• Annals of Clinical Neurophysiology
• /
• v.8 no.1
• /
• pp.63-70
• /
• 2006

Background: Testosterone is reported to have neuroprotective effect in various neurological diseases. Recently, the mechanism involved in nitric oxide (NO)-mediated motor neuron death is under extensive investigation. The Cu/Zn-superoxide dismutase (SOD1) mutations has been implicated in selective motor neuron death of amyotrophic lateral sclerosis (ALS) and it is said to play an important role in NO-mediated motor neuron death. However, neuroprotective effect of testosterone on motor neuron exposed to NO has rarely been studied. Methods: Motor neuron-neuroblastoma hybrid cells expressing wild-type or mutant (G93A or A4V) SOD gene were treated with $200{\mu}M$ S-nitrosoglutathione. After 24 hr, cell viability was measured by MTT assay. To see the neuroprotective effect of testosterone, pretreatment with 1 nM testosterone was done 1 hr before S-nitroglutathione treatment. To study the mechanism of protective effect, $20{\mu}M$ flutamide (androgen receptor antagonist) was also pretreated with testosterone 1 hr before S-nitroglutathione treatment. Results: S-nitrosoglutathione showed significant neurotoxic effect in all three cell lines. Percentage of cell death was somewhat different in each cell line. 1 nM testosterone showed neuroprotective effect in G93A and wild-type cell line. In A4V cell line, testosterone did not showed neuroprotective effect. The neuroprotective effect of testosterone was reversed by $20{\mu}M$ flutamide. Conclusions: These results indicate that testosterone induces neuroprotection in NO-mediated motor neuron death directly through the androgen receptor. This neuroprotective effect of testosterone varies according to the types of SOD1 gene mutation. These data suggest that testosterone may be of therapeutic value against ALS.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.1
• /
• pp.53-67
• /
• 2020

The purpose of this study is to analyze the foot shape and size specification of male high school students. 3D modeling programs such as 'Artec Studio', 'CATIA', and 'Auto CAD' measured the 3D scan data of 361 male high school students provided by KATS. Through principal factor analysis, 10 factors were extracted, including foot length, medial-lateral ratio, and foot length ratio. As the result of the cluster and ANOVA with post-hoc test (Duncan method), the differences among types were clarified. Type 1 (24.7%) represented outward medial-lateral ratio (M-L ratio) with the lowest instep, ankle and little deformed first toe. Type 2 (41.8%) was characterized by the shortest, even M-L ratio, thin ankle and heel, the highest instep and ankle. Type 3 (33.5%) showed the longest, inward M-L ratio, thick ankle and heel, and deformed first toe. As the cross-tabulation of foot length and ball circumference, 17.2 percent was not covered by KS standard; in addition, the foot length was longer than the KS standard. The correlation analysis of key dimensions showed that foot length and ball circumference were highly correlated with other items; therefore, regression equations were derived to estimate other foot measurements using these two items as independent variables.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6A
• /
• pp.425-433
• /
• 2011

In this study, in order to investigate the wave-induced buoyancy effects, experimental studies were conducted on pontoon-type floating structures. A series of small-scale tests with various wave cases were performed on the pontoon models. A total of four small-scale pontoon models with different lateral shapes and bottom details were fabricated and tested under the five different wave cases. Six hydraulic pressure gauges were attached to the bottom surfaces of the pontoon models and the wave-induced hydraulic pressure was measured during the tests. Finally, hydraulic pressures subjected to the bottoms of the pontoon models were compared with each other. As the results of this study, it was found that whereas the waffled bottom shape hardly influenced the wave-induced hydraulic pressure, the hybrid lateral shape significantly influenced the wave-induced hydraulic pressure subjected on the bottoms of floating structures. The air gap effects of the hybrid shape contribute to decreasing the wave-induced hydraulic pressure due to absorption of wave impact energy. Compared with box type, the hydraulic pressures of the hybrid type were about 83% at the bow, 74% at the middle, and 53% at the stern.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.217-227
• /
• 2013

Objective: The purpose of this study was to analyze 'response time', 'peak response time' and 'overshoot value' for each muscle by applying the EMG signal to the vehicle response in ISO 7401 and to quantify the response of the driver according to vehicle characteristics by comparing vehicle characteristics and muscle responses of the driver. Background: The Open-loop test defined in international standards ISO 7401 is the only method for evaluating the performance of the vehicle. However, this test was focused only on mechanical responses, not driver's ones. Method: One skilled male driver(22 yrs. experience) was participated in this experiment to measure muscle activities of the driver in transient state. Then the seven muscle signals were applied to calculate 'response time', 'peak response time', and 'overshoot value'. Results: In the analyses of the EMG data, the effects of vehicle type and muscle were statistically significant on the 'response time' and 'peak response time'. Also, the effects of vehicle type, muscle, and lateral acceleration level were statistically significant on the 'overshoot value' in this study. According to the analyses of the vehicle motion data, vehicle motion variable(LatAcc, Roll, YawVel) was statistically significant on the 'response time' and vehicle type, vehicle motion variable, and lateral acceleration level were statistically significant on the 'peak response time', respectively. Conclusion: In the analyses of the 'response time' and 'overshoot value', the data of muscle activities(EMGs) was better index that could evaluate the vehicle characteristic and performance than the data of vehicle motion. In case of peak response time, both EMG and vehicle motion data were good index. Application: The EMGs data from a driver might be applicable as index for evaluation of various vehicle performances based on this study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.339-345
• /
• 2021

