 49 and living in Beijing and Shanghai, China were sampled to be measured for their constitutions. Then, their constitutions were classified and thereupon, according to the Men's Wear Specifications (GB/T 1335.1-1997), National Standards of People's Republic of China. The collected data were statistically processed using SAS 6.12 for technical statistical analysis, correlation analysis, factor analysis, group-wise analysis. The results of this study can be summarized as follows; 1. As a result of the factor analysis aiming to determine Chinese men's constitutional components, five components could be identified: constitutional obesity, lateral body size, longitudinal body size, shoulder and back width, and shoulder drooping. 2. As a result of classifying Chinese men's constitutions according to drop measurements, four types could be identified. Y type had the lowest obesity and the highest longitudinal body size. A type had a lower obesity and had an average longitudinal body size. B Type had the second highest obesity, the smallest longitudinal body size and shoulders/back width. C Type had the highest obesity, upper body length and shoulders/back width. 3. In terms of distribution, 'B' type (39.10%) of the sample, followed by 'A' type (29.26%), 'C' type (19.95%) and 'Y' type (11.70%). In all, the results of this study suggests that 'B' type represents the Chinese men in contrast with GB specifying that 'A' type represents the Chinese men. On the other hand, Beijing region was dominated most by 'B' type (37.06%), followed by 'A' type (28.82%), 'C' type (22.35%) and 'Y' type (11.76%), while Shanghai region was dominated most by 'B' type (41.13%), followed by 'A' type (31.21%), 'C' type (19.15%) and 'Y' type (8.51%).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.136-143
• /
• 2004

The purpose of this study was to investigate the relationship between morphology and position of deciduous double teeth, and the occurrence of other dental anomalies in the same subject. Four morphological types were indentified according to Ailing's classification: type I, bifid crown-single root; type II, large crown-large root; type III, two fused crowns-single root; type IV, two fused crowns-two fused roots. Fifty-four double teeth were found in a total of 1,803 children, who had visited Wonkwang university hospital for dental treatment from January 1, 2003 to September 30, 2003. All of these children were examined clinically and intra-oral radiographs were taken. The results were as follows; 1. 49 children(2.7%) had more than one double teeth, 5 of these children had two double teeth on the bilateral side. And one child showed triple teeth which has three crowns and three roots. 2. Double teeth were predominantly situated in the anterior region, with a preference for the mandible. The ratio of cases involving central incisor and lateral incisor was higher than other cases. 3. There were 25 cases(46.2%) of missing successors among 54 cases of the double teeth. And, prevalence of the missing teeth was highest in the cases involving maxillary central incisor and lateral incisor. 4. In the case of type II(large crown-large root) had more missing successors.