Finite element analysis of the silo type underground opening for low- and intermediate-level radioactive waste (LILW) disposal facilities in Korea is presented in this study. The silo wall is circular and the roof is made up of domes. The silo wall is 25 meters in diameter, 35 meters in height, and the dome is 30 meters in diameter and 17.4 meters in height, and it is located at -80 meters to -130 meters at sea level. Although six silos have been constructed in the first stage and are in operation, only one silo was considered in this study. The two-dimensional axial symmetric finite element model, as well as the three-dimensional finite element model were made using the computer program SMAP-3D. Generalized Hoek and Brown Model was used for the numerical analyses. The finite element analysis of the silo type underground opening was carried out under various lateral pressure coefficients (defined as ratio of average horizontal to vertical in-situ stress), and the numerical results of these analyses were examined.

• The Korean Journal of Pain
• /
• v.32 no.4
• /
• pp.307-312
• /
• 2019

Background: The aim of this study was to clarify the topographical relationships between the dorsal scapular nerve (DSN) and the dorsal scapular artery (DSA) in the interscapular region to identify safe and convenient injection points related to DSN blockade. Methods: Thirty shoulders of embalmed Korean cadavers and 50 live subjects were used for dissection and ultrasound (US) analysis. Results: The running patterns of the DSA and DSN in the interscapular region were classified into 3 types. Type I was defined as nerves that were medial to the artery and parallel without changing location (80.0% of specimens). In type II (13.3%), the nerve and artery traversed one another only one time over their entire length. In type III (6.7%), the nerve and artery traversed one another, resembling a twist. Above the level of the scapular spine, the nerve was always medial to the artery. Below the scapular spine, the number of arteries was obviously decreased. Most of the arteries were lateral to the medial border of the scapula, except at the level of the superior angle of the scapula artery (SA). The positional tendency of the DSN toward the medial or lateral sides from the medial border of the scapula was similar. In US imaging of live subjects, the DSA was most observed at the level of the SA (94.0%). Conclusions: Results of this study enhance the current knowledge regarding the pathway of the DSN and DSA and provide helpful information for selective diagnostic nerve blocks in the interscapular region.

• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.683-692
• /
• 2011

In piloti-type low-rise RC residential buildings, severe damages have been usually concentrated at piloti stories under the earthquake. In this study, a piloti story was retrofitted by installation of buckling-restrained braces (BRB's) to increase strength and stiffness of piloti story and by application of fiber reinforced polymer (FRP) sheet on columns to avoid the brittle shear and axial failure of columns. To verify this retrofit performance, reversed cyclic lateral load tests were performed on 1:5 scale bare and retrofitted frames. The test results showed that yield strength (43.2 kN) appeared to be significantly larger than design value (30 kN) due to the increase of strength in the compression side, but the stiffness value (11.6 kN/mm) turned out to be approximately one-half of the design value (24.2 kN/mm). The reasons for this difference in stiffness were due to slippage at joint between the frame and the BRB's, displacement and rotation at footing. The energy absorption capacity of the retrofitted frame was 7.5 times larger than that of the bare frame. The change of the number of load cells under the footing from 2 to 1 reduced lateral stiffness from 11.6 kN/mm to 6 kN/mm, which was only three times larger than that of the bare frame (2.1 kN/mm).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.159-164
• /
• 2009

The difference of ginsenosides content according to placement of ginseng planting (line) under shading net in 5-year-old ginseng roots were examined. The total saponin ($Rb_1$, $Rb_2$, Rc, Rd, Re, and $Rg_1$) contents were 15.01 mg/g and 21.79 mg/g in the main roots, 35.93 mg/g and 43.32 mg/g in the lateral roots, 87.85 mg/g and 105.51 mg/g in the fine roots for the front $1st{\sim}2nd$ lines in Yunpoong and Landrace variety (purple-stem variant), respectively. In the middle $3rd{\sim}5th$ lines the total saponin contents were 18.73 mg/g and 23.19 mg/g in the main roots, 44.92 mg/g and 43.50 mg/g in the lateral roots, 92.97 mg/g and 110.70 mg/g in the fine roots in Yunpoong and Landrace variety, respectively. In the rear $6th{\sim}7th$ lines the total saponin contents were 21.88 mg/g and 26.68 mg/g in the main roots, 38.41 mg/g and 44.89 mg/g in the lateral roots, 101.03 mg/g and 107.06 mg/g in the fine roots in Yunpoong and Landrace variety, respectively. The differences in total and individual ginsenosides content in the main, lateral and fine roots among the lines were not significant but total ginsenosides contents in the main roots were different in case of Yunpoong variety. The ratios of protopanaxadiol (PD) type saponin to protopanaxatriol (PT) type saponin in roots were lower in the front lines compared to the middle and rear lines and the ratios were significantly different among the parts of roots.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.2
• /
• pp.130-135
• /
• 2013

Purpose: Preshaped Locking compression plate(LCP) has holes with fixed angle between screw and plate and have advantage firm fixation because it has stability of angular and axial deformity. We evaluated usefulness of LCP after open reduction and internal fixation in distal fibular fracture. Materials and Methods: Between December 2011 and May 2012, 23 patients with fracture of distal fibula were followed up at least 12 months underwent open reduction and internal fixation with LCP. There were 15 males and 8 females with a mean age 39.8(20~69) years. According to Danis-Weber classification, there were 20 cases of type B and 3 cases of type C. There were 13 cases of isolated lateral malleolus fractures, 1 case of bimalleolar fracture, 6 cases of trimalleolar fractures and 3 cases of distal tibia fractures with proximal fibula fracture. Intraoperatively, we assessed whether preshaped LCP fit lateral margin of distal fibula or not and evaluated quality of reduction and postoperative complications. The cases were analyzed by radiological bone union time and clinical results according to the criteria of Meyer Results: Of all cases, complete bone union was achieved and average radiological bone union time was 7.3(6~12) weeks. The clinical results were excellent in 18 cases(78%), good in 5 cases(22%). There were 5 cases of plate with 3 holes, 13 cases of plate with 4 holes, 2 cases of plate with 5 holes, 1 case of plate with 6 holes and 2 cases of plate with 7 holes. The average number of screws at proximal fragement was 2.5 and at distal fragment was 3.5. In 14 cases (60.8 %), we needed re-bending of plate because the distance between plate and lateral cortical margin of distal fibula was more than 5 mm at anteroposterior X-ray after reduction. All cases have anatomical reduction and there were no complications of wound infections. There were no complaint about hardware irritation. Conclusion: At fractures of distal fibula,preshaped LCP had a excellent stability although far cortex was not fixed with screw and bending of plate. And there are less complications of hardware irritation and wound problems. But, Some complement would be needed because there were no complete fitting between precontour of LCP and lateral cortical margin of distal fibula.

• Korean Journal of Head & Neck Oncology
• /
• v.21 no.2
• /
• pp.201-207
• /
• 2005

Purpose: Submandibular gland tumor is rare, less than 6% of head and neck tumor. The purpose of this article is to analysis the clinical experience and treatment outcomes of malignant submandibular gland tumor, suggesting a guideline of management. Methods: We retrospectively evaluated 26 patients who underwent operation for malignant submandibular gland tumor at Severence hospital between 1986 and 2004. Statistical analysis was performed by Kaplan-Meier method, log rank test, Chi-square test, Fisher's exact test using SPSS v12.0 for Windows. Results: They consisted of 18 males and 8 females whose median age was 47 years(range: 20-71). 10 cases of adenocystic carcinoma, 8 cases of carcinoma ex pleomorphic adenoma, 4 cases of mucoepidermoid carcinoma, 1 case each for acinic cell carcinoma, undifferentiated carcinoma, adeno carcinoma, epithelioid hemangioendothelioma. Sialoadenectomy only was performed in 10 cases(36.5%) and sialoadenectomy with neck node dissection was performed in 16 cases(63.5%). Adjuvant radiotherapy was done in 22 cases(84.6%). 10 year disease free survival rate for malignant submandibular gland tumor was 63.1 % and 10 year overall survival rate for malignant submandibular gland tumor was 70.1%. In univariate analysis, prognostic factors affecting recurrence of malignant submandibular gland tumor was initially papable lateral neck node in physical examination and metastasis of lateral neck node in pathologic confirmation. The prognostic factors affecting survival of malignant submandibular gland tumor was tumor size, TNM stage, recurrence and type of recurrence. Conclusion: In this study, prognostic factors affecting recurrence of malignant submandibular gland tumor was initially papable lateral neck node in physical examination and metastasis of lateral neck node in pathologic confirmation. The prognostic factors affecting survival of malignant submandibular gland tumor was tumor size, TNM stage, recurrence and type of recurrence. To prevent recurrence and to improve survival, early diagnosis and aggressive surgery must be considered.